EMID 128 Microchip Scanner
User Manual
Introduction
- This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading EMID, FDX-B(ISO11784/85) etc. tag.
- This scanner uses high brightness OLED display which can be seen clearly in bright light environment. It can store max 128 records of tag information with its built-in memory, users can upload the information to the computer through USB cable.
- This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc.
Parameter
| PROJECT | PARAMETER |
| WORKING FREQUENCY | 134.2Khz/125Khz |
| SUPPORT TAG | EMID、FDX-B(ISO11784/85) |
| READING/ WRITING RANGE | 2-12mm glass tube label ＞8cm 30mm animal ear mark ＞20cm (related to label performance) |
| STANDARD | ISO11784/85 |
| READING TIME | ＜100ms |
| PROMPT | 0.91 “high brightness OLED screen, buzzer |
| POWER SUPPLY | 3.7V (lithium battery) |
| MEMORY | 128 pieces of information |
| COMMUNICATION | USB2.0 |
| LANGUAGE | English or customized |
| WORKING TEMP | -10℃~50℃ |
| STORAGE TEMP | -30℃~70℃ |
| PACKAGE SIZE | 18.5cm×12cm×3cm |
| WEIGHT | 120g |
Operation
Turn on the device and scanning.
Press scan button to turn on the device and on scanning model
The tag NO. will be displayed on screen if detect a tag, display “No tag” if no tag is detected.
Device could be charged and uploaded data by USB cable.
When device is connected by USB,” USB” will be displayed at top left corner, and on charging status for battery status.
Press scann button for 3s, data will be uploaded from the scanner, MAX 128 records.
After uploading successfully, display as below
The data can be upload in real time if scanner is connected by USB cable when reading a tag.
Scanner will be off after 120s without working.
How to synchronize data to computer:
- First connect the scanner to the computer using a USB cable. (The Bluetooth version can be connected to a computer using the included black UBS wireless port).
- Open the Notepad file (TXT) on your computer.
- Press and hold the scan button of the scanner, and the chip number stored in the scanner will be synchronized to the notebook.
Regarding the microchips number stored in the scanner:
The device can store 128 microchips numbers. When more than 128 microchips are scanned, the previously stored microchips numbers will be automatically overwritten and remain at 128.
Documents / Resources
 | Smoostart EMID 128 Microchip Scanner [pdf] User Manual EMID 128 Microchip Scanner, EMID 128, Microchip Scanner, Scanner |