Kobalt Brushless Shear/Shrubber

Product Specifications

Recommended Blades

Package Contents

The package includes the following parts:

• A: Shrubber blade
• B: Shrubber sheath
• C: Lock-off button
• D: Trigger switch
• E: Blade release buttons
• F: Grass shear blade
• G: Shear sheath
• H: Handle

Grass Shear Blade: Can be used on grass and light weeds.

Shrubber Blade: Can be used on shrubs.

Shear Sheath / Shrubber Sheath: Protects the operator from sharp blades when the machine is not in use and prevents blades from being nicked or damaged during transport or storage.

Blade Release Buttons: Used to remove the blade.

Lock-off Button: Reduces the possibility of accidental starting.

Trigger Switch: Activates the motor and blades when depressed after the lock-off button is pushed forward.

WARNING: Inspect the tool carefully upon receipt for any damage or missing parts. Do not discard packaging until all parts are examined. Do not use the machine if any part is missing or damaged until it is repaired or replaced.

Safety Information

Please read and understand this entire manual before assembly or operation. Contact customer service for any questions.

General Warnings

• Eye Protection: Always wear safety goggles or glasses with side shields and a full-face shield when needed. Use eye protection marked to comply with ANSI Z87.1.
• Chemical Exposure: Dust from certain activities (sanding, sawing, grinding, drilling) may contain chemicals known to cause cancer or reproductive harm (e.g., lead, crystalline silica, arsenic, chromium). Reduce exposure by working in a well-ventilated area and using approved safety equipment like dust masks.
• Pacemakers: Consult a physician before use if you have electronic medical devices like pacemakers.
• Know Your Machine: Read this manual and all labels before operating. Keep the manual for future reference.
• Servicing: This machine should only be serviced by a qualified technician.

Machine Safety Symbols

• V: Volts
• Direct current
• ! (Triangle with exclamation mark): Danger, warning, or caution. Indicates attention is required for safety.
• Eye Protection Symbol: Wear eye protection.
• Rain Symbol with Slash: Do not expose to rain.
• n₀: No-load speed
• SPM: Strokes Per Minute
• Manual Symbol: To reduce the risk of injury, user must read instruction manual.
• Bystander Symbol: Keep bystanders away.
• Hand/Blade Symbol: Keep hands away from blade.

General Machine Safety Warnings

• Read all warnings, instructions, and specifications. Failure to comply may result in electric shock, fire, or serious injury.
• Save all warnings and instructions for future reference.
• The term "machine" refers to both corded and battery-operated units.

Work Area Safety

• Keep the work area clean and well lit.
• Do not operate in explosive atmospheres (flammable liquids, gases, dust).
• Keep children and bystanders away.

Electrical Safety

• Ensure plugs match outlets; never modify plugs.
• Avoid contact with grounded surfaces (pipes, radiators).
• Do not expose machines to rain or wet conditions.
• Do not abuse the cord; keep it away from heat, oil, sharp edges, or moving parts.
• Use outdoor-rated extension cords for outdoor use.
• Use a Ground Fault Circuit Interrupter (GFCI) in damp locations.

Personal Safety

• Stay alert, use common sense, and do not operate when tired or under the influence of drugs, alcohol, or medication.
• Use personal protective equipment (eye protection, dust mask, non-skid shoes, hard hat, hearing protection).
• Prevent unintentional starting: ensure the switch is OFF before connecting power or battery, or when picking up/carrying.
• Remove any adjusting keys or wrenches before starting.
• Do not overreach; maintain proper footing and balance.
• Dress properly: avoid loose clothing, jewelry, and keep hair away from moving parts.
• Use dust extraction/collection facilities if provided.
• Do not become complacent; careless actions can cause severe injury.

Machine Use and Care

• Use the correct machine for the application.
• Do not use if the switch does not operate correctly.
• Disconnect power/battery before making adjustments, changing accessories, or storing.
• Store idle machines out of reach of children and untrained users.
• Maintain machines and accessories; check for misalignment or damage.
• Keep cutting machines sharp and clean.
• Use the machine and accessories according to instructions and consider working conditions.
• Keep handles and grasping surfaces dry and clean.

Battery Machine Use and Care

• Recharge only with the specified charger.
• Use only specifically designated battery packs.
• Keep battery packs away from metal objects when not in use.
• Avoid contact with battery liquid if ejected; flush with water if contact occurs.
• Do not use damaged or modified battery packs or machines.
• Do not expose battery packs or machines to fire or excessive temperatures (above 265°F/130°C).
• Follow charging instructions and charge within the specified temperature range.

Service

• Have machine serviced by a qualified repair person using identical replacement parts.
• Never service damaged battery packs; only the manufacturer or authorized providers should do so.

Shear/Shrubber Specific Safety Warnings

• Keep body parts away from the blade. Do not remove cut material or hold material while blades are moving.
• Carry the shear/shrubber by the handle with the blade stopped and the power switch off.
• Always fit the blade cover when transporting or storing.
• When clearing jams or servicing, ensure all power switches are OFF and the battery pack is removed/disconnected.
• Hold by insulated gripping surfaces only to avoid contact with hidden wiring.
• Keep power cords and cables away from the cutting area.
• Do not use in bad weather conditions, especially during lightning risk.

Additional Safety Instructions

• Do not grasp exposed cutting blades or edges when handling.
• Keep hands away from blades.
• Do not rely solely on machine insulation against electric shock; avoid operating near live wires or cables.
• Do not charge the battery pack in rain or wet locations.
• Never allow children to operate the shear/shrubber.
• Never operate the product with people, especially children or pets, nearby.
• Avoid trimming in bad weather, especially during lightning risk.
• Use only in daylight or good artificial light.
• Check covers and guards for damage and proper fit before use.
• Switch on the motor only when hands and feet are away from the blade.
• Be careful not to injure feet or hands with the cutting means.
• Use only with listed battery packs and chargers.

Preparation

Know Your Shear/Shrubber

This shear/shrubber is designed for trimming and shaping hedges and shrubbery, and for trimming grass and light weeds. Familiarize yourself with all operating features and safety requirements before use.

WARNING: Do not become complacent due to familiarity. A moment of carelessness can cause severe injury. Always familiarize yourself with operating features and safety instructions before using any machine. Do not modify the machine or use unrecommended accessories; this is misuse and can lead to hazardous conditions.

Operating Instructions

Changing the Blade

WARNING: To prevent injury, slide the blade sheath over the blade when replacing it.

The shear/shrubber comes with two blades: a 4" grass shear blade for grass/weeds and an 8" shrubber blade for hedges. Ensure you use the correct blade for your task.

1. Remove the battery pack from the machine.
2. Ensure the blade sheath covers the blade being removed and the blade being installed.
3. Turn the machine upside down.
4. Press the two blade release buttons (E) simultaneously and pull the installed blade out of the machine housing. Ensure no dirt enters the housing.
5. Insert the narrow end of the replacement blade into the machine housing. Press the blade housing against the machine housing until it clicks audibly into place.

(Diagram 1a-1d shows the process of changing the blade, including pressing release buttons and inserting the new blade.)

Attaching/Removing Battery Pack

To Attach Battery Pack:

1. Align the raised portion on the battery pack with the grooves on the bottom of the machine.
2. Slide the battery pack onto the machine until the latches snap into place and it is secured.

NOTICE: Ensure proper alignment of the battery pack's raised rib with the machine's groove for correct latching. Improper assembly can damage internal components.

To Detach Battery Pack:

1. Press the battery-release buttons to release the pack.
2. Pull the battery pack backward to remove it.

(Diagram 2 shows the battery pack being attached/detached using release buttons.)

Starting/Stopping the Machine

To Start:

1. Grasp the handle (H) firmly.
2. Push the lock-off button (C) forward.
3. Squeeze the trigger switch (D). Release the lock-off button (C) once the machine starts.

To Stop:

1. Move the machine away from the cutting area.
2. Release the trigger switch.

WARNING: Blades continue to move for a few seconds after the switch is turned off. Wait for blades to stop completely before setting the machine down.

(Diagram 3 illustrates starting the machine with handle H, lock-off button C, and trigger switch D.)

Cutting Tips

• Never use the shear/shrubber near power lines, fencing, posts, buildings, or other immovable objects.
• Do not force the shear/shrubber through heavy grass or shrubbery; this can cause blades to bind and slow down. Reduce pace if blades slow.
• Do not cut stems or twigs thicker than 5/16" (7.9 mm) or those too large to feed into the blade. Use a hand saw or pruning saw for larger stems.
• If blades jam, stop the motor, wait for blades to stop, and remove the battery pack before clearing the obstruction.
• For level hedge cutting, use a string guide. Trim the hedge slightly narrower at the top for better exposure and uniformity.
• Wear gloves when trimming thorny or prickly growth.
• For new growth, use a wide sweeping action. For older growth, use a sawing movement.

WARNING: Clear the cutting area of objects like cords, lights, wire, or loose string that could entangle the blade and cause serious injury.

Trimming Hedges

• Trim sides first (bottom upwards), then the top.
• Trim sides so they are slightly narrower at the top.
• Use a hand saw or pruning shears for thicker branches.

(Diagram 4 illustrates hedge trimming techniques.)

Trimming Grass and Shrubs

• For long grass, work in stages from the top, making small cuts.
• For best results, cut only dry grass.
• Keep the machine away from solid objects to protect blades from excessive wear.

(Diagram 5 illustrates trimming grass and shrubs.)

Care and Maintenance

WARNING: All maintenance should be performed by a qualified service technician.

• Before cleaning or maintenance, remove the battery pack.
• Keep the machine and ventilation slots clean.
• Use only identical replacement parts for servicing.
• Wear heavy protective gloves when handling blades.
• Always wear eye protection (ANSI Z87.1 compliant) and a dust mask if dusty.
• Do not immerse the machine in water or other liquids when cleaning.
• Keep plastic parts away from brake fluids, gasoline, petroleum products, and penetrating oils, as chemicals can damage plastic.

NOTICE: Periodically inspect for damaged, missing, or loose parts. Tighten fasteners. Contact customer service if parts are missing or damaged.

Cleaning

After each use, clean debris from blades, ventilation slots, and housing with a soft brush. Wipe the machine surface with a clean cloth moistened with mild soap solution. Clean and lightly lubricate cutting blades after use.

Lubricating the Blades

WARNING: Do not lubricate while the shear/shrubber is running.

Lubricate blades before and after each use for easier operation and longer life. For extended use, lubricate during breaks.

1. Remove the battery pack.
2. Lay the shear/shrubber on a flat surface. Apply light-weight machine lubricant (not included) along the edge of the top blade.

(Diagram 6 shows lubricating the blades.)

Transporting and Storing

1. Remove the battery pack.
2. Clean the machine.
3. Always place the sheath on the cutting blades before transporting or storing.
4. Store indoors in a dry place inaccessible to children.
5. Keep away from corrosive agents like garden chemicals and de-icing salts.

(Diagram 7 shows the machine with blade sheaths for transport/storage.)

Troubleshooting

WARNING: Release trigger switch and remove battery before troubleshooting.

Warranty

This product is warranted for 5 years from the date of purchase against defects in material and workmanship for the original purchaser. The warranty does not cover damage due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts. Commercial and rental use is limited to 90 days.

If the product qualifies, return it to the place of purchase with proof of purchase for repair or replacement at no charge. This warranty grants specific legal rights, and you may have other rights that vary by state.

Lowe's Home Centers LLC.
Mooresville, NC 28117

Printed in China