8BitDo Retro 108 Mechanical Keyboard
Product Overview
- Interfaces for BBitDo Super Buttons are for 8BitDo Keybaord Extensions only.
System requirements for devices with built-in Bluetooth Low Energy or USB port:
- Windows 10(1903) or above
- Android 9.0 or above
- Factory Reset: Hold the Pair button+ Fast key mapping button+ Profile button for 5 seconds, all the LED indicators will start to blink. (All custom profiles, Bluetooth pairing, key mappings, and swapped keys will be reset.
- Mode switch
- Volume knob
- Pair button
- Connection indicator
- Fast key mapping button
- Key mapping indicator
- Profile button
- Profile indicator
- Super buttons
- Power indicator
- 3.5mm interfaces for Super Buttons and other extensions
- USB Type-C port
- 2.46 Adapter/ Adapter compartment
Parts of the function are only available on Windows.
Wireless Connection
- Turn the Mode switch to 2.4.
- Connect the 2.46 adapter to the USB port of your device, the Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection.
Re-pair the Keyboard and the Adapter:
- Turn the Mode switch to 2.4.
- Hold the Pair button for 3 seconds to enter its pairing mode, the Connection indicator will start to blink rapidly.
- Connect the adapter to the USB port of your device.
- The Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection.
Wired Connection
- Turn the Mode switch to OFF.
- Connect the keyboard to the USB port of your device and wait till the keyboard is successfully recognized by your device before using it.
Bluetooth Connection
- Turn the Mode switch to BT.
- Hold the Pair button for 3 seconds to enter its pairing mode, the Connection indicator will start to blink rapidly. (This is required for the very first time only.
- Go to your device’s Bluetooth list and pair with “8BitDo Retro 108 Keyboard”, the Connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection.
Battery
200 hours of usage time with a 2000mAh built-in battery, rechargeable with 4 hours charging time.
- The keyboard will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection.
- The keyboard will not shut down during wired connection.
- Charging and battery life depend on variations in settings or environmental factors, and actual results may vary.
Fast Key Mapping
- You can assign up to 6 keys to a Programmable key at the same time.
- Press the Fast key mapping button first, then press the Programmable key to cancel the mapped key. Hold the Fast key mapping button for 5 seconds to clear all the fast key mappings.
- The Key mapping indicator will blink rapidly when the mapped Programmable button is pressed.
- The fast key mapping mode will automatically exit after 60 seconds of no activity.
Fast Key Swap
- Swappable keys: Ctrl, Win, Alt and Shift.
- The Key mapping indicator will blink rapidly when the swapped key is pressed.
For example: 
Custom Profile/Macro/Firmware Update
Please visit app.Bbitdo.com to download the Ultimate Software to get the latest firmware & additional support.
Support
Please visit support.8bitdo.com for further information & additional support.
Safety Warnings
- Please always use batteries, chargers, and accessories provided by the manufacturer.
- The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
- Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
- Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
- Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.
Documents / Resources
 | 8BitDo Retro 108 Mechanical Keyboard [pdf] Instruction Manual Retro 108, Retro 108 Mechanical Keyboard, Mechanical Keyboard, Keyboard |
