AKKO 5075 B Plus Multi-Host Mechanical Keyboard

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or telev ision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help.

Technical Specifications

HotKeys

System Commands (Windows)

Lock Windows Key Press Fn and left Win key
Restore Factory Settings Hold down Fn and press~ key for 5S
Revert Ctrl into Menu (APP) key Hold down Fn and press right Ctrl for 3S

System Commands(Mac)

• F1 Decrease display brightness
• F2  Increases display brightness
• F3 Open mission control
• F4  Activate Siri
• F7  Skip back (Audio)
• F8 Pause/Play (Audio)
• F9 Skip forward (audio)
• F10 Mute
• F11 Volume down
• F12 Volume up
• Left Win Option
• Left Alt Command
• Right Alt Command

Backlight Settings

Bluetooth Feature Overview

Bluetooth Setup Instruction

1. Switch to Bluetooth mode
   CD When the keyboard remains unplugged, users can push the switch on the back to the left/right to enter Windows/Mac mode correspondingly. Then long press and hold Fn + E / R / T to start pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E/ R/T keys flash quickly.
   @When the Keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically without having to push the switch on the back. Users can directly long press and hold Fn + E / R / T to enable Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash quickly.
2. Set the Bluetooth profile
   To help user recognize individual Bluetooth device, the keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. The device name under the Bluetooth 5.0 framework is 5075BP-1 / 5075BP-2 / 5075BP-3 while the device name under Bluetooth 3.0 is Akko 5075BP BT3.0. Once the devices are paired through Fn + E/R/T, the system will by default memorize the last connected device before you turn off the Bluetooth mode.
3. Bluetooth Pairing
   The keyboard can be paired with PC, Pad, smartphone and other devices with Bluetooth turned on. When you first try to search Bluetooth devices, two groups of device names shall appear with Akko 5075BP BT3.0 (Bluetooth 3.0) and 5075BP-1 (Bluetooth 5.0). Select a Blue­tooth group based on your preferences (Note: some devices can only search for the Bluetooth 5.0 group).
4. Switch the Bluetooth device
   After 4 Bluetooth devices have been paired with the keyboard, press Fn+E/ Fn+R/ Fn+ T / Fn+Yfor at least 3 seconds to quickly switch between them.
5. Shut off the keyboard
   Turn the power off on the keyboard back panel while unused for power saving;
   If the keyboard remains unused for over 1 0 mins, it would go to sleep mode and you can activate it by pressing any key.
   Note: The battery saver mode for Windows system would affect/delay the sleep activation time of the keyboard.
6. Reset the keyboard
   If you forgot the specific paired front-end device or if there remains disorder in Bluetooth connection and communication, you’ll need to clear the computer’s Bluetooth cache by removing the 5075 keyboard from the list of connected device.

Key/Lighting Effects Customization Instruction

1. The keyboard supports key/RGB backlit mapping in either 2.4G or wired mode.
2. The keyboard supports audio visualizer in either 2.4G or wired mode.
3. Please download the Akko Cloud driver on our website.
4. Users can download the driver via en.akkogear.com

Akko Warranty and Service Statement

1. Akko provides 1-yr warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happenedduring self-repair.
3. Dissembling the keyboard without manufacturer/seller’s instruction will immediately void the warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distribu­tor at the time of purchase.

precaution Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

www.akkogear.com

Documents / Resources

AKKO 5075 B Plus Multi-Host Mechanical Keyboard [pdf] User Manual 5075B, 2A4K8-5075B, 2A4K85075B, 5075 B Plus Multi-Host Mechanical Keyboard, 5075 B Plus, Multi-Host Mechanical Keyboard, Mechanical Keyboard, Keyboard

References

• User Manual