DANOPLUS WBGT + HI Heat Stress Meter KB0296 Instruction Manual

1. Uvod

The DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296) is a portable device designed to measure and monitor heat stress levels in various environments. It provides simultaneous readings for Wet Bulb Globe Temperature (WBGT), Heat Index (HI), Air Temperature, and Relative Humidity (RH). This manual provides essential information for the proper setup, operation, and maintenance of your device.

Image 1: The DANOPLUS WBGT + HI Heat Stress Meter, a 2-in-1 device for measuring heat stress.

Ključne značilnosti:

• Simultaneous display of WBGT, HI, Air Temperature, and Relative Humidity.
• Switchable IN/OUT mode for indoor and outdoor measurements.
• Programmable buzzer and red LED danger zone warning.
• Adjustable audible alarm volume (75dB / 60dB / mute).
• Adjustable alarm threshold.
• Indikator prazne baterije.
• Direct radiation effect measurement with ABS black globe.
• Wearable design with included arm strap and tripod mountable option.

2. Vsebina paketa

Ob prejemu preverite vsebino paketa, da se prepričate, da so vsi predmeti prisotni in nepoškodovani:

• 1 x DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296)
• 2 x zaponke
• 1 x Arm Strap
• 2 x AAA baterije
• 1 x angleški priročnik za uporabo

Image 2: The DANOPLUS WBGT + HI Heat Stress Meter with its packaging and included accessories.

3. Varnostne informacije

• Pred uporabo naprave natančno preberite ta priročnik.
• Naprave ne izpostavljajte ekstremnim temperaturam, neposredni sončni svetlobi dlje časa ali visoki vlažnosti.
• Izogibajte se padcem naprave in je ne izpostavljajte močnim udarcem.
• Naprave ne poskušajte razstavljati ali spreminjati. S tem boste razveljavili garancijo.
• Napravo hranite izven dosega otrok.
• Izrabljene baterije zavrzite v skladu z lokalnimi predpisi.

4. Nastavitev

4.1 Namestitev baterije

1. Poiščite pokrov predalčka za baterije na zadnji strani naprave.
2. Potisnite ali odpnite pokrov, da odprete predal.
3. Vstavite dve bateriji AAA in pazite na pravilno polarnost (+/-).
4. Varno namestite pokrov prostora za baterije.

4.2 Začetni vklop

Pritisnite in držite POWER/SET button to turn on the device. The display will illuminate and show the current readings.

4.3 Možnosti namestitve

The device offers flexible mounting for various applications:

• Wearable Strap: Attach the arm strap using the provided buckles to wear the device on your arm for personal monitoring.
• Montaža na stojalo: The device has a standard tripod screw hole for mounting on a tripod (tripod not included).
• Stenski nosilec: Use the integrated slots on the back of the device to hang it on a wall or other vertical surface.

Image 3: The DANOPLUS WBGT + HI Heat Stress Meter demonstrating its three usage modes: wearable, tripod-mounted, and wall-mounted.

5. Delovanje

5.1 Razumevanje zaslona

The digital display shows the following measurements:

• WBGT: Wet Bulb Globe Temperature.
• HI: Toplotni indeks.
• TEMP: Temperatura zraka.
• VLAGA: Relativna vlažnost.

The display also indicates the current mode (IN/OUT) and alarm status.

5.2 Switching IN/OUT Mode

Pritisnite NAČIN button (usually indicated by an arrow or 'IN/OUT' symbol) to toggle between indoor (IN) and outdoor (OUT) measurement modes. The appropriate icon will appear on the display.

5.3 Nastavitev pragov alarma

1. Pritisnite in držite NASTAVI button until the alarm threshold value starts flashing.
2. Uporabite UP in DOL arrow buttons to adjust the desired WBGT or HI alarm threshold.
3. Pritisnite NASTAVI again to confirm and move to the next setting, or wait for the display to return to normal operation.

5.4 Prilagajanje glasnosti alarma

The device features an adjustable audible alarm. Press the GLASNOST button (if available, or cycle through settings with NASTAVI) to switch between 75dB, 60dB, or mute. A visual indicator on the display will confirm the selected volume level.

Image 4: The device offers adjustable alarm volume settings for 75dB, 60dB, or mute.

5.5 Interpreting Danger Zone Indicators

The meter provides visual and audible warnings when heat stress levels exceed predefined thresholds. A red LED will flash, and the buzzer will sound when the measured value is over the alarm threshold. The display also shows specific danger level indicators:

• Pozor: WBGT: 26.7 ~ 29.4 °C (80 ~ 84.9 °F) / HI: 27 ~ 31.9 °C (80.6 ~ 89.4 °F)
• Izredno previdno: WBGT: 29.4 ~ 31 °C (85 ~ 87.9 °F) / HI: 32 ~ 40.9 °C (89 ~ 105.6 °F)
• Nevarnost: WBGT: 31 ~ 32.2 °C (88 ~ 89.9 °F) / HI: 41 ~ 53.9 °C (105.7 ~ 129 °F)
• Extreme Danger: WBGT: > 32.2 °C (> 90 °F) / HI: ≥ 54 °C (> 129 °F)

Slika 5: Primeramples of the danger zone indicators on the display, showing WBGT and Heat Index thresholds.

Image 6: The red LED alarm light indicates when measured heat stress values exceed the set threshold.

6. Vzdrževanje

6.1 Čiščenje

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the device openings.

6.2 Zamenjava baterije

When the low battery indicator appears on the display, replace the AAA batteries as described in Section 4.1. Remove batteries if the device will not be used for an extended period.

6.3 Shranjevanje

Napravo shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur. Ko je ne uporabljate, jo hranite v originalni embalaži ali zaščitnem etuiju.

7. Odpravljanje težav

8. Specifikacije

9. Garancija in podpora

DANOPLUS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official DANOPLUS webspletnega mesta. Prosimo, shranite dokazilo o nakupu za morebitne garancijske zahtevke.