Pinolino 110032 Cot Bed Florian
PLEASE READ CAREFULLY!
GARA UCHITARISIRA FUTURE REFERENCE
We are glad that you have chosen this premium product. We, the Pinolino staff, have manufactured this item with greatest care. The materials that were used are eco-friendly and comply with the strict European safety standards.
Kuti urege kushanda zvisina basa, nyatsoverenga mirayiridzo yegungano kutanga. Nyatsoongorora kana mune zvikamu zvose uye nyatsoongororai mifananidzo yacho musati matanga gungano. Kubata zvisina kunaka kana kusangana uye kunyanya shanduko yekuvaka inobvisa zvese zvewaranti.
One of the bedsides has three removable bars, which can be detached. To pull out the removable bars, first push them upwards and then take them out on a side. Mounting is done in reverse order. To avoid impermissible opening dimensions, all removable bars must be removed when a removable bar is removed.
Please check regularly that the screws are well tightened. The screws can loosen, leading to snag points or objects getting caught. The mattress support has three height positions. Please make sure that the mattress support is set in the right position, so that the child will not fall. The lowest position is the safest position. As soon as the child can sit up, the mattress base should only be used in this position.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric screwdriver for tightening the screws!
Use only original accessories and spare parts from the producer or from the providers. Plastic bags and other plastic elements / wrappings should be removed immediately and kept out of the reach of children!
Please set the parts on an even, flat surface. Make sure that the article isn’t inclined.
We recommend using the packaging of the article as underlay in order to protect it and its bottom side.
Do not use the cot if single parts are missing, broken or torn. Use only original spare parts recommended by Pinolino.
To prevent the child from falling out, the cot should no longer be used if the child is able to climb out of the cot.
Objects that can serve as footholds, or ones that present the hazard of suffocation or strangling, e.g. laces, drapery or curtain chords etc., must not be left inside the cot.
The mattress must be chosen so that the depth of the cot (mattress upper surface to top edge of the bed frame) will be at least 50 cm in the lowest position of the mattress support and at least 20 cm in its highest position. The mattress size should be 140 cm x 70 cm, or at least 139 cm x 68 cm. The maximum thickness of the mattress for this bed must be 10 cm.yambiro
Usambofa washandisa matiresi anopfuura imwe chete pamubhedha.
The size of mattress must ensure that the gap between the mattress and the side ends is no more than 30 mm, however the mattress is positioned.
Make sure that the bed is not in the close proximity of open fires or strong heat sources, e.g. electric heaters, gas stoves.
Chengetedza chirongwa chegungano uye kiyi yehekisi yekuzoparadzana kana kusangana.
Pukuta nejira rakachena, rakanyorova. Wana zvakare ruzivo pa www.pinolino.de.
What else you should know
Mukugadzira fenicha yedu uye matoyi isu tinongoshandisa zvinhu, mafuta, varnish uye glazes izvo zvisingakonzere njodzi yehutano uye zvakakodzerwa nemidziyo yevana. Nekuda kwemaitiro ekugadzira, fenicha nyowani dzimwe nguva inogona kuchengetedza kunhuhwirira chaiko. Kurwisa kusagadzikana uku kusingakuvadzi isu tinokurudzira kudzokorora mhepo.
WITHOUT RECONSIGNMENT OF THIS ASSEMBLY PLAN AND OF THE RECEIPT, POSSIBLE COMPLAINTS WILL NOT BE TAKEN INTO CONSIDERATION.
Zvinyorwa / Zvishandiso
|Pinolino 110032 Cot Bed Florian [pdf] Bhuku reMirayiridzo|
110032, Cot Bed Florian, 110032 Cot Bed Florian