HDWR HD6700 Code Reader User Manual

Contents hide

Specifications:

Supported Barcodes: 128, UCC/EAN-128, Code 39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 2 of 5, Interleaved 2 of 5 (ITF), Standard 2 of 5, Matrix 2 of 5

Kit Contents:
Ensure all components listed in the kit contents are present before proceeding.

Pairing the Scanner with the USB Receiver:

To pair the reader with a USB receiver for radio communication, scan the provided code.
Scan the second provided code to complete the pairing process.
Insert the USB receiver into your computer’s USB port. A single beep confirms successful pairing.

Sleep Time Settings:
Adjust the sleep time settings based on your preference for device standby duration.

Endpoint Settings:
Configure the endpoint settings according to your desired output format.
Barcode Transfer Modes:
Select between Real Mode for immediate data transfer and Storage Mode for saving scanned codes for later retrieval.
Prefix and Suffix Settings:
Customize prefix and suffix settings to enhance data organization and readability.
Virtual COM Mode for Radio Communication:
Utilize Virtual COM mode for wireless communication by following the provided instructions.

FAQ:

Q: How do I reset the device to factory settings?
A: Navigate to the ‘Restore to Settings Factory’ option in the menu and follow the on-screen instructions to reset.
Q: How can I check the battery level of the device?
A: Access the ‘Battery Level’ feature in the menu to view the current battery status.
Q: What is the difference between Real Mode and Storage Mode in Barcode Transfer?
A: Real Mode sends scanned codes directly to a connected computer, while StUser Manual orage Mode saves codes internally for later transfer.

User Manual

Code reader
HD6700

Warranty: 2 years
Light Source: 650 Laser
Processor: ARM Cortex 32-bit
Scan Acknowledgement: Light and Sound Signal
Scan speed: 500 scans/second
Wireless Communication: 2.4 G
Wireless range: up to 100 meters in open spaces
Built-in Memory: 16Mb
Memory capacity: up to 50,000 codes
Battery Capacity: 1800mA
Operating Current: 1A
Charging Voltage: 5V
Operating time: up to 24 hours with 1D codes and up to 16 hours with 2D codes
Charging Time: 4 hours
Standby Time: 30 days
Interface: USB
Drop resistance: up to 1.5 meters
Device dimensions: 16 x 9.5 x 6.5 cm
Package dimensions: 17 x 11.5 x 7.5 cm
Device weight: 200 g
Package weight: 290 g
Operating Temperature: 0 to 40 degrees
Storage Temperature: -40 to 60 degrees
Moisture: 5% to 95%
Readable 1D codes: Codabar, Code 11, Code 93, MSI, Code 128, UCC/ EAN-128, Code 39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 2 of 5, Interleaved 2 of 5 (ITF), Standard 2 of 5, Matrix 2 of 5
Readable 2D codes: QR, DataMatrix, PDF 417, Aztec, Xanxin, MicroPDF

Kit contents

Case settings

To pair the reader with a USB receiver for radio communication, first scan the code below.
In the next step, you need to scan the code below.
Finally, plug the receiver into your computer’s USB port. A single beep indicates that the reader is correctly paired with the receiver.

Beep settings

Sleep time settings

Endpoint settings

2.4G mode baud rate settings

Real mode
Codes are sent directly to your computer immediately after scanning.
Storage mode
Scanned codes are saved in the built-in memory of the device, which can be later transferred to a computer.