1Mii B0303 2 In 1 Bluetooth Transmitter and Receiver

In the box

Product overview

Basic operation

TX mode

Connect B310Pro to power supply & Connect suitable cable to TV

Power on

Short press to power on.

Slide mode switch to “TX” side.

Pair

B310Pro will get in pairing mode automatically. Set your Bluetooth headphone/speaker to pairing mode, wait for them to connect.

Play

RX mode

Connect B310Pro to power supply & Connect suitable cable to speaker

Power on

Short press to power on

Slide mode switch to “RX” side.

Pair

B310Pro will get in pairing mode automatically. Turn on Bluetooth of phone/tablet/pc. Search for “B310Pro” and connect.

Play

Bypass mode (Non-Bluetooth)

Connect B310Pro to power supply & Connect suitable cable to speaker and TV

Power on

Short press to power on

Slide mode switch to “Bypass” side.

Play

As a Wireless Transmitter (TX Mode) 

1. Connect audio source (TV, DVD etc.), to B310Pro “From TV” port with the audio cables provided (optical or AUX/RCA)
2. Connect B310Pro to power source (TV, PC USB socket or power adapter) with USB cable.
3. Short press button to power on.
4. Slide Mode switch to the “X” position.
5. Pair B310Pro with your Bluetooth-enabled headsets/speakers.
   1. B310Pro pairing mode = TX LED flash blue / red alternately fast.
      • First time use: B310Pro auto enter pairing mode (with clear memory)
      • Afterward: press button for 2 seconds to enter.
   2. Set your headsets/speakers to pairing mode refer to its user manual.
   3. Wait and connected.

As a Wireless Receiver (RX mode)

1. Connect your speaker to B310Pro “To Speaker” port with the audio cable provided (optical or AUX/RCA) .
2. Connect B310Pro to power source with USB cable and adapter.
3. Short press button to power on.
4. Slide Mode switch to the “RX” position.
5. Pair B310Pro with your Bluetooth-enabled phone/pc/tablet.
   1. B310Pro pairing mode = RX LED flash blue / red alternately fast.
      • First time use: B310Pro auto enter pairing mode (with clear memory) .
      • Afterward: press  button for 2 seconds to enter.
   2. Active Bluetooth on your phone or other device to find “B310Pro” to connect.
   3. Wait and connected.

Bypass mode (Non-Bluetooth mode)

1. Connect audio source (TV, DVD etc.), to B310Pro “From TV” port with the audio cables provided (optical or AUX/ RCA) .
2. Connect your speaker to B310Pro “To Speaker” port with your own audio cable (optical or AUX/RCA) .
3. Connect B310Pro to power source with USB cable and adapter.
4. Short press button to power on.
5. Slide Mode switch to the “Bypass” position.
6. Ready for use.

Important Notice:

1. Make sure your (TV) output works. AUX test with earphones.
2. Does NOT support Dolby / DTS when transmitting with optical cable.
3. Bypass can only works with the same type of input / output i.e. AUX input to AUX output or OPT input to OPT output.

Trouble shooting

1. I am having trouble pairing and connecting to my Bluetooth device.Please check the following:
   1. Your wireless device supports the wireless profiles listed in the specifications.
   2. B310Pro and your device are next to each other or within 3 feet / 1 meter.
   3. Make sure both B310Pro and the wireless device are in pairing mode.
2. After connecting and pairing with my wireless device, I cannot hear any musicfrom my sound system.

In Optical mode, B310Pro support device with sampling rate under 48KHZ.
Note: Need to make sure TV audio format is set to PCM (Fig-1) and TV sound out as “External Speakers” (Fig-2)

CE
ANKBIT international. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.* In accordance with Article 10 (2) and Article 10 (10) , this product is allowed to be used in all EU member states.

Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal
Always dispose of the used appliance at a recycling center.
Do not dispose the used appliance together with household waste.
Qualcomm apt is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com

Scan the QR code to get more information.

• Operator: Ankbit International Limited
• Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
• Manufacturer: ShenZhen Ankbit Electronics Limited
• Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan
  Dist., Shenzhen, China

We hope you never have the need, but if you do, our service is friendly and hassle-free.
support@lmii.com
www.lmii.com
FCC ID: 2AUFR-RT230

Documents / Resources

1Mii B0303 2 In 1 Bluetooth Transmitter and Receiver [pdf] User Manual RT230Q2, B0303 2 In 1 Bluetooth Transmitter and Receiver, B0303, 2 In 1 Bluetooth Transmitter and Receiver, Bluetooth Transmitter and Receiver, Transmitter and Receiver, and Receiver, Receiver

References

• User Manual