Nhanganyaya
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Safety Information
Gara uchitevera matanho ekutanga ekuchengetedza paunenge uchiisa kana kushandisa zvigadzirwa zvemagetsi kuti uderedze njodzi yemoto, kuvhunduka kwemagetsi, uye kukuvara kwemunhu.
- Power Off: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Indoor Use Chete: Izvi lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Nheyo Yakarurama: Iva nechokwadi chekuti lamp holder is compatible with an E27 base.
- Voltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampzvinodiwa.
- Zvisingadzimike: Izvi lamp is not dimmable. Do not use it with dimmer switches.
- Eye Comfort: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Package Zviri mukati
Pasuru yacho ine:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Installation Instructions
- Dzima Simba: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Bvisa Old Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp mubati.
- Isa New Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Positioning: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Dzosera Simba: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Operating Instruction
Iyi Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Otomatiki Pa/Kudzima: Iyo lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Daylight Sensor: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Motion Sensor: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Light Quality: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Maintenance
The Philips LED Lamp with Sensor requires minimal maintenance.
- Kuchenesa: Iva nechokwadi chekuti magetsi adzima usati wachenesa. Pukuta lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Nzvimbo yeSensor: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Kugadzirisa matambudziko
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Lamp haina kubatidza. |
|
|
| Lamp haidzimi. |
|
|
| Sensor sensitivity seems low. |
|
|
Zvinotsanangurwa
| Feature | Detail |
|---|---|
| Brand | Philips |
| Model Number | 929002058731 |
| Rudzi rweChiedza | LED |
| Wattage | 8 Watt |
| Incandescent Zvakaenzana | 60 Watt |
| Lamp Base | E27 |
| Chiedza Rudzi | Warm White |
| Rudzi Tembiricha | 2700 Kelvin |
| Luminous Flux | 806 Lumen |
| Voltage | 100-240 Volt |
| Frequency | 50 Hertz |
| Special Features | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Kushandisa Kwemukati/Kunze | Indoor |
| Hupenyu hurefu | 15,000 Maawa |
| Zviyero (H x W) | 12.2 x 6.25 masendimita |
| Material | Plastiki |
Warranty uye Support
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Rutsigiro rwepamhepo: Visit www.philips.com/support kuti uwane mibvunzo inowanzo bvunzwa uye sarudzo dzekutaurirana.
