heliX+
User Manual
10X BUFFER HE140 PH 7.4
running buffer
Dynamic Biosensors GmbH & Inc.
BU-HE-140-10 v2.1
Product Description
Order Number: BU-HE-140-10
Table 1. Contents and Storage Information
| Material | Composition | Amount | Storage |
| 10x Buffer HE140 pH 7.4 | 100 mM HEPES, 1.4 M NaCl, 500 µM EDTA, 500 µM EGTA and 0.5 % Tween20; 0.2 µm sterile filtered | 50 mL | 2-8°C |
For research use only.
This product has a limited shelf life, please see expiry date on label.
Preparation
Dilute the complete solution 10x Buffer HE140 pH 7.4 (50 mL) by mixing with 450 mL ultrapure water.
After dilution HE140 Buffer is ready for use (10 mM HEPES, 140 mM NaCl, 50 µM EDTA, 50 µM EGTA and 0.05 % Tween20).
The diluted buffer should be stored at 2-8°C.
Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich
Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801
USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
BU-HE-140-10 v2.1
www.dynamic-biosensors.com
Documents / Resources
 |
dynamic BIOSENSORS 10X BUFFER HE140 PH 7.4 Running Buffer [pdf] User Manual BU-HE-140-10, 10X BUFFER HE140 PH 7.4 Running Buffer, 10X BUFFER HE140 PH 7.4, Running Buffer, Buffer |