BOSE 802 Series V Installed Sound Reinforcement Loudspeaker Owner’s Manual

Product Overview

One of the best-selling sound reinforcement loudspeakers of all time returns. The Bose Professional 802 Series V features eight 4.5-inch full-range drivers that deliver smooth frequency response, wide dispersion, and exceptional power handling and efficiency. The proprietary array design ensures a wide 120° × 100° coverage pattern, reducing the need for multiple loudspeakers, while the 52 Hz low-frequency range can eliminate the need for subwoofers. The rugged, lightweight enclosure is IP55 weather-rated for durability in indoor and outdoor installations, and flexible mounting options allow for easy, secure installations in various configurations.
Available in black, 802 Series V is compatible with the 802 U-Bracket and WBP-8 wall-mount adapter.

Key Features

Eight 4.5-inch full-range drivers deliver smooth frequency response, wide dispersion, and exceptional power handling and efficiency
Proprietary array design ensures a wide 120° × 100° coverage pattern, reducing the need for multiple loudspeakers
52 Hz – 15 kHz frequency range provides full-range audio without the need for subwoofers at moderate sound levels
High 123 dB peak SPL capacity means powerful sound reinforcement in demanding environments
Rugged, lightweight enclosure is IP55 weather-rated for durability in indoor and outdoor installations
Flexible mounting options including threaded inserts for easy, secure installations in various configurations

Applications

Hospitality
Retail / restaurants
Corporate
Houses of worship
Performing arts
Education

TECHNICAL DATA

802 Series V 

Technical Specifications

SINGLE-LOUDSPEAKER PERFORMANCE
Frequency Range (-10 dB) 152 Hz – 15,000 Hz
Nominal Coverage Pattern120° horizontal × 100° vertical
AES Transducer Test 4Bose ProfessionalExtended-Lifecycle Test 5
Power Handling, Long-term Continuous300 W240 W
Power Handling, Peak1200 W960 W
Sensitivity (SPL / 1 W @ 1 m) 292 dB92 dB
Calculated Maximum SPL @ 1 m, Continuous 3117 dB116 dB
Calculated Maximum SPL @ 1 m, Peak123 dB122 dB
Loudspeaker EQActive EQ required for optimal performance
Recommended High-pass Protection55 Hz with minimum 12-dB/octave filter
Overload ProtectionPower-limiting circuit, non-fused, automatic reset
TRANSDUCERS
Drivers8 × Bose Professional 4.5-in (114 mm) full-range cone transducers
Nominal Impedance8 Ω
PHYSICAL
Enclosure MaterialMineral-reinforced HDPE
GrillePowder-coated steel
EnvironmentalOutdoors or indoors, IP55 per IEC 60529:2013+COR.1:2019
Connectors(2) Neutrik® NL4 wired parallel
Suspension / Mounting(8) M8 threaded inserts (2 back, 2 bottom, 4 sides)
Product Dimensions (length × width × depth)334 mm × 523 mm × 318 mm (13.1 in × 20.5 in × 12.5 in)
Net Weight16.7 kg (36.8 lb)
Shipping Weight19.3 kg (42.5 lb)
Package Contents(1) 802 Series V, (1) installation guide
Accessories802 U-bracket, WBP-8 bi-pivot bracket
PRODUCT CODES
802 Series V, black893554-0100 802 SERIES V OUTDOOR INSTLD LDSPK BLK
802 U-bracket746686-0110 802 U-BRACKET BLK
WBP-8 bi-pivot bracket893802-0100 WBP-8 PAN & TILT WALL BRACKET,BLK

Footnotes

  1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
  2. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
  3. Maximum SPL calculated from sensitivity and power handling specifications exclusive of power compression.
  4. AES component test: pink noise, IEC 268-5 filtered, 6-dB crest factor, 2-hour duration with recommended EQ.
  5. Bose extended-lifecycle test: pink noise, IEC 268-5 filtered, 6-dB crest factor, 100-hour duration with recommended EQ.
    On-axis Response

    Impedance

    Beamwidth

    Dimensions

    • Side View 7

    • Front View
    • Rear View

    • Bottom View
    • Top View
  6. Dimensions are shown in millimeters over inches.
  7. Dimensions apply to both left and right sides.

© 2024 Transom Post OpCo LLC. All rights reserved. 802 is a trademark of Transom Post OpCo LLC. Bose is a trademark of Bose Corporation. Neutrik is a registered trademark of Neutrik AG. All other trademarks are the property of their respective owners.

For additional specifications and application information, visit : BoseProfessional.com. Specifications are subject to change. 12/2024

BoseProfessional.com

Documents / Resources

BOSE 802 Series V Installed Sound Reinforcement Loudspeaker [pdf] Owner's Manual
893554-0100, 746686-0110, 893802-0100, 802 Series V Installed Sound Reinforcement Loudspeaker, 802 Series V, Installed Sound Reinforcement Loudspeaker, Sound Reinforcement Loudspeaker, Reinforcement Loudspeaker, Loudspeaker

References

Leave a comment

Your email address will not be published. Required fields are marked *