TP-Link PoE Injector Installation Guide

Models: TL-POE160S, TL-POE170S

LED Explanation

PWR

On: Power on
Off: Power off

PoE (Only for TL-POE170S)

On: Normal power supply
Off: No powered device connected
Flashing: Abnormal power supply

For simplicity, this guide uses the TL-POE160S as an example.

Connection Overview

The diagram illustrates the following components and connections:

Diagram Components:

Powered Device (PD): This can be an IP Camera, Access Point (AP), or IP Phone.
PoE+ Injector: Features ports labeled 'DATA IN', 'PWR+DATA OUT', and 'PWR'.
Ethernet Device: Such as a switch or router.

The connection flow is: The Ethernet Device connects to the 'DATA IN' port of the PoE Injector. The 'PWR+DATA OUT' port of the PoE Injector connects to the Powered Device (PD). The PoE Injector is powered via a standard AC power input.

Notes:

The PoE Injector supplies steady power and data connectivity to a powered device such as a PoE IP Camera, PoE AP, and PoE IP Phone through an Ethernet cable.
For the TL-POE170S, plug the product into wall outlets with an earthing connection through the power supply cord.

Specifications

General Specifications

Feature	Details
Standards	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at IEEE 802.3bt (Only for TL-POE170S)
LED	TL-POE160S: PWR TL-POE170S: PWR, PoE
Cable Type	UTP/STP of Cat. 5 or above (based on the standards that the connected devices comply with)
Ports	10/100/1000 Mbps RJ45 DATA IN Port 10/100/1000 Mbps RJ45 PWR+DATA OUT Port AC 100-240 V 50/60 Hz Power Input Port
Maximum Power Supply	TL-POE160S: 30 W TL-POE170S: 60 W
Dimensions (L×W×H)	TL-POE160S: 125×59.4×36.8 mm TL-POE170S: 154.7×70×42 mm
Wall Mountable	Yes
Distance Between Mounting Holes	TL-POE170S: 102 mm

Environmental and Physical Specifications

Feature	Details
Operating Temperature	TL-POE160S: 0°C to 40°C (32°F to 104°F) TL-POE170S: 0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% RH non-condensing

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. For service, contact TP-Link.
The power supply cord's plug serves as the disconnect device; the socket-outlet should remain easily accessible.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that accidents or damage will not occur due to improper use. Use this product with care and at your own risk.

Frequently Asked Questions (FAQ)

Q1. Can the PoE injector supply power to a PoE device which doesn't have a gigabit PoE port?

A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps speeds.

Q2. What can I do if my PoE injector doesn't supply power to the powered device or the supplied power is unstable?

A1: Ensure the Powered Device (PD) is PoE-compliant and its connecting port supports the PoE function.

A2: Verify that the power consumption of the PD does not exceed the maximum power supply of the PoE injector. If it does, the injector's overload protection may activate. The quality and length of the Ethernet cable can also affect power reception.

Support and Compliance

For questions, answers, and community interaction with TP-Link users and engineers, visit the TP-Link Community.

For technical support and other information, please visit TP-Link Support.

For suggestions or needs regarding product guides, email: techwriter@tp-link.com.cn.

TP-Link declares that this device complies with essential requirements and relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity is available at TP-Link EU Support.

TP-Link also declares compliance with the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity is available at TP-Link UK Support.

Compliance Marks: EAC, UK, CA

	TP-Link TL-POE160S PoE+ 인젝터 데이터시트 TP-Link TL-POE160S PoE+ 인젝터의 기능, 사양, 작동 환경 및 다이어그램에 대한 상세 정보. IEEE 802.3af/at 표준 지원.
	TP-Link Omada PoE++ Injector POE170S Datasheet Datasheet for the TP-Link Omada PoE++ Injector POE170S, detailing its specifications, features, and compliance with IEEE 802.3af/at/bt standards for high-power PoE delivery up to 60W.
	TP-LINK TL-POE160S V2 Gigabit Power Injector - Technical Specifications Detailed technical specifications for the TP-LINK TL-POE160S V2 Gigabit Power Injector, including features, power capabilities, connectivity, and environmental conditions.
	TP-Link Omada 10G PoE++ Injector (POE380S) Datasheet Datasheet for the TP-Link Omada POE380S, a 10G PoE++ Injector providing up to 90W of power, compliant with IEEE 802.3af/at/bt standards.
	TP-Link Omada POE160S PoE+ Injector Datasheet Datasheet for the TP-Link Omada POE160S PoE+ Injector, featuring 2 Gigabit ports, IEEE 802.3af/at compliance, and up to 30W PoE power output for expanding network reach.
	TP-Link TL-SG205E 5-Port Gigabit Easy Managed Switch Datasheet \| Specifications and Features Datasheet for the TP-Link TL-SG205E, a 5-Port Gigabit Easy Managed Switch. This document details its hardware and software specifications, including port details, performance metrics, physical dimensions, and advanced features like VLAN, QoS, and IGMP Snooping. Ideal for small to medium business networks.
	TP-LINK TL-POE150S PoE Injector: Features, Specifications, and Use Cases Discover the TP-LINK TL-POE150S PoE Injector. Learn about its IEEE 802.3af compliance, cost-saving benefits, technical specifications, and how it extends network connectivity for devices like IP cameras, phones, and access points.
	TP-Link TL-SG1210P: 10-Port Gigabit Desktop PoE+ Switch Datasheet Detailed datasheet for the TP-Link TL-SG1210P, a 10-port gigabit desktop switch featuring 8 PoE+ ports, 20 Gbps switching capacity, and IEEE 802.3af/at compliance. Learn about its features, specifications, and performance.