User Manual for RENISHAW models including: RSP3-6 Extended Reach Probe, RSP3-6, Extended Reach Probe, Reach Probe
PodrÄczniki oraz instrukcje instalacji â do pobrania
Kullanım ve kurulum kılavuzları için karÅıdan yüklemeler
Descarga de manuales y guÃas de instalación
RSP3-6 extended reach probe Enhanced access and inspection capability with RSP3-6 The RSP3-6 provides enhanced capability for accessing deep bores and inspecting features within large parts. It is available with a range of stylus holders for applications requiring straight and cranked extensions and can be used for both touch-trigger and 2D scanning applications. The other RSP3 probes within the range (RSP3-1, -2, -3, -4) can be used for 3-axis scanning with fixed REVO head angles during measurement, providing the REVO system with 3D-scanning (X, Y, Z) with crank stylus capabilities. It also allows different lengths of styli to be used whilst maintaining optimum metrology performance. www.renishaw.com/RSP3-6 Key benefits Reach Available with straight extensions up to 800 mm from REVO's A-axis centre of rotation, and cranked extensions up to 600 mm from REVO's A-axis centre of rotation. Accuracy Scanning accuracy: Typically better than 10 µm form error (filtered) and 5 µm diameter error. Touch-trigger accuracy: Typically better than 3 µm form and diameter error. Part of the REVO 5-axis multisensor system Long extensions combined with 5-axis movements for better part access, and multi-sensor changing for increased flexibility. #renishaw Scanning of a ring gauge Form error (F) and diameter error (D) REVO A-axis centre of rotation Touch-trigger probing of a ring gauge Form error (F) and diameter error (D) EWL = effective working length EWL2 415 mm EWL2 524 mm 490 mm 600 mm EWL 348 mm EWL 456 mm EWL2 515 mm EWL 448 mm 590 mm F = 7 µm D = 3 µm F = 2 µm D = 2 µm Ø11 mm EWL2 624 mm F = 7 µm D = 3 µm F = 8 µm D = 3 µm F = 9 µm D = 3 µm 700 mm EWL 556 mm F = 2 µm D = 2 µm F = 3 µm D = 3 µm F = 3 µm D = 3 µm EWL2 724 mm 127 mm EWL 656 mm 127 mm 800 mm F = 9 µm D = 3 µm Ø5 mm F = 3 µm D = 3 µm Max 50 mm Max 50 mm Test setup criteria Stylus used CMM specification CMM controller Data filter used Artefacts used Scanning speed Touch speed Back off speed Bi-directional scans Renishaw's M2 stylus range U3 = 3.1 µm + L / 250 UCC S5 Harmonic simple cut off order = 60 UPR (undulation values) Ø45 mm (nom) calibration sphere (for the calibration) Ø50 mm (nom) ring gauge (for the ring gauge tests) 5 mm/s (for the ring gauge scan tests) 2 mm/s (for the ring gauge touch tests) 2 mm/s Bi-directional scan data is quoted to demonstrate the performance of the Renishaw probe calibration method 2 RSP3-6 extended reach probe 50.6 (1.99) 80.48 (3.17) 132 (5.20) REVO A-axis centre of rotation Ø46 (1.81) 173 (6.81) RSH3-6c-500 RSH3-6c-600 RSH3-6-600 RSH3-6-700 RSH3-6-800 EWL 348 (13.70) 361 (14.21) EWL 448 (17.64) EWL 457 (17.99) 461 (18.15) 469 (18.46) EWL 557 (21.93) EWL 657 (25.87) 569 (22.40) Dimension in mm (in) 3 669 (26.34) RSP3-6 extended reach probe Specification Probe attributes Measurement range Overtravel range Resolution Weight Mounting Crash protection Change rack options Interface options 2-axis scanning (X,Y) and 3-axis touch-trigger (X,Y,Z) ±0.5 mm deflection in all directions in all orientations X, Y: ±2 mm +Z: 1.7 mm -Z: 1.2 mm Capable of <0.1 m 300 g (10.58 oz) (excluding stylus holder and stylus) Magnetised kinematic coupling ±X, ±Y, -Z Via break out of probe or stylus holder +Z Via integral bump-stop design RCP TC-3 For probe changing only This single port unit mounts to the MRS or MRS2 RCP2 For stylus holder changing only This single port unit mounts to the MRS or MRS2 UCC S5 Effective stylus length range RSP3-6 + RSH3-6c-500 EWL 348 mm (13.70 in) RSP3-6 + RSH3-6c-600 EWL 448 mm (17.64 in) RSP3-6 + RSH3-6-600 EWL 456 mm (17.95 in) RSP3-6 + RSH3-6-700 EWL 556 mm (21.89 in) RSP3-6 + RSH3-6-800 EWL 656 mm (25.83 in) Maximum permissible stylus length vs mass RSP3-6 + RSH3-6c-500 50 mm (8 g)* RSP3-6 + RSH3-6c-600 50 mm (4.6 g)* RSP3-6 + RSH3-6-600 10 mm (3.42 g) RSP3-6 + RSH3-6-700 10 mm (3.42 g) RSP3-6 + RSH3-6-800 10 mm (3.42 g) * Includes weight of stylus centre EWL2 415 mm (16.34 in) EWL2 515 mm (20.28 in) EWL2 524 mm (20.63 in) EWL2 624 mm (24.57 in) EWL2 724 mm (28.50 in) Using M2 star centre Using 10 mm stylus www.renishaw.com/RSP3-6 +44 (0) 1453 524524 uk@renishaw.com © 20142023 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are registered trade marks of Renishaw plc. Renishaw product names, designations and the mark `apply innovation' are trade marks of Renishaw plc or its subsidiaries. Other brand, product or company names are trade marks of their respective owners. Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK. WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW. #renishaw Part no.: H-1000-2122-04-B Issued: 11.2023Adobe PDF Library 17.0 Adobe InDesign 18.5 (Windows)