HARMAN GO + PLAY 3 Bluetooth Speaker
Product Usage Instructions
- Bluetooth Pairing
- Go to Settings on your device and select Bluetooth.
- Select “HK Go + Play 3” from the list of available devices to pair.
- Once connected, you will see “Connected” on your device.
- Music Streaming
To reboot the device, press and hold the power button for more than 10 seconds. - Multi-Point Connection
You can connect a maximum of 2 devices simultaneously. - Stereo Boost Pairing
- Press and hold the pairing button for more than 5 seconds.
- Pair the left channel (L) by pressing x5, then pair the right channel (R) by pressing x1.
- Stereo Boost Control
To swap between left and right channels, press x2. To unpair, press x1 for more than 5 seconds. - Conferencing
- If there is an incoming call, the music playback will pause.
- Answer the call to talk through the microphone.
- Music Playback Through an Audio Cable
- To play music using an audio cable, disconnect the Bluetooth connection first.
- Connect one end of the audio cable to your device and the other end to the speaker.
- Charging
If the speaker will not be used for an extended period, recharge the battery at least once every 3 months.
Frequently Asked Questions
What should I do if the speaker has a low battery?
If the speaker has a low battery, connect it to a power source using the provided power cord for charging.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging.
How many devices can be connected simultaneously via Bluetooth?
You can connect a maximum of 2 devices at the same time via Bluetooth.
WHAT’S IN THE BOX
Power cord quantity and plug type vary by region.
BLUETOOTH PAIRING
MUSIC STREAMING
To reboot, hold
for more than 10 seconds.
MULTI-POINT CONNECTION
Maximum 2 devices.
STEREO BOOST PAIRING
STEREO BOOST CONTROL
CONFERENCING
- When there is an incoming call, music playback pauses.
- Pick up the phone call and talk through the microphone.
MUSIC PLAYBACK THROUGH AN AUDIO CABLE
To play music through the audio cable, disconnect Bluetooth.
CHARGING
If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
TECH SPECIFICATION
- Bluetooth version: 5.2
- Support: A2DP V1.3, AVRCP V1.6
- Transducers: 70 mm x 2 pcs (Mid range), 20 mm x 2 pcs (Tweeter), 130 mm x 1 pc (Subwoofer)
- Output power: 160 W RMS
- Frequency response: 43 Hz – 20 kHz (-6 dB)
- Signal-to-noise ratio: 80 dB A-weighted
- Battery type: 25.92Wh rechargeable battery
- Battery charge time: 3 hours
- Music play time: up to 8 hours (dependent on volume level and audio content)
- Power supply: 100 – 240 V ~ 50/60 Hz
- Bluetooth transmitter power: ≤10 dBm
- Bluetooth transmitter frequency range: 2.400 – 2.4835 GHz
- Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
- USB specification: Audio playback is for the US version only.
- For other versions, USB is for Service only.
- USB port: Type C
- USB rating: 5V/2A (maximum)
- Supporting file formats: mp3
- Dimension (W x H x D): 439 x 240 x 192 mm / 17.3″ x 9.5″ x 7.6″
- Weight: 4.7 kg (10.4 lbs)
During self-tuning, environmental sound will be recorded. Press and
together for 5 seconds, then press to play the recorded audio (for the US version only)
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Documents / Resources
 | HARMAN GO + PLAY 3 Bluetooth Speaker [pdf] User Guide GO PLAY 3 Bluetooth Speaker, GO PLAY 3, Bluetooth Speaker, Speaker |