AT Mirayiridzo Set
E90-DTU(xxxSLxx-ETH)_V2.0
Basic basa AT command set
Mirayiridzo yekushandiswa kweE90-DTU (xxxSLxx-ETH) yekuraira bhuku:
- Pinda iyo AT yekuraira mode: serial port inotumira +++ , tumira AT zvakare mukati memasekondi matatu, uye mudziyo unodzoka + OK , wozoisa AT command mode;
- Iri bhuku remirayiridzo rinotsigira E90-DTU(230SL22-ETH)_V2.0, E90-DTU(230SL30- ETH)_V2.0, E90-DTU(400SL22-ETH)_V2.0, E90-DTU(400SL30-ETH) _V2.0. 90, E900- DTU(22SL2.0-ETH)_V90, E900-DTU(30SL2.0-ETH)_V90 nemamwe EXNUMX magedhi;
- Muchinyorwa chinotevera, “ ” uye “\r\n” zvinomiririra kudimburwa kwemitsara mumafomati akasiyana emavara, ari chaizvo HEX (0x0D uye 0x0A);
- Tsigiro network AT yekuraira gadziriso, iyo inogona kuona network AT kumisikidzwa kuburikidza neTCP/UDP transparent transparent mode, ndapota usashandise AT kumisikidza muModbus gedhi mode.
- TCP server/TCP mutengi kushandiswa:
- UDP Server/UDP Client Use:
Error Code Table:
| Error Code | Enzanisirai |
| -1 | Format Yekuraira Haisiyo |
| -2 | Mirairo isiriyo |
| -3 | Haisati Yatsanangurwa |
| -4 | Invalid Parameter |
| -5 | Haisati Yatsanangurwa |
1.1 Pfupiso yeBasic Configuration Mirayiridzo
| Command | Enzanisirai |
| AT+ EXAT | Buda AT configuration mode |
| AT+MODEL | Mutevedzeri wemudziyo |
| PA + ZITA | zita remudziyo |
| AT+SN | ID yemudziyo |
| AT+REBT | Reboot mudziyo |
| AT+RESTORE | Reset |
| AT + VER | Query firmware version |
| AT+UART | Serial port parameters |
| AT + MAC | Mudziyo MAC kero |
| AT+LORA | Wireless parameters yemuchina |
| AT+REMOLORA | Gadzirisa kure kure wireless parameters |
| AT+WAN | Device network parameters |
| AT+LPORT | Device port |
| AT+SOCK | Kushanda modhi uye chinangwa network parameters |
| AT+LINKSTA | Mhinduro yemamiriro ekubatanidza |
| AT+UARTCLR | Batanidza serial port cache mode |
| AT+REGMOD | Registration Package Mode |
| AT+REGINFO | Registration Package Zviri mukati |
| AT+HEARTMOD | Heartbeat Packet Mode |
| AT+HEARTINFO | Zvemukati zvepasuru yemoyo |
| AT+SHORTM | Kubatana kwenguva pfupi |
| AT+TMORST | Timeout restart |
| AT+TMOLINK | Tangazve mushure mekudimbura |
| AT +WEBCFGPORT | Web configuration port |
1.2 Pinda AT Command
| Command | AT |
| Function | Pinda AT command mode |
| Send | AT |
| Dzoka | +Zvakanaka / +OK=AT gonesa |
| Remark | Inodzoka kana pasina chinongedzo uye gadziriso:+OK=AT gonesa Dzoka kana paine chinongedzo:+Zvakanaka |
【Eksample】
Tumira +++ kutanga usina mutsara mutsva
Hapana kutyora mutsara kunodiwa pakutumira AT
Yatambirwa \r\n+OK\r\n或\r\n+OK=AT gonesa\r\n
1.3 Buda AT Command
| Command | AT+ EXAT |
| Function | Pinda AT command mode |
| Send | AT+ EXAT |
| Dzoka | +Zvakanaka |
【Eksample】
Tumira: AT+EXAT\r\n
Yatambirwa:\r\n+OK\r\n
Mirira kuti mudziyo utangezve.
1.4 Mubvunzo Muenzaniso
| Command | AT+MODEL |
| Function | Query Model |
| Send | AT+MODEL |
| Dzoka | +OK= |
| Remark | Muenzaniso: NA111 |
| NA111-A | |
| NA112 | |
| NA112-A | |
| NS1 | |
| NT1 | |
| NT1-B |
【Eksample】
Tumira:AT+MODEL\r\n
Yatambirwa:\r\n +OK=NA111-A\r\n
1.5 Mubvunzo/Seta Zita
| Command | PA + ZITA |
| Function | Mubvunzo, Seta zita |
| Tumira Mubvunzo) | AT+NAME |
| Dzorera Mubvunzo) | +OK= |
| Send Set | AT+NAME= (Kuganhurira 10 Bytes) |
| Return Set. | +Zvakanaka |
【Eksample】
Bvunza:
Tumira: AT+NAME\r\n
Yatambirwa:\r\n +OK=A0001\r\n
Gadzirira:
Tumira: AT+NAME=001\r\n
Yatambirwa: \r\n +OK \r\n
1.6 Mubvunzo/Seta ID
| Command | AT+SN |
| Function | Mubvunzo, Agere |
| Tumira Mubvunzo) | AT+SN |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+SN= (Muganho 24 Bytes) |
| Return Set. | +Zvakanaka |
【Eksample】
Bvunza:
Tumira:AT+SN\r\n
Yatambirwa:\r\n +OK=0001\r\n
Gadzirira:
Tumira:AT+SN=111\r\n
Yatambirwa:\r\n +OK \r\n
1.7 Dzorerazve
| Command | AT+REBT |
| Function | Reboot |
| Send | AT+REBT |
| Dzoka | +Zvakanaka |
【Eksample】
Tumira:AT+REBT\r\n
Yatambirwa:\r\n +OK \r\n
Mirira kuti kutangazve kupedze.
1.8 Gadzirisazve
| Command | AT+RESTORE |
| Function | Reset |
| Send | AT+RESTORE |
| Dzoka | +Zvakanaka |
【Eksample】
Tumira:AT+RESTORE\r\n
Yatambirwa:\r\n +OK \r\n
Mirira kuti Reset ipedze.
1.9 Mubvunzo shanduro Ruzivo
| Command | AT + VER |
| Function | Mubvunzo vhezheni ruzivo |
| Send | AT+VER |
| Dzoka | +Zvakanaka |
【Eksample】
Yakatumirwa:AT+VER\r\n
Yatambirwa:\r\n +OK =9050-0-xx\r\n
[Cherechedza] xx inomiririra shanduro dzakasiyana;
1.10 Mubvunzo MAS Kero
| Command | AT + MAC |
| Function | Mubvunzo MAC Kero |
| Send | AT+MAC |
| Dzoka | +OK= |
| Mashoko | Dzosa chimiro che data"xx-xx-xx-xx-xx-xx" |
【Eksample】
Yakatumirwa:AT+MAC\r\n
Received：\r\n+OK=84-C2-E4-36-05-A2\r\n
1.11 Mubvunzo/Seta Native LORA Parameters
| Command | LORA |
| Function | Gadzirisa zvimiro zvelora |
| Tumira Mubvunzo) | AT+LORA |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+LORA= |
| Return Set. | +Zvakanaka |
| Mashoko | 1. ADDR(kero yenzvimbo):0-65535 2. NETID(Network ID):0-255 3. AIR_BAUD(Air data rate): 300,600,1200,2400,4800,9600,19200 230SL） 300,1200,2400,4800,9600,19200,38400,62500/400SL） 4. PACK_LENGTH(Packet kureba):240, 128, 64, 32 5. RSSI_EN(Ambient Noise Enable) Vhara: RSCHOFF, Vhura: RSCHON 6. TX_POW(Simba rekutumira) Pamusoro: PWMAX, Pakati: PWMID, Yakaderera: PWLOW, Yakanyanya Kuderera: PWMIN 7. CH(Channel):0-64(230SL), 0-83(400SL), 0-80(900SL) 8. RSSI_DATA(Data Noise Inogonesa) Vhara: RSDATOFF, Vhura: RSDATON 9. TR_MOD(nzira yekuendesa) Transparent transparent: TRNOR, fixed point transmission: TRFIX 10. RELAY(Relay function) relay yakavharwa: RLYOFF, relay yakazaruka: RLYON 11. LBT(LBT Enable) Vhara:LBTOFF, Vhura:LBTON 12. SHOKO (Mashoko) WOR mugamuchiri: WORRX, WOR sender: WORTX, Vhara WOR: WOROFF 13. WOR_TIM(WOR nguva, unit ms) 500, 1000, 1500, 2000, 2500, 3000, 3500, 4000 14. CRYPT yekukurukurirana kiyi: 0-65535 |
【Eksample】
Mubvunzo:
Tumira:AT+LORA \r\n
Yakagamuchirwa:
\r\n+OK=0,0,2400,240,RSCHOFF,PWMAX,23,RSDATOFF,TRNOR,RLYOFF,LBTOFF,WOROFF,20 00,0\r\n
Gadzirira:
Tumira:
AT+LORA=0,0,2400,240,RSCHOFF,PWMAX,23,RSDATOFF,TRNOR,RLYOFF,LBTOFF,WOROFF,2000,0\r\n
Yatambirwa:\r\n+OK\r\n
1.12 Seta Remote LORA Parameters
| Command | LORA |
| Function | Gadzirisa zvimiro zvelora |
| Tumira Set Up) | AT+REMOLORA= |
| Return Set Up. | +Zvakanaka |
| Mashoko | 1. ADDR(Kero Yenzvimbo):0-65535 2. NETID(Network ID):0-255 3. BAUD(Baud rate): 1200,2400,4800,9600,19200,38400,57600,115200 PARITY(Data bits, parity bits, stop bits) 8N1, 8O1, 8E1 4. AIR_BAUD(Air data rate): 300,600,1200,2400,4800,9600,19200(230SL) 300,1200,2400,4800,9600, 19200,38400,62500/400SL) 5. PACK_LENGTH(Packet kureba):240, 128, 64, 32 6. RSSI_EN(Ambient Noise Enable): Vhara: RSCHOFF, Vhura: RSCHON 7. TX_POW(Simba rekutumira) Pamusoro: PWMAX, MIDlet: PWMID, Yakaderera: PWLOW, Pasi: PWMIN 8. CH(Channel):0-64(230SL), 0-83(400SL), 0-80(900SL) 9. RSSI_DATA(Data Noise Inogonesa): Vhara: RSDATOFF, Vhura: RSDATON 10. TR_MOD(nzira yekufambisa): Transparent transmission: TRNOR, fixed point transmission: TRFIX 11. RELAY (Relay basa): relay yakavharwa: RLYOFF, relay yakazaruka: RLYON 12. LBT(LBT Inogonesa): Vhara:LBTOFF, Vhura:LBTON 13. KUSHANDA (WOR Mode): WOR Receiver: WORRX, WOR Sender: WORTX, Close WOR: WOROFF 14. WOR_TIM(WOR Cycle, Unit ms): 500, 1000, 1500, 2000, 2500, 3000, 3500, 4000 15. CRYPT yekukurukurirana kiyi: 0-65535 |
[Cherechedza]: Iyo yekumisikidzwa iri kure inofanirwa kuve yakabatana neyakajeka kutapurirana kusati kwabudirira, uye yakaderera airspeed kumisikidza uye sub-packet yakakura kupfuura 128Bit inogona kutumirwa zvinobudirira.
【Eksample】
Bvunza:
Tumira: AT+AT+REMOLORA\r\n gamuchira:
\r\n+OK=0,0,115200,8N1,2400,240,RSCHOFF,PWMAX,16,RSDATOFF,TRNOR,RLYOFF,LBT OFF,WOROFF,2000,0\r\n Gadzirira:
Tumira:
AT+HTTPREQMODE=0,0,115200,8N1,2400,240,RSCHOFF,PWMAX,16,RSDATOFF,TRNOR,RL
YOFF,LBTOFF,WOROFF,2000,0\r\n
Yatambirwa:\r\n+OK\r\n
1.13 Mubvunzo/Seta Network Parameters
| Command | AT+WAN |
| Function | Query/set Network Parameters |
| Tumira Mubvunzo) | AT+WAN |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+WAN= |
| Return Set. | +Zvakanaka |
| Mashoko | Mode: DHCP/STATIC Kero: Yenzvimbo IP kero Mask: subnet mask Gedhi: gedhi DNS:DNS server |
【Eksample】
Bvunza:
Tumira: AT+WAN\r\n
Yagamuchirwa: \r\n+OK= STATIC ,192.168.3.7,255.255.255.0,192.168.3.1,114.114.114.114\r\n
Zvirongwa: (Dynamic IP)
Tumira: AT+WAN=DHCP, 192.168.3.7,255.255.255.0,192.168.3.1,114.114.114.114\r\n
Yatambirwa:\r\n+OK\r\n
Zvirongwa: (Static IP)
Tumira: AT+WAN=STATIC,192.168.3.7,255.255.255.0,192.168.3.1,114.114.114.114\r\n
Yatambirwa:\r\n+OK\r\n
1.14 Mubvunzo/Seta Nhamba Yenzvimbo Yechiteshi
| Command | AT+LPORT |
| Function | Mubvunzo/Seta Nhamba Yenzvimbo Yechiteshi |
| Tumira Mubvunzo) | AT+LPORT |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+LPORT= |
| Return Set. | +Zvakanaka |
| Mashoko | Kukosha (nhamba yechiteshi): 0-65535,0 (mutengi wemutengi anoshandisa chiteshi chisina kujairika, uye sevha mode inoda kushandisa iyo "isina-0" parameter, zvikasadaro sevha yechishandiso ichatadza kuvhura); |
【Eksample】
Bvunza:
Tumira: AT+LPORT\r\n
Yatambirwa:\r\n+OK=8887\r\n
gadzirira:
Tumira: AT+LPORT=8883\r\n
Yatambirwa:\r\n+OK\r\n
1.15 Kubvunza / kuseta maitiro ekushanda emuchina uye network paramita yechinhu chakanangana
| Command | AT+SOCK |
| Tumira Mubvunzo) | Kubvunza uye kuseta network protocol paramita |
| Dzoka (Mubvunzo) | AT+SOCK |
| Send Set | +OK= |
| Return Set. | AT+SOCK= |
| Mashoko | +Zvakanaka |
| Function | Muenzaniso (kushanda mode): TCPC, TCPS, UDPC, UDPS, MQTTC, HTTPC; Remote IP (target IP / domain name): yakawanda ye128-character domain name inogona kugadzirwa; Remote Port: 1-65535; |
【Eksample】
Bvunza:
Tumira: AT+SOCK\r\n
Yatambirwa:\r\n+OK=TCPC,192.168.3.3,8888\r\n
gadzirira:
Tumira: AT+SOCK=TCPC,192.168.3.100,8886\r\n
Yatambirwa:\r\n+OK\r\n
1.16 Query Network Link Status
| Command | AT+LINKSTA |
| Function | Query Network link Status |
| Send | AT+LINKSTA |
| Dzoka | +OK= |
| Mashoko | STA: Batanidza / Bvisa |
【Eksample】
Tumira: AT+LINKSTA\r\n
Yatambirwa:\r\n+OK=Dimbura\r\n
1.17 Mubvunzo/Set Serial Port Cache Clearing Status
| Command | AT+UARTCLR |
| Function | Kubvunza uye kuseta serial port cache yekubvisa chimiro |
| Tumira Mubvunzo) | AT+UARTCLR |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+UARTCLR= |
| Return Set. | +Zvakanaka |
| Mashoko | STA: ON (Gonesa kubatana kuti ubvise cache) KUDZIMA (Dzivisa kubatana kwakajeka cache) |
【Eksample】
Bvunza:
Tumira: AT+UARTCLR\r\n
Yatambirwa:\r\n+OK=ON\r\n
gadzirira:
Tumira: AT+UARTCLR=OFF\r\n
Yatambirwa:\r\n+OK\r\n
1.18 Mubvunzo/seta Registration Package Mode
| Command | AT+REGMOD |
| Function | Query / set Registration Package Mode |
| Tumira Mubvunzo) | AT+REGMOD |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+REGMOD= |
| Return Set. | +Zvakanaka |
| Mashoko | Mamiriro: DZIMA - Yakaremara OLMAC - Tumira MAC pakubatana kwekutanga OLCSTM - Kutanga Kubatanidza Tumira Tsika EMBMAC - tumira MAC packet EMBCSTM - Tumira Per Packet Tsika. |
【Eksample】
Bvunza:
Tumira: AT+REGMOD\r\n
Yatambirwa:\r\n+OK=OFF\r\n
gadzirira:
Tumira: AT+UARTCLR=OLMAC\r\n
Yatambirwa:\r\n+OK\r\n
1.19 Kubvunza/seta tsika yekunyoresa pasuru zvemukati
| Command | REGINFO |
| Function | Mubvunzo/seta zvemukati zvekunyoresa pasuru |
| Tumira Mubvunzo) | AT+HEARTINFO |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+HEARTINFO= |
| Return Set. | +Zvakanaka |
| Mashoko | Mode: data format (HEX) hexadecimal, (STR) tambo; Data data: ASCII muganho 40 bytes, HEX muganho 20 bytes; |
【Eksample】
Bvunza:
Tumira: AT+REGINFO\r\n
Yatambirwa:\r\n+OK=STR,regist msg\r\n
gadzirira:
Tumira: AT+REGINFO=STR,EBTYE TEST\r\n
Yatambirwa:\r\n+OK\r\n
1.20 Kubvunza/seta iyo yekurova kwemoyo packet modhi
| Command | AT+HEARTMOD |
| Function | Kubvunza/seta iyo yekurova kwemoyo packet modhi |
| Tumira Mubvunzo) | AT+ HEARTMOD |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+HEARTMOD= |
| Return Set. | +Zvakanaka |
| Mashoko | Mode: HAPANA (yakavharwa), UART (serial heartbeat), NET (network heartbeat); Nguva: nguva 0-65535s, 0 (vhara kurova kwemoyo); |
【Eksample】
Bvunza:
Tumira: AT+HEARTMOD\r\n
Yatambirwa:\r\n+OK=HAPANA,0\r\n
Tumira: AT+HEARTMOD =NET,50\r\n
Yatambirwa:\r\n+OK\r\n
1.21 Mubvunzo/seta kurova kwemoyo data
| Command | AT+HEARTINFO |
| Function | Mubvunzo/seta data rekurova kwemoyo |
| Tumira Mubvunzo) | AT+HEARTINFO |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+HEARTINFO= |
| Return Set. | +Zvakanaka |
| Mashoko | Mode: data format (HEX) hexadecimal, (STR) tambo; Data data: ASCII muganho 40 bytes, HEX muganho 20 bytes; |
【Eksample】
Bvunza:
Tumira: AT+HEARTINFO\r\n
Yatambirwa:\r\n+OK=STR,moyo unorova msg\r\n
gadzirira:
Tumira: AT+HEARTINFO=STR,EBTYE HEART TEST\r\n
Yatambirwa:\r\n+OK\r\n
1.22 Mubvunzo/seta nguva pfupi yekubatanidza
| Command | AT+SHORTM |
| Function | Mubvunzo/seta nguva pfupi yekubatanidza |
| Tumira Mubvunzo) | AT+SHORTM |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+SHORTM= |
| Return Set. | +Zvakanaka |
| Mashoko | Nguva: Limit 2-255s, 0 yadzimwa; |
【Eksample】
Bvunza:
Tumira: AT+SHORTM\r\n
Yatambirwa:\r\n+OK=0\r\n
gadzirira:
Tumira: AT+SHORTM=5\r\n
Yatambirwa:\r\n+OK\r\n
1.23 Kubvunza/seta nguva yekumisa kudzoreredza nguva
| Command | AT+TMORST |
| Function | Query/set timeout restart time |
| Tumira Mubvunzo) | AT+TMORST |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+TMORST= 60-65535s, |
| Return Set. | +Zvakanaka |
| Mashoko | Nguva: Limit 2-255s, 0 yadzimwa; |
【Eksample】
Bvunza:
Tumira: AT+TMORST\r\n
Yatambirwa:\r\n+OK=300\r\n
gadzirira:
Tumira: AT+SHORTM=350\r\n
Yatambirwa:\r\n+OK\r\n
1.24 Kubvunza/seta nguva uye nguva dzekudimburwa nekubatanidzazve
| Command | AT+TMOLINK |
| Function | Bvunza/seta nguva uye nguva dzekudimburwa nekubatanidzazve |
| Tumira Mubvunzo) | AT+TMOLINK |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+TMOLINK= |
| Return Set. | +Zvakanaka |
| Mashoko | Nguva (kubvisa uye nguva yekubatanidza): muganhu 1-255, 0 yakavharwa; Num (nguva dzekudzima uye kubatanidzwazve): muganhu 1-60 nguva; |
【Eksample】
Bvunza:
Tumira: AT+TMOLINK\r\n
Yatambirwa:\r\n+OK=5,5\r\n
gadzirira:
Tumira: AT+TMOLINK=10,10\r\n
Yatambirwa:\r\n+OK\r\n
1.25 Web Configuration Port
| Command | AT +WEBCFGPORT |
| Function | Kubvunza uye kuisa web configuration port |
| Tumira Mubvunzo) | AT +WEBCFGPORT |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+TMOLINK= |
| Return Set. | +Zvakanaka |
| Mashoko | CHIPOTI: 2-65535 |
【Eksample】
Bvunza:
Tumira: AT+WEBCFGPORT\r\n
Yatambirwa:\r\n+OK=80\r\n
gadzirira:
Tumira: AT+WEBCFGPORT=80\r\n
Yatambirwa:\r\n+OK\r\n
Modbus basa AT command set
2.1 Pfupiso ye "Modbus Basa" Mirairo
| Command | Tsanangudzo |
| AT+MODWKMOD | Modbus mode |
| AT+ MODPTCL | Protocol kutendeuka |
| AT+ MODGTWYTM | Storage Gedhi Yekuraira Yekuchengeta Nguva uye Yekubvunza Interval |
| AT+MODCMDEDIT | Modbus RTU raira pre-yakachengetwa |
2.2 Query Modbus inoshanda modhi uye yekuraira nguva yekupedza nguva
| Command | AT+MODWKMOD |
| Function | Kubvunza uye kuseta Modbus kushanda modhi |
| Tumira Mubvunzo) | AT+MODWKMOD |
| Dzoka (Mubvunzo) | +OK= |
| Mashoko | Mode: HAPANA (inodzima MODBUS) SIMPL (Simple Protocol Conversion) MULIT (Multi-Master Mode) STORE (Gedhi Rekuchengetedza) CONFIG (Configurable Gateway) AUTOUP (active upload mode) Nguva yapera:0-65535; |
Bvunza:
Tumira: AT+MODWKMOD\r\n
Yatambirwa:\r\n+OK=SIMPL,100\r\n
gadzirira:
Tumira: AT+MODWKMOD=MULIT,1000\r\n
Yatambirwa:\r\n+OK\r\n
2.3 Gonesa Modbus TCP kuModbus RTU protocol shanduko
| Command | AT+ MODPTCL |
| Function | Kubvunza uye kuseta protocol shanduko Modbus TCP<=> Modbus RTU） |
| Tumira Mubvunzo) | AT+ MODPTCL |
| Dzoka (Mubvunzo) | +OK= |
| Mashoko | Mode: ON (Gonesa shanduko yeprotocol) DZIMA (Dzinga shanduko yeprotocol) |
Bvunza:
Tumira: AT+MODPTCL\r\n
Yatambirwa:\r\n+OK=ON\r\n
gadzirira:
Tumira: AT+MODPTCL=ON\r\n
Yatambirwa:\r\n+OK\r\n
2.4 Seta Modbus gedhi rekuraira nguva yekuchengeta uye otomatiki yemubvunzo nguva
| Command | AT+ MODGTWYTM |
| Function | Bvunza uye gadzirisa Modbus gedhi rekuraira nguva yekuchengetedza uye otomatiki yemubvunzo kupindirana |
| Tumira (Mubvunzo) | AT+ MODGTWYTM |
| Dzoka (Mubvunzo) | +OK= |
| Mashoko | Nguva1: Nguva yekuchengetedza yekuraira (1-255 masekondi) Nguva2: Automatic query interval time (1-65535 milliseconds) |
Bvunza:
Tumira: AT+MODGTWYTM\r\n
Yatambirwa:\r\n+OK=10,200\r\n
gadzirira:
Tumira: AT+MODGTWYTM=5,100\r\n
Yatambirwa:\r\n+OK\r\n
2.5 Kubvunza uye kugadzirisa kwemirairo isati yachengetwa yeModbus yekumisikidza gedhi
| Command | AT+MODCMDEDIT |
| Function | Kubvunza uye kugadzirisa kwemirairo isati yachengetwa yeModbus yekumisikidza gedhi |
| Tumira Mubvunzo) | AT+MODCMDEDIT |
| Dzoka (Mubvunzo) | +OK= |
| Mashoko | Mode: ADD wedzera murairo; DEL bvisa rairo; CLR yakajeka murairo; CMD: Modbus command (inongotsigira yakajairwa Modbus RTU murairo, hapana chikonzero chekuzadza mukusimbisa, chete kodhi yebasa rekuverenga rairo 01, 02, 03, 04 inogona kugadziridzwa), haigone kuchengeta iwo murairo mumwechete uye kudzoka + ERR=- 4; |
Bvunza:
Tumira: AT+MODCMDEDIT\r\n
Yatambirwa: \r\n+OK=\r\n
1: 02 03 00 00 00 02\r\n
2: 01 03 00 05 00 00\r\n
gadzirira:
Tumira: AT+MODCMDEDIT=ADD,0103000A0003\r\n(Wedzera murayiro)
Yatambirwa:\r\n+OK\r\n
Tumira: AT+MODCMDEDIT=DEL,0103000A0003\r\n(Delete command)
Yatambirwa:\r\n+OK\r\n
Tumira: AT+MODCMDEDIT=CLR,0103000A0003\r\n(Clear command)
Yatambirwa:\r\n+OK\r\n
Internet yezvinhu AT command set
3.1 Pfupiso ye "IoT Kugona" Directives
| Command | Tsanangudzo |
| AT+HTPREQMODE | HTTP nzira yekukumbira |
| AT+HTPURL | HTTP URL nzira |
| AT+HTPHEAD | HTTP misoro |
| AT+MQTTCLOUD | MQTT chikuva |
| AT+MQTKPALIVE | MQTT kurova kwemoyo kuchengetedza-kurarama nguva |
| AT+MQTDEVID | MQTT Client ID |
| AT+MQTUSER | MQTT Username |
| AT+MQTPASS | MQTT password |
| AT+MQTTPRDKEY | Alibaba Cloud Product Key |
| AT+MQTSUB | MQTT yekunyorera musoro |
| AT+MQTPUB | MQTT buritsa musoro |
3.2 MQTT uye HTTP tarisiro IP kana zita remazita kumisikidzwa
Tarisa ku "Kubvunza / Seta iyo Yekushanda Modhi yeMuchina uye Network Parameters yeTarget Device".
Seta iyo MQTT modhi uye yakananga paramita:
Tumira: AT+SOCK=MQTTC, mqtt.heclouds.com,6002\r\n
Yatambirwa:\r\n+OK\r\n
Seta iyo MQTT modhi uye yakananga paramita:
Tumira: AT+SOCK=HTTPC,www.baidu.com,80\r\n
Yatambirwa:\r\n+OK\r\n
3.3 Mubvunzo/seta nzira yekukumbira yeHTTP
| Command | AT+HTPREQMODE |
| Function | Query/set HTTP chikumbiro nzira |
| Tumira (Mubvunzo) | AT+HTPREQMODE |
| Dzoka (Mubvunzo) | +OK= |
| Tumira (Set) | AT+HTPREQMODE= |
| Return Set. | +Zvakanaka |
| Mashoko | Nzira: GET\POST |
【Eksample】
Bvunza:
Tumira: AT+HTPREQMODE\r\n
Yatambirwa:\r\n+OK=GET\r\n
gadzirira:
Tumira: AT+HTPREQMODE=POST\r\n
Yatambirwa:\r\n+OK\r\n
3.4 Mubvunzo/Seta HTTP URL Path
| Command | AT+HTPURL |
| Function | Mubvunzo/Seta HTTP URL Path |
| Tumira Mubvunzo) | AT+HTPURL |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+HTPURL= |
| Return Set. | +Zvakanaka |
| Mashoko | Nzira: HTTP chikumbiro URL kero yekushandisa (kureba muganhu 0-128 mavara) |
【Eksample】
Bvunza:
Tumira: AT+HTPURL\r\n
Yatambirwa: \r\n+OK=/1.php?\r\n
gadzirira:
Tumira: AT+HTPURL=/view/ed7e65a90408763231126edb6f1aff00bfd57061.html\r\n
Yatambirwa:\r\n+OK\r\n
3.5 Mubvunzo/Seta misoro yeHTTP
| Command | AT+HTPHEAD |
| Function | Mubvunzo/Seta misoro yeHTTP |
| Tumira (Mubvunzo) | AT+HTPHEAD |
| Dzoka (Mubvunzo) | +OK= , |
| Send Set | AT+HTPHEAD= , |
| Return Set. | +Zvakanaka |
| Mashoko | Para (HTTP inodzosa serial port data ine musoro): DEL: isina musoro; ADD: with Baotou; Musoro (HTTP chikumbiro musoro): kureba muganhu 128 mavara; |
【Eksample】
Bvunza:
Tumira: AT+HTPHEAD\r\n
Yatambirwa:\r\n+OK=Delousers-Agent: Mozilla/5.0\r\n
gadzirira:
Tumira: AT+HTPHEAD=ADD, Mugamuchiri: www.ebyte.com\r\n
Yatambirwa:\r\n+OK\r\n
3.6 Mubvunzo/Seta MQTT chikuva chechinangwa
| Command | AT+MQTTCLOUD |
| Function | Mubvunzo/Seta MQTT chikuva chechinangwa |
| Tumira (Mubvunzo) | AT+MQTTCLOUD |
| Dzoka (Mubvunzo) | +OK= |
| Tumira (Set) | AT+MQTTCLOUD= |
| Return Set. | +Zvakanaka |
| Mashoko | Server (MQTT target platform): STANDARD (MQTT3.1.1 standard protocol server) ONENET (OneNote-MQTT server) ALI (Alibaba Cloud MQTT server) BAIDU (Baidu Cloud MQTT Server) HUAWEI (Huawei Cloud MQTT Server) |
【Eksample】
Bvunza:
Tumira: AT+MQTTCLOUD\r\n
Yatambirwa:\r\n+OK=STANDARD\r\n
gadzirira:
Tumira: AT+MQTTCLOUD=BAIDU\r\n
Yatambirwa:\r\n+OK\r\n
3.7 Mubvunzo/seta MQTT chengetedza kurohwa kwemoyo packet yekutumira kutenderera
| Command | AT+MQTKPALIVE |
| Function | Query/set MQTT chengetedza-mheyo inorova packet yekutumira kutenderera |
| Tumira Mubvunzo) | AT+MQTKPALIVE |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+MQTKPALIVE= |
| Return Set. | +Zvakanaka |
| Mashoko | Nguva: MQTT chengeta-ichirarama kurova kwemoyo nguva (muganho 1-255 masekondi, default 60s, hazvikurudzirwe kugadzirisa) |
【Eksample】
Bvunza:
Tumira: AT+MQTKPALIVE\r\n
Yatambirwa:\r\n+OK=60\r\n
gadzirira:
Tumira: AT+MQTKPALIVE=30\r\n
Yatambirwa:\r\n+OK\r\n
3.8 Mubvunzo/seta MQTT Zita reChishandiso (Client ID)
| Command | AT+MQTDEVID |
| Function | Query/set MQTT Device Name (Client ID) |
| Tumira Mubvunzo) | AT+MQTDEVID |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+MQTDEVID= |
| Return Set. | +Zvakanaka |
| Mashoko | Client ID: MQTT mudziyo zita (Client ID) inogumira kune 128 mavara pakureba; |
【Eksample】
Bvunza:
Tumira: AT+MQTDEVID\r\n
Yatambirwa: \r\n+OK=test-1\r\n
gadzirira:
Tumira: AT+MQTDEVID=6164028686b027ddb5176_NA111-TEST\r\n
Yatambirwa:\r\n+OK\r\n
3.9 Mubvunzo/Seta MQTT Username (Zita reMushandisi/Zita reChishandiso)
| Command | AT+MQTUSER |
| Function | Mubvunzo/Seta MQTT Username (Zita reMushandisi/Zita reChishandiso) |
| Tumira Mubvunzo) | AT+MQTUSER |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+MQTUSER= |
| Return Set. | +Zvakanaka |
| Mashoko | Zita reMushandisi: MQTT chigadzirwa ID (Zita reMushandisi / zita remudziyo) rine hurefu hushoma hwemavara e128; |
【Eksample】
Bvunza:
Tumira: AT+MQTUSER\r\n
Yatambirwa:\r\n+OK=ebyte-IOT\r\n
gadzirira:
Tumira: AT+MQTUSER=12345678&a1Ofdo5l0\r\n
Yatambirwa:\r\n+OK\r\n
3.10 Mubvunzo/Seta MQTT Chigadzirwa Pasiwedhi (MQTT password/Chakavanzika Chishandiso)
| Command | AT+MQTPASS |
| Function | Mubvunzo/Seta Logi yeMQTT muPassword (MQTT Password/Chakavanzika Chishandiso) |
| Tumira (Mubvunzo) | AT+MQTPASS |
| Dzoka (Mubvunzo) | +OK= |
| Tumira (Set) | AT+MQTPASS= |
| Dzoka (Set) | +Zvakanaka |
| Mashoko | Password: MQTT login password (MQTT Password / Device Chakavanzika) kureba kunogumira kune 128 mavara; |
【Eksample】
Bvunza:
Tumira: AT+MQTPASS\r\n
Yatambirwa:\r\n+OK=12345678\r\n
gadzirira:
Send: AT+MQTPASS=87654321\r\n
Yatambirwa:\r\n+OK\r\n
3.11 Mubvunzo/Seta Kiyi yeChigadzirwa cheAlibaba Cloud MQTT
| Command | AT+MQTTPRDKEY |
| Function | Mubvunzo/Seta Kiyi yeChigadzirwa cheAlibaba Cloud MQTT |
| Tumira Mubvunzo) | AT+MQTTPRDKEY |
| Dzoka (Mubvunzo) | +OK= |
| Send Set | AT+MQTTPRDKEY= |
| Return Set. | +Zvakanaka |
| Mashoko | Kiyi yechigadzirwa: Kiyi yeChigadzirwa cheAlibaba Cloud (inogumira kune makumi matanhatu nemana mavara) |
【Eksample】
Bvunza:
Tumira: AT+MQTTPRDKEY\r\n
Yatambirwa:\r\n+OK=Kiyi yeChigadzirwa chemushandisi\r\n kumisikidza:
Tumira: AT+MQTTPRDKEY=a1HEeOIqVHU\r\n
Yatambirwa:\r\n+OK\r\n
3.12 Mubvunzo/seta MQTT yekunyorera musoro
| Command | AT+MQTSUB |
| Function | Mubvunzo/seta MQTT yekunyorera musoro |
| Tumira Mubvunzo) | AT+MQTSUB |
| Dzoka (Mubvunzo) | +OK= , |
| Send Set | AT+MQTSUB= , |
| Return Set. | +Zvakanaka |
| Mashoko | Qos: inotsigira chete nhanho 0, 1; Musoro wenyaya: MQTT yekunyorera musoro (inogumira kune 128 mavara pakureba) |
【Eksample】
Bvunza:
Tumira: AT+MQTSUB\r\n
Yatambirwa: \r\n+OK= 0,nyaya \r\n set up:
Tumira: AT+MQTSUB=0,/ggip6zWo8of/NA111-TEST/mushandisi/SUB\r\n
Yatambirwa:\r\n+OK\r\n
3.13 Mubvunzo/Seta MQTT buritsa musoro
| Command | AT+MQTPUB |
| Function | Mubvunzo/Seta MQTT buritsa musoro |
| Tumira (Mubvunzo) | AT+MQTPUB |
| Dzoka (Mubvunzo) | +OK= , |
| Tumira (Set) | AT+MQTPUB= , |
| Dzoka (Set) | +Zvakanaka |
| Mashoko | Qos: inotsigira chete nhanho 0, 1; Musoro wenyaya: MQTT inoburitsa musoro (inogumira kumabhii zana nemakumi maviri nemasere pakureba) |
【Eksample】
Bvunza:
Tumira: AT+MQTPUB\r\n
Yatambirwa: \r\n+OK=0,musoro \r\n
gadzirira:
Tumira: AT+MQTPUB= 0,/ggip6zWo8of/NA111-TEST/user/PUB\r\n
Yatambirwa:\r\n+OK\r\n
AT Configuration Example
4.1 Eksample yekubatanidza kune yakajairwa MQTT3.1.1 server
{ Client id:876275396
mqtt username:485233
mqtt pasiwedhi:E_DEV01
mqtt server: mqtt.heclouds.com
mqtt port:6002}
Dzosa zvigadziriso zvefekitari usati wagadzirisa kudzivirira kugonesa mabasa asina kushandiswa.
TUMA (+++)
3S内TUMA (AT)
RECV(+OK=AT gonesa)
TUMA (AT+RESTORE)
RECV(+OK)
Matanho ari pamusoro anogona kushandisa Hardware kudzorera marongero efekitori.
Danho 1: Pinda AT configuration mode;
TUMA (+++)
3S内TUMA (AT)
RECV(+OK=AT gonesa)
Danho 2: Gonesa dynamic IP, kana iwe ukagadzirisa iyo inoenderana IP yenzvimbo yenzvimbo network
MQTT server, shandisa dynamic IP pano;
TUNDA(AT+WAN=DHCP,192.168.3.7,255.255.255.0,192.168.3.1,114.114.114.114)
RECV(+OK)
Danho 3: Gadzirisa maitiro ekushanda uye kero yeMQTT server uye chiteshi;
TUMIRA(AT+SOCK=MQTTC,mqtt.heclouds.com,6002)
RECV(+OK=Uye chiteshi chemuno chakaiswa ku0)
Danho 4: Sarudza iyo MQTT chikuva;
TUMIRA(AT+MQTTCLOUD=STANDARD) RECV(+OK)
Danho 5: Gadzirisa iyo Client id yemudziyo;
SEND(AT+MQTDEVID=876275396)
RECV(+OK)
Danho 6: Gadzirisa mqtt username yemudziyo;
TUMIRA(AT+MQTUSER=485233)
RECV(+OK)
Danho 7: Gadzirisa iyo mqtt password yemudziyo;
TUNDA(AT+MQTPASS=E_DEV01)
RECV(+OK)
Danho 8: Nyorera kuchinyorwa chinoenderana (Musoro);
TUNDA(AT+MQTSUB=0,EBYTE_TEST)
RECV(+OK)
Danho 9: Gadzirisa musoro unoshandiswa kushambadza;
TUNDA(AT+MQTPUB=0,EBYTE_TEST)
RECV(+OK)
Danho 10: Restart mudziyo;
TUMIRA(AT+REBT)
RECV(+OK)
Kodzero yekupedzisira yekududzira ndeye Chengdu Ebyte Electronic Technology Co., Ltd.
Revision History
| Version | Date | Tsanangudzo | Yakabudiswa na |
| 1.0 | 2022-01-15 | Shanduro yekutanga | LC |
Nezvedu
Tsigiro yehunyanzvi: support@cdebyte.com
Zvinyorwa uye RF Setting download link: www.cdebyte.com/en/
Tel:+86-28-61399028
Fax: 028-64146160
Web:www.cdebyte.com/en/
Kero: Innovation Center B333-D347, 4# XI-XIN Road, Chengdu, Sichuan, China
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co., Ltd.
Zvinyorwa / Zvishandiso
 |
EBYTE E90-DTU Wireless Data Transmission Router Gateway [pdf] Bhuku reMirayiridzo E90-DTU, E90-DTU Wireless Data Transmission Router Gateway, Wireless Data Transmission Router Gateway, Data Transmission Router Gateway, Transmission Router Gateway, Router Gateway |
