DTAPE DT50

Uporabniški priročnik za laserski merilnik DTAPE

Model: DT50 GEN2

Brand: DTAPE

Uvod

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

Kaj je vključeno

  • ACPOTEL 165 Ft Laser Measuring Device
  • 1.5V AAA Batteries
  • Prenosna torba
  • Uporabniški priročnik (ta dokument)
  • Ročni trak
  • Paketna škatla

Nastavitev

Namestitev baterije

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

DTAPE Laser Measure with batteries, portable bag, and hand strap

Figure 1: DTAPE Laser Measure and included accessories.

Vklop/izklop

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

Navodila za uporabo

Basic Distance Measurement

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

DTAPE Laser Measure displaying distance measurement

Figure 2: The ultra-HD LCD display showing measurement results.

Pretvorba enot

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

DTAPE Laser Measure showing unit conversion options

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

Referenčna točka merjenja

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

DTAPE Laser Measure showing front and back reference points

Figure 4: Switching between front and back measurement reference points.

Več načinov merjenja

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

  • Razdalja: Single point-to-point measurement.
  • območje: Calculates the area of a surface (length x width).
  • obseg: Calculates the volume of a space (length x width x height).
  • Pitagora: Indirect measurement using the Pythagorean theorem (single or double).
  • Neprekinjeno merjenje: Real-time tracking of distance as the device is moved.
  • Seštevanje/odštevanje: Add or subtract measurements.
  • Shranjevanje podatkov: Stores historical measurement data.
DTAPE Laser Measure showing various measurement modes

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

Video 1: An official product video demonstrating the features and usage of the DT50 Laser Distance Meter, including various measurement modes and applications.

Vzdrževanje

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

  • Napravo vzdržujte čisto tako, da jo obrišete z mehko, suho krpo.
  • Naprave ne izpostavljajte ekstremnim temperaturam ali neposredni sončni svetlobi za daljša obdobja.
  • Ko naprave ne uporabljate, jo shranite v prenosno torbico, da jo zaščitite pred prahom in udarci.
  • Če naprave ne boste uporabljali dlje časa, odstranite baterije, da preprečite puščanje.

Odpravljanje težav

If you encounter issues with your DTAPE Laser Measure, consider the following:

  • Naprava se ne vklopi: Preverite namestitev baterij in se prepričajte, da niso izpraznjene. Po potrebi jih zamenjajte.
  • Netočne meritve: Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
  • Laser ni viden: In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.

For persistent issues, refer to the detailed user manual included in the package or contact customer support.

Specifikacije

FunkcijaPodrobnost
ZnamkaDTAPE
ModelDT50 GEN2
Natančnost±1/16 palca
Merilno območje165 čevljev
Hitrost odziva0.4 sekund
Zaslon2" Ultra-HD LCD
Ocena IPIP54 (odporno na vodo in prah)
Vir napajanja1.5V AAA Batteries
MaterialAkrilonitril butadien stiren
Teža predmeta7 unč

Garancija in podpora

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL webmesto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.