Honeywell T6/T6R Smart Thermostat User Guide

Quick Guide

Online Guides

http://hwllhome.co/eut-T6

For help, contact:
WEB: getconnected.honeywellhome.com
PHONE: 0300 130 1299
First step is to download the Honeywell Home-app from the App store or Google Play store:
Honeywell Home-app

With the Honeywell Home-app your thermostat will be connected with your own 2,4 GHz Wi-Fi network and registered to your account, after this you can control the thermostat remotely.

TIP: Make sure you have a 2.14GHz Wi-Fi network. The thermostat does not work on 5 GHz networks. When in doubt. check with your Internet provider or modem settings.

1. Create account
   
   Create account with your email and activate from the email you receive back.
2. Log on
   
   Log on and select the thermostat you have.
3. Status thermostat
   
   Press ”Yes’ in the following screens.
   
4. Select
   
   Select the thermostat (Name same as displayed on thermostat-screen)
5. Wi-Fi network
   
   Select your Wi-Fi network and the ‘Next’.
6. Wi-Fi connect
   
   Thermostat Connects with your Wi-Fi network.
   
   When successful press ‘Done’ thermostat shows ‘Conected.
7. Conect
   
   Press “Next”
8. Secure
   
   Enter the Code displayed on Thermostat.
9. Configure
   
   Select Language and clock setting…
10. Configured
    
    … and the ‘Next’
11. Complete config
    
    Press ‘Next’
12. Location
    
    Choose a name for your location.
13. Name
    
    … Then a name for the thermostat.
14. Register
    
    The Thermostat is now being registered to your account. This can take some minutes.
15. Registered
    
    Thermostat is connected and registers, press ‘Next’
16. Geofence
    
    Geo fencing can be set or skipped.
17. Siri set up
    
    Siri can be set up or skipped.
18. Completed
    
    Registration is complete and choose ‘Done’

ANDROID

1. Create account
   
   Create account with your email and activate from the email you receive back
2. Log on
   
   Log on and select the thermostat you have.
3. Thermostat
   
   Press ‘Yes’ in the following screen.
4. Start Network
   
   Press ‘Next after pressing 5 sec on the thermostat.
5. Wi-Fi network
   
   The Android-app goes to the Wi-Fi Setting, Choose ‘Next’.
6. Select
   
   
   Select the Thermostat (Name displayed on the thermostat-screen).
   
   Press Dismiss and the back of Phone.
7. Connect
   
   Press’Next’
8. Secure
   
   Enter the code displayed on thermostat.
9. Configure
   
   Select Language and clock setting…
10. Configured
    
    — and the ‘Next’.
11. Compl. config.
    
    Press ‘Next’.
12. Wi-Fi
    
    Press ‘OK’ after reading the warning.
13. Select Wi-Fi
    
    Select your Wi-Fi network and then ‘Next’.
    Enter your Wi-Fi password and then ‘Next’.
14. Connecting
    
    Thermostat makes connection with your Wi-Fi network and shows ‘SUCCESS’
    
15. Location
    
    Choose a name for your location.
16. Name
    
    … Then a name for the Thermostat.
17. Select Wi-Fi
    
    Select your Wi-Fi network and then ‘Next’.
18. Register
    
    The Thermostat is now being registed to your account this can take some minutes.
19. Geofence
    
    Geofencing can be set or skipped.
20. Completed
    
    Registration is Complete and choose ‘Done’.

Wi-Fi is a registered trademark of Wi-Fi Alliance.

T6-T6R-REG-ENOH 8620 NL01 1019

2019 Resideo Technologies, Inc

www.resideo.com
This product is manufactured by Resideo and its affiliates. The Honeywell Home Trademark is used under license from Honeywell international Inc. All rights reserved.

Documents / Resources

Honeywell T6/T6R Smart Thermostat [pdf] User Guide T6, T6R, Smart Thermostat, Thermostat

References

• User Manual