Uporabniški priročnik za pametne zadnje zavorne luči EBUYFIRE

Uvod

Thank you for choosing the EBUYFIRE Smart Brake Taillight. This manual provides detailed instructions for the proper use, installation, and maintenance of your new bike light. Designed for enhanced cycling safety, this taillight features smart brake sensing, multiple operating modes, and a durable, all-weather design. Please read this manual thoroughly before use to ensure optimal performance and safety.

Varnostne informacije

• Ensure the taillight is securely mounted before each ride.
• Do not look directly into the LED light when it is on, as it may cause temporary vision impairment.
• Napravo hranite stran od ekstremnih temperatur in neposredne sončne svetlobe dlje časa.
• While the light is IPX5 waterproof, avoid submerging it in water.
• Regularly check the battery level and charge as needed to ensure continuous operation during rides.

Vsebina paketa

• Bike Taillight x 1
• Saddle Bracket x 1
• Seatpost Bracket x 1
• USB polnilni kabel x 1
• Ključ x 1

Konec izdelkaview

Slika 1: EBUYFIRE Smart Brake Taillight, showing its compact design and bright red LED array.

Slika 2: Key features of the Smart Brake Rear Light, including Move to Start, Smart Sensing Braking, USB Charging, IPX4 Waterproofing, 800mAh battery, and lightweight design.

Slika 3: Eksplodiral view illustrating the internal components: back cover, Type-C charging port, aluminum alloy casing, and 3014 LED light source.

Nastavitev

Charging the Taillight

Before first use, fully charge the taillight. Connect the provided USB charging cable to the Type-C port on the light and to a USB power source (e.g., computer, wall adapter, power bank). The charging indicator will flash green while charging and become stable green when fully charged.

Slika 4: Diagram showing the USB Type-C charging port and charging indicator behavior. A full charge provides up to 35 hours of runtime in highlight mode.

Montaža zadnje luči

The EBUYFIRE taillight comes with two mounting options: a saddle bracket and a seatpost bracket. Choose the one that best suits your bicycle.

Slika 5: Step-by-step guide for installing the taillight using both the seatpost and saddle bracket options. The light slides easily into the square mounting point.

1. Seatpost Mount: Attach the silicone strap to the seatpost, fasten it securely, and then slide the light onto the base until it clicks into place.
2. Saddle Mount: Place the seat bracket below the seat, use cable ties to fix the bracket on the seat rail track, and then slide the light onto the base until it clicks into place.

Načini delovanja

The taillight features two main operating modes: Normal Mode and Intelligent Mode. Both modes include various running light patterns and smart brake sensing.

Preklapljanje načinov

• To switch between running light patterns within a mode: En klik gumba za vklop.
• To turn OFF the light: Dvokliknite gumb za vklop.
• To switch between Normal Mode and Intelligent Mode: When the light is OFF, hold down the power button.

Pametne funkcije

Pametno zaznavanje zaviranja

The taillight is equipped with smart sensor technology. When you slow down or brake, the light automatically activates a high-intensity flash for 5 seconds, alerting riders and drivers behind you for enhanced safety. This feature is active in all operating modes.

Slika 6: Illustration of the brake sensing feature, where the light intensifies upon deceleration.

Auto On/Off (Intelligent Mode Only)

In Intelligent Mode, the light automatically turns off after 30 seconds of inactivity (when the bike is still). Once movement is detected or your bike is in motion, the light automatically reignites. For continuous daytime visibility, Normal Mode is recommended as it keeps the light constantly on when not braking.

Slika 7: Depiction of the vibration sensing feature: the light enters sleep mode after 30 seconds of stillness and wakes up automatically upon detecting movement.

Vzdrževanje

• Čiščenje: Obrišite luč z mehko damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Hidroizolacija: The light has an IPX5 waterproof rating, meaning it is protected against low-pressure water jets from any direction. Ensure the charging port cover is securely closed to maintain water resistance. Two additional gaskets are provided for the back cover in case the installed gasket wears down or is lost.
• Vzdrževanje baterije: For optimal battery life, charge the light every three months if not in regular use. Avoid completely draining the battery frequently.
• Shranjevanje: Ko svetilke dlje časa ne uporabljate, jo shranite na hladnem in suhem mestu.

Slika 8: The taillight demonstrating its IPX5 waterproof rating, indicating it is well-sealed and suitable for daily use in rainy conditions.

Odpravljanje težav

Specifikacije

Garancija in podpora

The EBUYFIRE Smart Brake Taillight comes with a 1-letna garancija proizvajalca od datuma nakupa. Ta garancija pokriva napake v materialu in izdelavi pri normalni uporabi.

For warranty claims, technical support, or any questions regarding your product, please contact EBUYFIRE customer service through the retailer where you purchased the product or visit the official EBUYFIRE store on Amazon:

Visit the EBUYFIRE Store on Amazon

Ko se obrnete na podporo, imejte pripravljen račun za nakup in podatke o modelu izdelka.