HBP02 Touch Panel with Bluetooth 5.0 SIG Mesh
Fa'apipi'i ma Faatonuga Tusi Lesona
Touch Panel with 
5.0 SIG Mesh
| Faʻagasologa o taimi | 2.4 GHz - 2.483 GHz |
| Auina atu le malosiaga | 4 leBBm |
| Va'aiga (E masani i totonu) | 10 ~ 30m |
| Maliega | 5.0 SIG Mesh |
| Faʻagaioiga voltage | 220~240VAC 50/60Hz |
| Malosiaga tumau | <1.5W |
| Laveaʻi galuega | Ta: -20 0C ~ +50 0C |
| Faʻafefe faʻafefe | 20% ~ 90% |
| IP rating | IP20 |
| EMC tulaga (EMC) | EN55015, EN61000, EN61547 |
| Tulaga saogalemu (LVD) | EN60669-1/-2-1 AS/NZS60669-1/-2-1 |
| LANU MUMU | EN300328, EN301489-1/-17 |
| Fautuaina | CB, CE, EMC, MULAU, RCM |
oʻo
Faiga Fa'ainisinia & Fua
Mauga ata
Sauniuniga uaea
Si'itia clamp tigaina.
Ina ia fai pe tatala le uaea mai le mea fa'amau, fa'aoga se sikulifili e tulei i lalo le ki.
Faʻatau le App
Free App mo le fa'atulagaina ma le fa'atonuina
Web app/tulaga: iot.koolmesh.com
Faagaoioia
1 2 3 4 Scene Recall
Scenes are simply programmed using the App.
Create and name the scenes using the scenes menu, and then assign the scenes to buttons 1 2 3 4 from the device settings menu.
Senser take over
Press this button to quit manual override mode(Sensors will take over the control).
Faiga Mama
Long press this button for more than 5s to go to clean mode (during this clean mode, the touch panel screen will be locked and does not respond to any touch), it will quit automatically after 1min.
The ON/OFF button has a configurable response via the App.
Permanent OFF (Occupancy sensor disabled).
Turning off via the ON/OFF button will suspend the entire system, including the occupancy sensor.
Pressing this button again will resume the last automatic profile selected, or pressing any other button on the control panel will wake up the system.
The touch panel HBP02 can keep the time running for up to 7-8 weeks against power failure.
Touch Indications
Three methods for successful touch indications:
Vibration / Beeper / LED indicator
Users can select any one, two, or all of them to indicate successful touch on HBP02 in the App.
Real-time Sustainability
The touch panel HBP02 can keep the time running for up to 7-8 weeks against power failure.
Fa'amatalaga Faaopoopo/Pepa
- Mo le a'oa'o atili e uiga i fa'amatalaga au'ili'ili o mea/galuega, fa'amolemole va'ai i
www.hytronik.com/download ->poto ->Fa'atomuaga o Va'aiga Fa'aoga ma Galuega Fa'atino - E tusa ai ma puipuiga mo le faʻapipiʻiina ma le faʻaogaina o oloa Bluetooth, faʻamolemole faʻafeiloaʻi i
www.hytronik.com/download ->knowledge ->
Bluetooth Products – Precautions for Product Installation and Operation - Datasheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Accessories - E tusa ai ma faiga fa'amaonia masani a Hytronik, fa'amolemole va'ai i
www.hytronik.com/download ->poto ->Hytronik Standard Guarantee Policy
E mafai ona suia e aunoa ma se faʻasilasilaga.
HBP02-20210323-A0
Pepa / Punaoa
 |
HYTRONIK HBP02 Touch Panel with Bluetooth 5.0 SIG Mesh [pdf] Tusi Taiala HBP02, Touch Panel with Bluetooth 5.0 SIG Mesh |
