LASER TREE manufactures high-optical-power laser modules, driver adapters, and accessories for upgrading CNC machines and DIY laser engravers.
LASER TREE is a specialized manufacturer focused on high-performance laser modules for engraving and cutting applications. The brand offers a wide range of optical power solutions, including 10W, 20W, 30W, 40W, and 60W laser heads, as well as infrared (1064nm) modules for marking metals and plastics.
Designed for compatibility with various CNC frames and engraving machines, LASER TREE products often feature built-in air assist interfaces, dual-fan cooling systems, and advanced driver adapters (such as the P-DA-01) to ensure seamless integration with 12V and 24V systems. Their laser heads rely on beam compression technology to deliver precise cuts through materials like plywood, acrylic, and pine wood.
Mazuvano mabhuku kubva manuals+ yakarongedzwa kune iyi brand.
Tarisa kuseta, kuisa, uye kugadzirisa matambudziko emhando iyi.
Mibvunzo yakajairika pamusoro pezvinyorwa, kunyoresa, uye rutsigiro rwemhando iyi.
If cutting ability decreases, the lens may be dirty. Disconnect power, use a clean alcohol swab to gently wipe the lens, and let it dry naturally for 3 to 5 minutes before use.
No, LASER TREE modules usually do not support hot plugging. Connecting or disconnecting the module while power is on may cause permanent damage to the laser diode.
If your machine is 24V and the module is 12V (or vice versa), or if pin definitions differ, you likely need a driver adapter (e.g., P-DA-01) to bridge the connection safely using an external power supply.
Always wear appropriate laser safety goggles to protect your eyes. Do not expose skin directly to the laser beam. Ensure the air pump is on during cutting to prevent smoke from contaminating the lens.
Built-in air assist helps get clean-cut edges and improves cutting performance. It also helps prevent smoke and debris from settling on the laser lens, which can extend the module's lifespan.