1. Pomembne varnostne informacije
Always read and understand all safety warnings and instructions before operating this welding machine. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Električni udar lahko ubije: Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the workpiece is properly grounded.
- Hlapi in plini so lahko nevarni: Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases away from your breathing zone and the general area.
- Obločni žarki lahko opečejo oči in kožo: Za zaščito oči in obraza nosite varilsko čelado z ustrezno zatemnitvijo filtrirne leče. Za zaščito kože nosite ustrezna zaščitna oblačila.
- Nevarnost požara in eksplozije: Remove all flammables from the welding area. Have a fire extinguisher nearby.
- Vroči deli lahko povzročijo hude opekline: Allow hot parts to cool before handling. Do not touch hot metal with bare hands.
- Magnetna polja lahko vplivajo na srčne spodbujevalnike: Pacemaker wearers should consult their doctor before operating this equipment.
Keep children away from the welding area. Do not allow untrained personnel to operate the machine.
2. Izdelek je končanview
The GZ GUOZHI MIG-135LCD is a versatile 2-in-1 semi-automatic welding machine designed for both arc welding (MMA) and non-gas wire welding (MIG). It features inverter control for stable performance and a digital display for precise adjustments.
Ključne značilnosti:
- 2-in-1 Multi-functional: Supports Arc Welding (MMA) and Non-Gas Wire Welding (MIG). Suitable for various base materials including cast iron, mild steel, and stainless steel.
- Invertersko krmiljenje: Advanced inverter technology ensures smooth arc ignition, minimal spatter, and high-quality welds. Uses flux-cored wire, eliminating the need for shielding gas.
- Dvojni digitalni zaslon: Clear digital display for both current and voltage, allowing for precise and independent adjustment via dials. Optimize power for different wire diameters, metal types, and thicknesses.
- Začetnikom prijazno: Equipped with a "Hot Start" function for quick arc ignition, making it easy for new users to operate.
- Celovita zaščita: Features overheat protection, overcurrent protection, and overload protection for enhanced safety and durability. Integrated forced air cooling fan prevents heat-related malfunctions.
- Prenosna zasnova: Weighing approximately 4.54kg, this compact and lightweight machine is easy to carry and suitable for home use and various DIY projects.
Sestavni deli izdelka:
The package includes the main welding unit, an electrode holder, an earth clamp, and a torch cord.
Figure 2.1: GZ GUOZHI MIG-135LCD Welder showing MIG and MMA configurations.
Slika 2.2: Podrobno view of the digital display and control panel.
Figure 2.3: The GZ GUOZHI MIG-135LCD welding machine with its standard accessories, including electrode holder, earth clamp, and torch.
3. Navodila za nastavitev
3.1 Wire Installation (for MIG Welding)
- Open the side cover of the welding machine.
- Remove the butterfly nut from the wire tray spindle.
- Place the flux-cored wire spool onto the spindle, ensuring it rotates freely.
- Secure the wire spool with the butterfly nut.
- Lift the retainer arm of the wire feeder mechanism.
- Feed the wire through the guide roller and into the conduit, ensuring it is straight and not bent.
- Lower the retainer arm and adjust the tension knob to lightly secure the wire.
- Zaprite stranski pokrov.
Figure 3.1: Proper installation of the flux-cored wire spool and feeding the wire through the mechanism.
Video 3.1: Demonstration of wire installation and setup for MIG welding mode on a similar semi-automatic welder. This video shows how to correctly load the welding wire and prepare the machine for operation.
Video 3.2: A visual guide to installing the welding wire and setting up the wire feed mechanism for a semi-automatic welder. This process is crucial for proper MIG welding.
3.2 Priključitev dodatne opreme
- Connect the MIG torch to the designated port on the front panel. Ensure it is securely inserted and rotated to lock.
- Priključite ozemljitev klamp cable to the negative (-) terminal on the front panel. Attach the earth clamp varno pritrdite na obdelovanec.
- For MMA welding, connect the electrode holder cable to the positive (+) terminal and the earth clamp kabel na negativni (-) pol.
Video 3.3: This video demonstrates the connection method for the MIG torch and earth clamp to the welding machine. Proper connection is essential for safe and effective welding.
Video 3.4: A quick guide on connecting the welding accessories, including the MIG torch and ground clamp, to the welding unit. This ensures the machine is ready for operation.
3.3 Napajalni priključek
Connect the power cord to a suitable 100V power outlet. The machine supports 100V operation. Ensure the power switch on the rear panel is in the "OFF" position before connecting to power.
Figure 3.2: The compact size and lightweight design of the GZ GUOZHI MIG-135LCD, highlighting its portability for various work environments.
4. Navodila za uporabo
4.1 Izbira načina varjenja
Turn on the power switch. Use the mode selection button on the front panel to switch between MIG and MMA welding modes. The digital display will show the selected mode and allow for current/voltage prilagoditve.
Figure 4.1: The digital display allows for easy selection of welding modes and precise adjustment of parameters.
4.2 MIG Welding (Non-Gas Wire)
- Ensure the wire is correctly installed and the MIG torch is connected.
- Select "MIG" mode on the control panel.
- Prilagodite tok in voltage using the dials according to the material thickness and wire diameter. The digital display provides real-time feedback.
- Press the torch trigger to start welding. The machine's inverter control ensures a stable arc and minimal spatter.
Video 4.1: This video demonstrates the MIG welding process using a similar 3-in-1 welding machine. It shows the setup, parameter adjustment, and actual welding operation, highlighting the smooth arc and minimal spatter.
Video 4.2: A detailed demonstration of how to use the MIG mode on a semi-automatic welder. It covers the steps from wire feeding to adjusting current and voltage for optimal welding results.
Video 4.3: This video illustrates the semi-automatic welding process, focusing on the inverter technology that provides stable current and reduces spatter, leading to cleaner welds.
4.3 MMA (Arc) Welding
- Povežite držalo elektrode in ozemljitev klamp kot je opisano v poglavju 3.2.
- Select "MMA" mode on the control panel.
- Adjust the welding current using the dial based on the electrode type and material thickness.
- Strike the arc on the workpiece. The "Hot Start" function assists in quick arc ignition.
Figure 4.2: The GZ GUOZHI MIG-135LCD configured for MMA (Arc) welding, demonstrating its dual functionality.
4.4 Prilagajanje nastavitev
The machine features separate dials for current and voltage adjustment, allowing for fine-tuning of welding parameters. Refer to welding charts for recommended settings based on material type and thickness.
Figure 4.3: Close-up of the control panel showing the digital display and adjustment dials for precise control over welding parameters.
5. Vzdrževanje
- Redno čiščenje: Keep the machine clean and free from dust and debris. Use compressed air to clean the cooling vents periodically.
- Preverite kable in povezave: Regularly inspect all cables, connections, and the torch for wear, damage, or loose connections. Replace damaged parts immediately.
- Wire Feeder Maintenance: Clean the wire feeder rollers and guides to ensure smooth wire feeding. Check for any blockages in the torch liner.
- Shranjevanje: Store the welding machine in a dry, clean environment when not in use.
Figure 5.1: The internal forced air cooling fan helps maintain optimal operating temperature and prevents overheating, contributing to the machine's longevity.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Na stroju ni električne energije | Napajalni kabel ni priključen, stikalo za napajanje je izklopljeno, odklopnik je sprožil. | Check power cord, turn on switch, reset circuit breaker. |
| No arc ignition (MMA) | Poor ground connection, incorrect current setting, wet electrode. | Ensure good ground contact, adjust current, use dry electrodes. |
| Žica se ne podaja (MIG) | Wire tangled, tension too loose/tight, clogged torch liner, incorrect guide roller. | Check wire spool, adjust tension, clean liner, ensure correct guide roller (0.8mm/1.0mm). |
| Prekomerno brizganje | Nepravilna voltage/current, improper stick-out, dirty workpiece. | Adjust settings, maintain proper stick-out, clean workpiece. |
| Indikator pregrevanja je vklopljen | Machine overheated due to prolonged use or blocked vents. | Allow machine to cool down. Ensure vents are clear. Reduce duty cycle. |
7. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Znamka | GZ GUOZHI |
| Model | MIG-135LCD |
| Dimenzije izdelka | 33.1 x 14.8 x 23.4 cm |
| Telesna teža | Pribl. 4.54 kg |
| barva | Črna |
| Načini varjenja | MMA (Arc Welding), MIG (Non-Gas Wire Welding) |
| Nazivna vhodna voltage | 100V (for both MMA and MIG) |
| Rated Input Current (MMA) | 75A |
| Rated Input Current (MIG) | 100A |
| Nazivna frekvenca | 50/60 Hz |
| Rated Input (KVA) (MMA) | 2.8 |
| Rated Input (KVA) (MIG) | 3.1 |
| Rated Output Current (MMA) | 40-75A |
| Rated Output Current (MIG) | 40-100A |
| Razpon izhodnega toka | 40-135A |
| Največja vol. brez obremenitvetage | 65 V |
| Nazivni cikel delovne sile | 60 % |
| Metoda hlajenja | Prisilno zračno hlajenje |
| Priloženi dodatki | Electrode holder, Earth clamp, Torch cord |
8. Garancija in podpora
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official GZ GUOZHI webspletno mesto. Shranite račun kot dokazilo o nakupu.