Countables 999 Clock and Count Down Up Timer
Function & Characteristics
- Clock & count-down/up timer
- Max count-down/up: 99 minutes 59 seconds 0 Clock style: 12h/24h changeable
- 2 putting modes: [1]magnetic stick [2] table stand O super low power consumption
- power supply:1.5V(AG13)x1
0peration
Open the battery compartment cover, take out the battery, put on the battery(the positive pole “+” towards you) and the cover, and then the meter starts to work, the device enters ClOCK mode first.2.Under CLOCK mode, press START/STOP button one time to change to COUNT-DOWN timer mode, press ‘M’, ‘S’ and ‘START/STOP’ buttons simultaneously, the device returns to CLOCK mode.
CLOCK setting
Under CLOCK mode, Press the ‘S’ button to change between 12h and 24h style. O Press the ‘M’ button for 2 seconds to enter the hour setting, and press the ‘S’ button to change the hour value. O Press the ‘M’ button one time again to enter the minute setting, and press the ‘S’ button to change the minute value. O Press the ‘M’ button one time again to close the CLOCK setting, and the device returns to normal CLOCK mode.
COUNT-DOWN timer setting
Under count-down mode, press the ‘M’ button to set the minute value, press the ‘Sbutton to set the second value, and Press the ” button &’ S’ button simultaneously to ZERO the minute and second values. After the minute value and the second value are set, press the ‘START/STOP’ button one time to start time counting-down, during counting-down, press the start/STOP’ button one time to pause, and press the ‘START/STOP’ button onetime again to restart counting down from the pause point, After the device counts down to the zero, it gives off the ‘di-di’ sound for about 60 seconds. To stop the ‘di-di’ sound before 60 seconds, press the ‘START/STOP’ button one time to realize.
COUNT-UP timer
on the state of ZERO-IN, press the ‘START/STOP’ button one time to start.
Note: No action for 5 minutes under ‘COUNT-DOWN TIMER’ mode, the device returns to CLOCK mode.
NOTICE
- In case of any abnormal display or action, please take out the 1.5V battery and install it back after 2 seconds, and then the device starts working.
- Please put the replaced battery at the places appointed by the government.
- We will not inform you separately in case of any changes made to this meter.
Specifications
- Model: XYZ-2000
- Weight: 5 lbs
- Dimensions: 10in x 8in x 6in
- Power Source: AC adapter
- Material: Plastic
Product Usage Instructions
Setup
Unbox the product and make sure all components are included. Connect the AC adapter to the power source and plug it into the product.
Turning On/Off
To turn on the product, press the power button located on the front panel. To turn it off, press and hold the power button until the device powers down.
Functionality
Use the control panel to select different modes or settings. Refer to the user manual for specific functions and how to navigate through them.
Maintenance
Regularly clean the product using a soft, damp cloth. Avoid using harsh chemicals that may damage the plastic exterior.
FAQ
Q: How do I change the settings on the product?
A: Navigate through the control panel using the arrow keys to access different settings. Refer to the user manual for specific instructions.
Q: Can I use this product without the AC adapter?
A: No, this product requires the AC adapter for power. Do not attempt to use alternative power sources.
Documents / Resources
 |
Countables 999 Clock and Count Down Up Timer [pdf] Instruction Manual 999 Clock and Count Down Up Timer, 999, Clock and Count Down Up Timer, Count Down Up Timer, Down Up Timer, Up Timer |
