HOMCOM 83A-196V80 Basic Fabric Cutting Table
Precaution
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Operation Instructions
- Please confirm that all components are present before beginning assembly.
- For the protection of your furniture, place all parts on a clean and smooth surface to prevent any damage.
- Please assemble the furniture with 2 person or more.
- Do not confuse similar screws.
- Do not tighten bolts fully until all parts are connected!
- Please periodically check all fitting and re-tighten as necessary.
EXPLOSION FIGURE
Parts
Hardware
Installation
Contact
US
- If you have any questions, please contact our customer care center.
- Our contact details are below:
- 001-877-644-9366
- customerservice@aosom.com
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
CA
- If you have any questions, please contact our customer care center.
- Our contact details are below:
- 416-792-6088
- customerservice@aosom.ca
- Imported by Aosom Canada Inc.
- 7270 Woodbine Avenue, Unit 307, Markham,
- Ontario Canada L3R 4B9
- MADE IN CHINA
UK
- If you have any questions, please contact our customer care center.
- Our contact details are below: 0044-800-240-4004
- enquiries@mhstar.co.uk
- IMPORTER ADDRESS:
- MH STAR UK LTD Unit 27, Perivale Park, Horsenden Lane SouthPerivale, UB6 7RH
- MADE IN CHINA
Frequently Asked Questions
- Q: How many people are recommended for assembling the furniture?
- A: It is recommended to assemble the furniture with at least 2 persons to ensure proper assembly and safety.
- Q: What should I do if I have spare screws left after assembly?
- A: Spare screws are provided for your convenience in case of loss or damage to any original screws. You can keep them for future use or discard them safely.
- Q: How often should I check the fittings of the furniture?
- A: It is advisable to periodically check all fittings and re-tighten them as necessary to maintain the stability and integrity of the furniture over time.
Documents / Resources
 | HOMCOM 83A-196V80 Basic Fabric Cutting Table [pdf] Instruction Manual 83A-196V80 Basic Fabric Cutting Table, 83A-196V80, Basic Fabric Cutting Table, Fabric Cutting Table, Cutting Table |