ELECROW-LOGO

ELECROW ESP32 HMI Display Touch Screen LCD

ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-PRODUCT

Thank you for purchasing our product. Please read this user manual carefully before use and keep it properly for future reference.

Screen Buttons and Interfaces

Screen appearance varies by model, and diagrams are for reference only. Interfaces and buttons are silk screen labeled, use the actual product as a reference.

Inch HMI Display

Package List

ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-1

The following list diagram is for reference only. Please refer to the actual product inside the package for details.

IMPORTANT SAFETY WARNING!

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be done by children without supervision.
  • WARNING: Use the detachable supply unit provided with this appliance only.

lnformationon the disposal for Waste Electrical & Electronic Equipment{WEEE). This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery, and recycling, please take these products to designated collection points where they will be accepted on a free-of-charge basis. In some countries, you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE.

Screen Buttons and Interfaces

2.4 Inch HMI Display
ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-2

2.8 Inch HMI Display
ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-3

3.5 Inch HMI Display
ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-4

4.3 Inch HMI Display
ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-5

5.0 Inch HMI Display

ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-6

7.0 Inch HMI Display

ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-7

Parameters

Size2.4″2.8″3.s··
Resolution240*320240*320320*480
Touch TypeResistive TouchResistive TouchResistive Touch
Main ProcessorESP32-WROOM-32-N4ESP32-WROOM-32-N4ESP32-WROOM-32-N4
Frequency 

240 MHz

 

240 MHz

 

240 MHz

Flash 

4MB

 

4MB

 

4MB

SRAM 

520KB

 

520KB

 

520KB

ROM448KB 

448KB

448KB
PSRAMIII
Display

Driver

ILl9341VILl9341VILl9488
Screen TypeTFTTFTTFT
Interface1*UARTO, 1*UARTl,

1*I2C, 1*GPIO, 1*Battery

1*UARTO, 1*UARTl,

1*I2C, l*GPIO, l*Battery

1*UARTO, 1*UARTl,

1*I2C, l*GPIO, l*Battery

Speaker JackYESYESYES
TF Card SlotYESYESYES
Active Area36.72*48.96mm(W*H)43.2*57.6mm(W*H)48.96*73.44mm(W*H)
Size 5.0″7.0″
Resolution480*272800*480800*480
Touch TypeResistive TouchCapacitive TouchCapacitive Touch
Main ProcessorESP32-S3-WROOM-1- N4R2ESP32-S3-WROOM-1- N4R8ESP32-S3-WROOM-1- N4R8
Frequency 

240 MHz

 

240 MHz

 

240 MHz

Flash 

4MB

 

4MB

 

4MB

SRAM 

512KB

 

512KB

 

512KB

ROM 

384KB

 

384KB

 

384KB

PSRAM2MB8MB8MB
Display

Driver

NV3047ILl6122 + ILl5960EK9716BD3 + EK73002ACGB
Screen Type 

TFT

 

TFT

 

TFT

Interface1*UARTO, 1*UARTl,

1*GPIO, 1*Battery

2*UARTO, l*GPIO,

l*Battery

2*UARTO, 1*GPIO,

l*Battery

Speaker JackYESYESYES
TF Card SlotYESYESYES
Active Area95.04*53.86mm(W*H)108*64.8mm(W*H)153.84*85.63mm(W*H)

Expansion Resources

ELECROW-ESP32-HMI-Display-Touch-Screen-LCD-FIG-8

  • Schematic Diagram
  • Source Code
  • ESP32- S3-WROOM-1 N4R8 Datasheet
  • Arduino Libraries
  • 16 learning Lessons for LVGL
  • LVGL Reference

Safety Instructions

  • To ensure safe use and avoid injury or property damage to yourself and others, please follow the safety instructions below.
  • Avoid exposing the screen to sunlight or strong light sources to prevent affecting its viewing effect and lifespan.
  • Avoid pressing or shaking the screen hard during use to prevent the loosening of internal connections and components.
  • For screen malfunctions, such as flickering, color distortion, or unclear display, stop use and seek professional repair.
  • Before repairing or replacing any equipment components, make sure to turn off the power and disconnect from the device.

Contact Technical Support
E-mail: techsupport@elecrow.com

Documents / Resources

ELECROW ESP32 HMI Display Touch Screen LCD [pdf] User Manual
ESP32 HMI Display Touch Screen LCD, ESP32, HMI Display Touch Screen LCD, Display Touch Screen LCD, Touch Screen LCD, LCD

References

Leave a comment

Your email address will not be published. Required fields are marked *