Goodman GLXT7C High Efficiency Split System Air Conditioner
OWNER’S MANUAL
Up to 17.2 SEER2 2 To 5 Tons
Standard Features
- Two-Stage Copeland Ultra-Tech scroll compressor
- Quiet two-speed ECM outdoor fan motor
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via Bluetooth indoor board via CoolCloud™ App
- Copeland® ComfortAlert™ built in diagnostics
- Copper tube/enhanced aluminum fin coil – 5mm on 2.0-3.0T
- Color-coded terminal strip for non-communicating set-up
- Only two low-voltage wires required in communication mode
- Factory-installed filter drier
- Factory-installed transformer
- Factory-installed high and low-pressure switches
- High-density foam compressor sound blanket
- Fully charged for 15’ of tubing length
- Ambient temperature sensors
- Ground lug connection
- AHRI Certified – ETL Listed
Cabinet Features
- Removable grille-style top design compliant with UL 60335-2-40
- Venturi for increased velocity of airflow
- Heavy-gauge galvanized steel cabinet
- Baked-on powder-paint finish with 500-hour salt-spray approval
- Steel louver coil guard with rust-resistant screws.
- Top and side maintenance access
- Single-panel access to controls with space for field-installed accessories
- Service valves with sweat connections and easy-access gauge ports
- When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifetime Compressor Limited Warranty (good for as long as you own your home), 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration and some of the additional requirements are not required in Florida, California, or Québec. The duration of warranty coverage in Texas and Florida differs in some cases. Other limitations and exclusions apply; refer to complete warranty details for a full list of limitations and exclusions.
Nomenclature
Product Specifications
¹. Line sizes denoted for 25’ line sets, tested and rated in accordance with ARI Standard 210/240. For other line set lengths or sizes, refer to the Installation Instructions and/or the Long Line Set Applications guide.
². Any suction line adapter will need to be supplied by the field.
³. Unit is factory charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per the Final Charge Adjustment procedure found in the Installation Instructions.
4. Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
5. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
Notes
Always check the S&R plate for electrical data on the unit being installed.
Expanded Cooling Data — GLXT7CA2410**/CA*TA2422*3A*+EEP – HIGH STAGE
Expanded Cooling Data — GLXT7CA2410**/CA*TA2422*3A*+EEP – LOW STAGE
Performance Data – Low Stage
Wiring Diagram
Dimensions
Accessories
Contains 20 brackets; four brackets needed to anchor unit to pad
1. Installed on indoor coil
2. Condensing units and heat pumps with reciprocating or rotary compressors require the use of start-assist components when used in conjunction with an indoor coil using a non-bleed thermal expansion valve refrigerant metering device or liquid solenoid kit.
The TXV should always be sized based on the tonnage of the outdoor unit.
All AHRI system ratings are accessible in the System Configurator tool via PartnerLink
Product Specifications
- Cooling Capacity: 24,000 – 60,000 BTU/h
- SEER: Up to 17.2
- Compressor Type: Two-Stage
- Refrigerant: R-32
- Electrical Data: 208/230 V, 1 Phase, 60 Hz
- Weight: 180 – 283 lbs
Our continuing commitment to quality products may mean a change in specifications without notice.
©2024 • Houston, Texas • Printed in the USA.
SS-GLXT7C-R32
FAQ
Q: What should I do if my unit is not cooling effectively?
A: Check and replace the air filters if dirty, ensure there are no obstructions blocking airflow, and verify that all settings are correct.
Q: Can I install this unit myself?
A: It is recommended to have a professional HVAC technician install the unit to ensure proper setup and functionality.
Documents / Resources
 | Goodman GLXT7C High Efficiency Split System Air Conditioner [pdf] Owner's Manual GLXT7CA2410, GLXT7CA3610, GLXT7CA4810, GLXT7CA6010, GLXT7C High Efficiency Split System Air Conditioner, GLXT7C, High Efficiency Split System Air Conditioner, Split System Air Conditioner, System Air Conditioner, Air Conditioner |
