Aihome EVPAD Media Player
Product packaging content
| Numbering | Part Name | Quantity |
| 1 | Media Player | 1 |
| 2 | Bluetooth Remote Control | 1 |
| 3 | User Manual | 1 |
| 4 | HD Cable | Optional |
| 5 | AC Adapter | 1 |
| 6 | DC Cable | 1 |
- The HD cable is optional; please ask the agent if you have any problems.
- Specifications and appearances of any product are only for information; take practicality as the standard.
- It is recommended that users choose HD Cable with a length of not more than 1.2 meters, 128 braid nets and four layers of shielded dual magnetic rings.
Product service
Warranty Period
- The purchase of the company’s products can enjoy one year from the date of purchase of the warranty period. Special agreement to extend the sale period.
During the warranty period, users can enjoy a valid purchase certificate, free of charge, and after-sales maintenance services.
The following is not a free warranty EVPAD can provide paid service
- Has exceeded the valid warranty period.
- Failure to follow the instructions required by the installation, use, maintenance and storage of the fault or damage.
- Failure or damage caused by a repair by a non-EVPAD authorised service person.
- Due to accidental factors or the behaviour of the product damage, such as broken, Water, input voltage, corrosion, etc.
- Unauthorised changes to the product’s native configuration files or unverified product firmware without EVPAD’s approval.
- Unauthorised alteration, tearing up the after-sales service card, or product serial number.
- Damage caused by transportation, loading and unloading on the way back to be repaired by the customer.
- Failure and damage caused by flood, fire, lightning and other irresistible forces.
- Other non-product-related design, technology, and manufacturing quality problems caused by failure or damage
Special Reminder
- Before use, please be sure to carefully read the product manual
- Dealers to you to make we commit to guaranteeing that we do not assume responsibility for this Division
- Before product repair, please contact our technical service, seek technical support to confirm the product failure.
Installation Diagram
How To Connect To The Internet
- Be sure the network cable which connects to the set-top box is from the router, and the router’s DHCP feature is turned on.
- Connect the network cable to the LAN port of set set-top box, make sure it is a good connection with the internet cable and router.
Connect WIFI
- Set > Wif > Select the desired wireless connection > Enter password
Voice remote control instructions
Instruction of the Learning Function
- Press the programmable POWER
key of the TV Box Remote Control for 5 seconds. The LED light will turn on, indicating that the programmable keys are in the programmable state. - Press one of the programmable keys of the TV Box Remote Control, and its LED light will flash.
- Direct the head of the TV Remote Control at the head of the TV Box Remote Control.
- (Please keep a 3-5cm distance between the two Remote Controls.)
- Press down the original key of the TV Remote Control, the LED light of the TV Box Remote Control will flash 3 times quickly and then stay lit up, indicating that the programmable key has been programmed. To program other keys, please repeat steps 2-3-4.
- The LED light will flash 5 times if the programmable key fails to be programmed.
- If so, please repeat steps 2-3-4.
- Press any non-programmable key of the TV Box Remote Control to exit the programmable state.
- When you press the key, the LED flashes continuously for more than 10 seconds, indicating the battery is low. Please replace the battery.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Documents / Resources
 |
Aihome EVPAD Media Player [pdf] Instruction Manual 12P12S, 2A4G812P12S, EVPAD Media Player, EVPAD, Media Player, Player |