AKKO 5108B Multi Nodes Keyboard

Technical  Specification

Hot Keys

The key combinations below are applicable to Windows system. The combination might change with respect to different Windows systems or along with system updates. Please follow Akko website for the latest hotkeys.

System Commands (Mac)

Black light Setting

8luetooth  Feature Overview

5108B Bluetooth Setup Instruction 1

Switch to Bluetooth mode

When the keyboard remains unplugged, users can push the: correspondingly. Then long press and hold Fn+ E/R/T to start pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing vetch on the back to the left/right to enter Windows/Mar mode mode when the blue LEDS under E/ R/T keys flash quickly. When the Keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically without having to push the switch on the back. Users can directly long press and hold Fn+ E/R/Tto enable Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDS under E/ R/T keys flash quickly.

Set the Bluetooth profile

To help user recognize individual Bluetooth device, the keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. The device name under the Bluetooth 5.0 framework is Akko 5108 BT-1/Akko 5108 BT-2/ Akko 5108 BT-3 while the device name under Bluetooth 3.0 is AKKO 5108s BT3.0. Once the devices are paired through Fn E/R/T, the system will by default memorize the last connected device before you tum off the Bluetooth mode

5108B Bluetooth Setup Instruction 2

.Bluetooth Pairing

The keyboard can be paired with PC, Pad, smartphone and other devices with Bluetooth turned on. When you first try to search Bluetooth devices, two groups of device names shall appear with Akko 5108 BT3.0 (Bluetooth 3.0) and Akko 5108-1 (Bluetooth 5.0). Select a Bluetooth group based on your preferences (Note: some devices can only search for the Bluetooth 5.0 group).

Switch the Bluetooth device

After 4 Bluetooth devices have been paired with the keyboard, press Fn+E/ Fn+R/Fn+T/ Fn+Y for at least 3 seconds to quickly switch between them

Shut off the keyboard

Turn the power off on the keyboard back panel while unused for power saving: f the keyboard remains unused for over 10 mins, R would go to sleep mode and you can activate it by pressing any key.
Note: The battery saver mode for Windows system would affect/delay the sleep activation time of the keyboard.

Reset the keyboard

If you forgot the speciate paired front-end device or if there remains disorder in Bluetooth connection and communication, you ill need to clear the computer’s Bluetooth cache by removing the 5108 keyboard from the list of connected device.

Key/Lighting Effects Customization Instruction

1. .The key/lighting effects customization must be completed in wired mode with Akko driver. niece music rhythm effects with Akko driver.
2. In wired mode, the lighting effects can also a
3. Please download the Akko Cloud driver on our website.
4. Users can download the driver via en.akkogear.com

Akko Warranty and service Statement

1. Akko provides 1-yr warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during selfrepair.
3. Dissembling the keyboard without manufacturer/seller’s instruction will immediately void the warranty
4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Precaution Man-made damage is not united to immersion, falling o, and pulling or the wires wires excessive forces, etc.-

Documents / Resources

AKKO 5108B Multi Nodes Keyboard [pdf] User Manual 5108B, Multi Nodes Keyboard, 5108B Multi Nodes Keyboard, Keyboard, Cinnamoroll 20th Anniversary 5108

References

• User Manual