Bietrun 2000W Pure Sine Wave Inverter User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your Bietrun 2000W Pure Sine Wave Inverter. Please read it thoroughly before installation and use, and retain it for future reference.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• 1 x Bietrun 2000W Pure Sine Wave Inverter
• 2 x 10AWG 3-foot Battery Cables (Red and Black)
• 1 x ozemljitveni kabel
• 1 x daljinski upravljalnik
• 4 x varovalke
• 1 x Small Wrench
• Montažni vijaki

Image 1.1: The Bietrun 2000W Pure Sine Wave Inverter with its remote control, battery cables, ground cable, fuses, and wrench.

2. Varnostna navodila

Observe the following safety precautions to prevent injury and damage to the inverter or connected devices:

• Ne odpirajte pretvornika casing. V notranjosti ni delov, ki bi jih lahko uporabnik servisiral.
• Zagotovite ustrezno prezračevanje okoli razsmernika. Ne blokirajte hladilnih odprtin.
• Keep the inverter away from water, moisture, flammable materials, and direct sunlight.
• Connect the inverter only to a 12V DC power source. Connecting to other voltaglahko povzroči škodo.
• Ensure correct polarity when connecting battery cables (Red to Positive, Black to Negative). Reverse polarity will cause damage.
• Always connect the ground cable to a proper earth ground.
• Do not exceed the inverter's rated continuous power output (2000W) or peak surge power (4000W).
• Pred kakršnim koli vzdrževanjem ali čiščenjem odklopite pretvornik iz akumulatorja.

Integrirane zaščitne funkcije

The inverter includes multiple protection mechanisms:

• Zaščita pred preobremenitvijo
• Nizka glasnosttage Zaščita
• Zaščita GFCI
• Overvoltage Zaščita
• Zaščita pred previsoko temperaturo
• Zaščita pred kratkim stikom
• Zaščita pred povratno povezavo
• Prenapetostna zaščita

Image 2.1: Visual representation of the inverter's comprehensive safety protection system.

3. Značilnosti izdelka

The Bietrun 2000W Pure Sine Wave Inverter is designed for reliable power conversion with advanced features:

• Čisti sinusni izhod: Provides high-quality AC power (THD < 3%) suitable for sensitive electronics, ensuring stable operation and minimizing damage risk.
• Visoka učinkovitost: Conversion efficiency exceeding 90% reduces energy loss.
• Neprekinjena moč: Delivers 2000W continuous power with a 4000W peak surge capacity.
• Vsestranski izhod: Features 4 AC outlets, 1 AC wiring terminal, 2 USB ports (5V/2.1A), and 1 Type-C port (5V/2.1A).
• HD LED zaslon: Provides real-time status updates including input/output voltage, charging status, battery status, current power, and fault codes.
• Daljinski upravljalnik: Allows for convenient power management from a distance.
• Tiho delovanje: High-efficiency cooling system with a low-noise fan maintains optimal operating temperature.
• Kompakten in vzdržljiv dizajn: Encased in rugged Aluminum Alloy, with dimensions of 19 x 10 x 7 inches and a weight of 12.5 lbs.

Image 3.1: Key features of the Bietrun 2000W Pure Sine Wave Inverter.

Image 3.2: Illustrates the stable, grid-like output of a pure sine wave inverter compared to unstable power from other types.

4. Nastavitev in namestitev

Lokacija in montaža

Choose a dry, well-ventilated location away from direct sunlight, heat sources, and flammable materials. The inverter can be wall-mounted using the provided screws.

Združljivost baterij

The inverter is compatible with various 12V battery types, including LiFePO4, LI, SLD, GEL, FLD, and AGM batteries.

Image 4.1: The inverter supports multiple 12V battery chemistries.

Koraki povezave

1. Pripravite kable: Use the provided 10AWG 3-foot cables. Ensure all connections are secure.
2. Connect Ground Cable: Attach the green/yellow ground cable to the inverter's ground terminal and to a reliable earth ground point.
3. Priključite kable akumulatorja:
   • Povežite rdeča kabel baterije do razsmernika pozitivno (+) terminal.
   • Povežite črna kabel baterije do razsmernika negativno (-) terminal.
   • Povežite drugi konec rdeča cable to the battery's pozitivno (+) terminal.
   • Povežite drugi konec črna cable to the battery's negativno (-) terminal.

   Pomembno: Ensure correct polarity. A spark may occur during the final connection, which is normal due to capacitor charging.
4. Varne povezave: Double-check all connections for tightness to prevent loose contacts and overheating.

Image 4.2: Basic wiring diagram for connecting the inverter to a 12V battery.

Inverter Interface Overview

Image 4.3: Front panel layout with output interfaces and controls.

Image 4.4: Rear panel layout with battery input terminals and cooling fans.

5. Delovanje

Vklop/izklop

• Ročno delovanje: Flip the ON/OFF switch on the inverter to the 'ON' position to power on. Flip to 'OFF' to power off.
• Daljinsko upravljanje: Ensure the inverter's 'REMOTE' switch is in the 'ON' position. Use the ON/OFF buttons on the remote control to operate the inverter.

Image 5.1: The remote control allows for convenient operation.

Povezovanje naprav

Once the inverter is powered on, plug your AC devices into the AC outlets or connect to the AC wiring terminal. USB devices can be connected to the USB or Type-C ports.

Ensure the total power consumption of all connected devices does not exceed 2000W continuously.

6. HD Display Information

The integrated HD display provides real-time operational data and fault indications:

• Vnos: Prikaže volumen baterijetage (BT) and internal temperature (T).
• Izhod: Shows output frequency (Hz), AC voltage (AC), and current power consumption (P).
• Stanje baterije: Visual indicator of battery charge level.
• Valovna oblika: Indicates pure sine wave output.
• Kode napak: Numeric codes appear for specific issues, aiding in troubleshooting.

Image 6.1: The HD display provides comprehensive status updates and fault codes.

Opisi kod napak

• 2: Nizka glasnosttage Opozorilo
• 3: Overvoltage Zaščita
• 4: Nizka glasnosttage Zaščita
• 5: Opozorilo o preobremenitvi
• 6: Zaščita pred preobremenitvijo
• 7: Zaščita pred previsoko temperaturo
• 8: Izhodna zaščita pred kratkim stikom

7. Odpravljanje težav

If the inverter is not functioning correctly, refer to the display for fault codes and consult the table below:

If the fault persists after attempting the solutions, contact customer support.

8. Specifikacije

9. Vzdrževanje

Redno vzdrževanje zagotavlja optimalno delovanje in dolgo življenjsko dobo vašega pretvornika:

• Čiščenje: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure cooling vents are free from dust and debris. Do not use liquid cleaners.
• Preverjanje povezave: Redno preverjajte tesnost in morebitno korozijo priključkov akumulatorskih kablov. Morebitno korozijo očistite z žično krtačo in raztopino sode bikarbone.
• Prezračevanje: Ensure the inverter always has adequate airflow. Do not operate in enclosed spaces without ventilation.
• Zamenjava varovalke: If a fuse blows, replace it only with a fuse of the same type and rating as specified in the package contents.

10. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Bietrun webspletno mesto. Shranite račun kot dokazilo o nakupu.