ASUS M5A97 LE R2.0 DDR3 AM3+ Motherboard Instruction Manual

1. Folasaga

This manual provides detailed instructions for the installation, operation, and maintenance of your ASUS M5A97 LE R2.0 motherboard. Designed for AMD AM3+ processors, this motherboard features DDR3 2133MHz memory support and ASUS's exclusive Dual Intelligent Processor technology for optimized performance and energy efficiency. Please read this manual thoroughly before proceeding with installation or operation.

2. Vaega Autu

• AMD AM3+ Socket: Supports AMD FX Series, Phenom II, Athlon II, and Sempron 100 Series processors.
• DDR3 Memory Lagolago: Up to 32GB of DDR3 2133(O.C.)/1866/1600/1333/1066 MHz memory.
• Dual Intelligent Processors: Integrates EPU (Energy Processing Unit) and TPU (TurboV Processing Unit) for real-time power management and system performance tuning.
• USB 3.0 Boost with UASP: Accelerates USB 3.0 transmission speeds by up to 170%.
• SATA 6Gb/s: Provides high-speed data transfer for storage devices.
• DirectKey: Offers easy access to BIOS when the PC is on standby.
• Feso'ota'iga iControl: Real-time bandwidth allocation control for efficient network usage.
• Windows 8 Sauni: Fa'afetaui mea mana'omia mo le lagolago a le Windows 8.

3. Seti ma Fa'apipi'i

E taua tele le faʻapipiʻiina lelei mo le faʻagaioiga mautu o lau motherboard. Mulimulitaʻi ma le faʻaeteete i laasaga nei.

3.1 Preparing the Chassis

Before installing the motherboard, ensure your PC chassis is prepared. This includes installing the I/O shield and verifying the correct placement of motherboard standoffs.

Ata 1: Fa'afagota view of the ASUS M5A97 LE R2.0 Motherboard, highlighting various components and ports.

Ata 2: Tulaga i lalo view of the ASUS M5A97 LE R2.0 Motherboard, showing the CPU socket, RAM slots, and PCIe slots.

3.2 Motherboard Installation Steps

1. Fa'apipi'i le I/O Shield: Insert the I/O shield into the rear opening of your chassis.
2. Tuu le Motherboard: Carefully align the motherboard with the standoffs in the chassis. Ensure the I/O ports align with the I/O shield.
3. Saogalemu Motherboard: Use the provided screws to secure the motherboard to the standoffs. Do not overtighten the screws to avoid damaging the PCB. Typically, 8 or 9 screws are used.
4. Fesoʻotaʻi le Mana: Fa'afeso'ota'i le 24-pin ATX power connector ma le 8-pin CPU power connector mai lau sapalai eletise i le motherboard.
5. Fa'apipi'i le PPU: Open the CPU socket lever, align the CPU with the socket (matching the golden triangle on the CPU to the triangle on the socket), gently place the CPU, and close the lever.
6. Fa'apipi'i le CPU Cooler: Mount the CPU cooler according to its manufacturer's instructions.
7. Fa'apipi'i le RAM: Insert DDR3 memory modules into the DIMM slots until they click into place. Refer to your motherboard manual for recommended slot population.
8. Fa'apipi'i Card Graphics: Insert your graphics card into the primary PCIe x16 slot and secure it with a screw.
9. Feso'ota'i Meafaigaluega Teuina: Connect SATA data cables from your storage drives to the SATA 6Gb/s ports on the motherboard.
10. Feso'ota'i uaea pito i luma: Connect the front panel USB, audio, power, and reset switch cables to the corresponding headers on the motherboard.

3.3 Visual Installation Guide

For a visual walkthrough of the motherboard installation process, please refer to the following video:

4. Fa'atonuga o Galuega

Once the motherboard is installed and all components are connected, you can proceed with operating your system.

• Ulua'i seevae: Upon the first boot, enter the BIOS/UEFI setup to configure basic system settings, including boot order, date/time, and enable XMP for memory.
• Fa'apipi'i Aveta'avale: Install all necessary drivers for the motherboard chipset, audio, LAN, and any other integrated components from the ASUS support website or the provided driver CD.
• Polokalama Fa'aoga: Utilize ASUS-exclusive software like AI Suite II for system monitoring, fan control, and performance tuning (EPU/TPU).

5. Tausiga

O le tausiga faifaipea e fesoasoani e faʻamautinoa ai le umi ma le faʻatinoina lelei o lau motherboard.

• Tumau Mama: Periodically clean dust from inside your PC case, especially from the motherboard, CPU cooler, and fan vents, using compressed air.
• BIOS Fa'afouga: Siaki le lagolago ASUS website for the latest BIOS updates. Updating the BIOS can improve system stability, compatibility, and performance.
• Fa'afouga ta'avale: Keep your motherboard drivers updated to ensure compatibility with new software and hardware.
• Su'ega Faaletino: Asiasi mai lea taimi i lea taimi le laupapa mo so'o se so'oga matala, vaega ua fa'aleagaina, po'o fa'ailoga o le vevela tele.

6. Faʻafitauli

If you encounter issues, refer to these common troubleshooting tips:

• Leai se Malosi/Leai se Fa'a:
  • Ia mautinoa o lo'o feso'ota'i uma uaea eletise (24-pin ATX, 8-pin CPU).
  • Verify the power supply is functional and switched on.
  • Siaki feso'ota'iga ki le paoa o le panel pito i luma.
• Leai se fa'aaliga:
  • Confirm the monitor is connected to the graphics card (not the motherboard I/O if using a dedicated GPU).
  • Toe fa'ae'e le kata fa'akomepiuta ma modules RAM.
  • Fa'ata'ita'i i le fa'aaogaina o le RAM e tasi i ni avanoa eseese.
• Fa'atonuga/Fa'alavelave:
  • Siaki le vevela ole PPU ma le GPU.
  • Ensure RAM is compatible and running at stable speeds (disable XMP/DOCP for testing).
  • Fa'afou le BIOS ma aveta'avale.
• Fa'afitauli Fa'apitoa:
  • Verify peripheral drivers are installed and up to date.
  • Fa'ata'ita'i mea fa'aopoopo i uafu USB eseese.

7. Fa'amatalaga

8. Fa'amaonia ma Lagolago

This product is factory re-certified by ASUS. For specific warranty terms and conditions, please refer to the official ASUS website or contact ASUS customer support. Keep your proof of purchase for warranty claims.

For further assistance, visit the official ASUS support page: ASUS Lagolago

9. Oloa Ua Ovaview Vitio

Mo se fa'aupuga lauteleview of the product, please watch the following video: