ESX RC-SXE Controller for Signum DSP Modelle
Functions
- Controlling audio streaming playback
- Preset selection
- Input source selection
- Source selection for the automatic crossfading
- Control of the main volume
- Subwoofer level control
Scope of delivery
- 1 x DSP Remote Controller
- 1 x Die-Cast installation housing
- 4 x Mounting screws
- 1 x Adhesive pad
- 1 x 5m extension cable
Specifications
- Bluetooth Version 5.0
- Frequency range 2.400 – 2.484 MHz Max. emitted power 30,0 dBm
CAUTION: The DSP control via RC-SXE controller and PC software or via smartphone app does not work at the same time. Use only one of the three control options.
- In the main menu, the main volume can be adjusted using the rotary knob. Controller range = – 40 to 6.
NOTE: After about 5 seconds of inactivity, the display always switches back to the main menu. - In the main menu, briefly press the rotary knob 1 x to display the SUB menu. The subwoofer level can then be adjusted using the rotary knob. Controller range = – 40 to 6.
- In the main menu, briefly press the rotary knob 4 x to display the MEMO-RY menu. The desired preset can then be selected using the rotary knob and confirmed by pressing the rotary knob.
- In the main menu, briefly press the rotary knob 2 x to display the SOURCE menu. The desired input source can then be selected using the rotary knob and confirmed by pressing the rotary knob.
- In the main menu, briefly press the rotary knob 3 x to display the MIX SOURCE menu. The source for the automatic crossfade can then be selected using the rotary knob and confirmed by pressing the rotary knob.
- The playback of the audio streaming can be controlled using the three hard-ware buttons next to the display.
DECLARATION OF CONFORMITY
Audio Design GmbH hereby declares that ESX RC-SXE complies with Directive 2014/53/EU. The full declaration of conformity can be viewed at www.esxaudio.de/ce
FAQs
- Q: Can I control DSP via both RC-SXE controller and PC software or smartphone app simultaneously?
A: No, DSP control does not work simultaneously via RC-SXE controller and PC software or smartphone app. Use only one of the three control options. - Q: How does the display behave inactivity?
A: After about 5 seconds of inactivity, the display will switch back to the main menu automatically. - Q: Where can I find the Declaration of Conformity for ESX RC-SXE?
A: The full Declaration of Conformity can be viewed at www.esxaudio.de/ce
Documents / Resources
 | ESX RC-SXE Controller for Signum DSP Modelle [pdf] Instruction Manual RC-SXE Controller for Signum DSP Modelle, RC-SXE, Controller for Signum DSP Modelle, Signum DSP Modelle, DSP Modelle |