Smlpretty EKPL2 BLE Smart Padlock
Instructions for use
Download APP：
Searching “SmartLife” 
on stores to download and install the APP.
Create Account:
Follow instructions in app to create an account with user’s mobile phone number.
Add Device:
- Register the “SmartLife” account and log in (Need network);
- “Add Device” or click the symbol “+” in “Home” page;
- Select “Auto Scan” to start searching device;
- Click “Next “to add the key box.
Password Management:
Administrator password settings:
- Login APP– Select the device and enter the “settings” page;
- Password management;
- Add password.
Temporary password settings:
- Login APP– Select device and enter “settings” page;
- Temporary password management.
- One-time password: (Only one time to unlock)
- Add – Enter Password – Set Name – Select start/ end Time
- Periodic password: (Set multiple options)
- Add-Enter password-Set name-Select start / end time
APP Unlock:
Rapid unlock:
Login APP— Enter the device page- Long press the unlock icon.
Dynamic password unlock:
- Login APP—Enter the device page-Slide the icon to the left;
- Click the button to get the dynamic password.
Password Unlock:
- Enter the passwords;
- Press ON button.
View Records:
Login APP—Enter the device page—Click Opening Record button.
Remove Device：
(APP and the lock box MUST keep connecting)
- Press the device icon on the home page for 3 seconds;
- Click [ Remove Device] to delete.
Share Device (The receiver must have an account)
- Login APP—Enter the device page;
- Click the
symbol on the upper right corner; - Share Device.
Product Parameters
- Material: Zinc Alloy/ ABS
- Working Voltage :4.5-6 V
- Power Interface: Micro USB
- Battery Life :12+ months
- Working Temperature :-20℃~60℃
- Waterproof Rating: IPx5
Accessories:
- Lock –1 Piece
- User Manual –1 piece
- USB Cable –1 piece
Notes:
- After the lock is configured, the initial password 123456 will be invalid and needs to be modified in the password settings.
- Network connection is needed, when set password, view record, remove device.
- Once the lock is binded, only need to enable Bluetooth to unlock.
- The family members are the administrators (multiple people can be set),with all permissions to set and modify passwords, share devices, view records, etc… Other members, who join the group via invitations are ordinary users, only allow to unlock via mobile phone.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules-
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates ,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radioman technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment-
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment -The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.
FAQ
- How can I reset the administrator password?
- To reset the administrator password, login to the APP, select the device, enter the settings page, navigate to Password Management, and then add a new password.
- How do I share access to the padlock with someone else?
- To share access, login to the APP, enter the device page, click the symbol on the upper right corner, and then select Share Device. The receiver must have an account to access the shared device.
Documents / Resources
 | Smlpretty EKPL2 BLE Smart Padlock [pdf] User Manual 2AOSJ-EKPL2, 2AOSJEKPL2, EKPL2 BLE Smart Padlock, EKPL2, BLE Smart Padlock, Smart Padlock, Padlock |
