USER MANUAL
SMART WATCH
C20Pro Instructions
Watch Client Download
Scan the QR code below to download and install it to the watch client.
http://plus.crrepa.com/app-download/dafit
 |  |  |  |
| Sliding Direction | Jiugongge Menu Style | Horizontal Line Menu Style | Honeycomb Menu Style |
Full Touch
Slide down to enter the control center, slide up to view messages, slide left to enter the main function interface, slide right to enter the shortcut center.
Button
POWER key
Short press: turn on/off/return to the dial interface.
Long press: on/off.
SPORT key
Press short: light up the screen/enter the main menu/return to the previous interface.
Press: enter sports mode.
Watch Charging And Activation
It can be activated by charging before using the watch for the first time.
The magnetic charger used is attached to the metal contact on the back of the watch, and the other end of the charging cable can be connected to the 5V1A USB charging head or a computer USB port.
Connect The Watch
Enter the watch-settings-aboue, check the MAC address of the bracelet, and you can determine your device by the MAC address in the device list.
After the watch is successfully bound, every time you open the client in the future, the watch will be automatically connected to the phone, and the data can be synchronized by pulling down the data page in the client.
Dial Settings
Press and hold the dial interface for 1.5 seconds to switch the dials of different styles in the watch.
After successful Bluetooth connection, you can enter APP–dial selection–custom dials.
After successful Bluetooth connection, you can go to APP–dial selection–more dials.
Daily Data
You can record the total number of steps for the day and the number of steps, calories, exercise time and other data for each period of the day.
More detailed data can be viewed in the mobile APP.
Sleep Monitoring
It can record and display the total duration of sleep as well as the duration of deep sleep and light sleep.
More detailed information analysis data records can be viewed on the mobile APP.
Heart Rate Monitoring
Before monitoring the heart rate, make sure the watch is crrectly worn on the wrist (the best position is one finger wide above the wrist bone), heart rate detection requires wearing a tight fit to avoid light leakage for effective detection, and then enter the heart rate detection, which requires the wrist to remain stationary during the detection process and displays the dynamic heart rate value after a few seconds. Enter the heart rate icon interface to measure the current heart rate value. Display the current count value of the heart rate interface and the heart rate status of each time of the day.
More detailed analysis and data records can be viewed on the APP.
Take Exercise
Click “Exercise” to enter the sports interface, supporting walking , running, cycling, skipping, badminton, basketball, football, swimming, climbing, tennis, rugby, golf, yoga, fitness, dancing, baseball, elliptical, indoor cycling, free training, rowing machine, etc. A total of 123 sports modes are supported, starting sports will display time, steps, heart rate, distance and other data. You can also set the exercise goal before the exercise starts.
More detailed analysis and data records can be viewed on the mobile APP.
Blood Pressure
Before blood pressure monitoring, first confirm that the watch is correctly worn on the wrist (the best position is one finger width above the wrist bone), blood pressure detection requires wearing a tight bias to avoid leakage of light can not be effectively detected, and then enter the blood pressure detection, the detection process requires the wrist to remain stationary, waiting for the display of blood pressure values.
Enter the blood pressure icon interface to measure the current blood pressure value with the last seven measurements.
More detailed information analysis as well as data records can be viewed in the APP.
Blood Oxygen
Before blood oxygen monitoring, confirm that the watch is correctly worn on the wrist (the best position is one finger width above the wrist bone), blood oxygen detection requires wearing tight to avoid leakage of light can not be effectively detected, then enter the blood oxygen detection, the detection process requires the wrist to remain stationary, waiting for the display of blood oxygen values.
Enter the blood oxygen icon interface to measure the current blood oxygen value.
Display the current value and the last seven measurements in the blood oxygen interface.
More detailed analysis and data records can be viewed in the APP.
Weather
The weather interface will display the current weather temperature and slide up to display the weather information of the next six days.
The weather information needs to be connected to the APP to get data. If the connection is opened for a long time, the weather information will not be updated.
Camera
After connecting the mobile APP, the watch can control the mobile phone camera to take pictures.
After opening the camera on the phone, long press on the watch camera control page to trigger the phone camera shutter.
Music Control
After connecting the mobile APP, the watch can control the music player of the mobile phone.
When the phone is playing music, you can use the watch to control the phone to play/pause, previous song, next song and adjust the volume.
Alarm Clock
You can set the alarm of the watch on the APP and on the watch, and you can set up to 8 alarms.
When the set time arrives, the watch will display the alarm icon and vibrate.
Message Push
The watch can receive and display the notification and incoming call reminders on the mobile phone, and can refuse the call.
The push option switch is set in the APP.
The watch message page can store the last 5 message records.
Other Functions
Other functions of the watch include: Breathing exercise, pressure detection, stopwatch, alarm clock, timer, don’t disturb mode, power-saving mode, brightness, vibration, factory settings, restart, shutdown, APP download QR code, etc.
Sedentary Reminder
Turn on the sedentary reminder after connecting the APP.
The watch will prompt you to get up and walk after 1 hour of sedentary.
Relax
You can choose the mode of “Stressed” and “Falling Asleep”, and follow the UI animation to adjust your breathing rate to achieve the effect of relief and sleep aid.
Frequently Asked Questions And Answers
Why can't you wear a watch to take a hot bath? When bathing, the temperature is relatively high, which will produce a lot of water vapor, which can damage your watch. Why can't the smart watch receive the message push? Android phone settings: 1.Make sure the switch of message pushing is turned on in the cell phone APP. 2.Make sure the message can be displayed normally on the notification bar of your phone, the watch message is pushed by getting the phone notification bar message, if there is no message on the phone notification bar, the watch will not receive the push. (You need to find the notification settings in the phone settings and turn on the notification switch of Facebook, Twitter, phone, SMS and other mobile clients).
Apple mobile phone set
- Confirm that the message push switch is turned on in the cell phone client.
- Confirm that the phone messages can be displayed normally in the notification bar.
(You need to find the notification settings in the phone settings and turn on the notification switch of Facebook, Twitter, phone, SMS and other cell phone clients).
If you do not know how to use this smartwatch, you can find in Da Fit:
“Me” – “Background Run Protection Guide”, follow the steps inside, it will help you solve many problems, if you still do not know how to use it, you can contact our customer service through Amazon, thank you!
Documents / Resources
 | Fenpos C20Pro Smart Watch [pdf] User Manual C20Pro Smart Watch, C20Pro, Smart Watch, Watch |
