1. Varnostna navodila
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Električna varnost: Ensure the power supply is disconnected before installation, maintenance, or cleaning. Only use the provided UL listed transformer/power supply.
- voltage: This product operates on 12V DC. Do not connect directly to 120V AC mains power.
- Samo notranja uporaba: These puck lights are designed for indoor applications. Do not expose to moisture or outdoor elements.
- Pravilna namestitev: Follow all installation steps precisely. If you are unsure about electrical wiring, consult a qualified electrician.
- Odvajanje toplote: Ensure adequate ventilation around the lights to prevent overheating. Do not cover the lights with insulating material.
2. Vsebina paketa
Preverite, ali so v paketu prisotne vse komponente:
- 6 x LED luči za ploščke
- 1 x UL Listed Transformer/Power Supply
- 1 x Hub (splitter for connecting multiple lights)
- 6 x podaljški
- 1 x vrtljivo zatemnilno stikalo
Image: Package contents including puck lights, power supply, hub, and dimmer.
Slika: Podrobna view of product dimensions and a visual list of included items.
3. Nastavitev
This section outlines the basic connection of the components before installation.
- Connect the power supply (transformer) to the rotary dimmer switch.
- Connect the output of the rotary dimmer switch to the input of the hub.
- Connect the extension cables to the output ports of the hub.
- Connect each LED puck light to an available extension cable.
- Once all connections are made, plug the power supply into a standard wall outlet.
Video: Demonstration of connecting the recessed LED puck lights and testing the dimming function.
Slika: nprample of the plug-and-play setup for the puck lights.
4. Namestitev
LAMPAOUS P-50 puck lights are designed for recessed mounting.
- Določite lokacijo: Choose the desired locations for your puck lights under cabinets, shelves, or in display cases. Ensure there is sufficient space behind the mounting surface for the light fixture and wiring.
- Izrez Marka: Using a pencil, mark the center of each desired light location. The recommended cutout hole size is between Φ 2-2/5'' (60mm) in Φ 2-1/2'' (63.5mm).
- Vrtanje lukenj: Carefully drill the cutout holes using an appropriate hole saw.
- Ožičenje poti: Feed the extension cables through the drilled holes.
- Vstavite luči: Connect the puck light to its respective extension cable. Gently press the puck light into the punched hole until the spring clips secure it in place.
- Varni kabli: Use cable clips or ties to neatly secure any excess wiring.
Image: Recessed installation diagram with cutout dimensions.
5. Navodila za uporabo
LAMPAOUS P-50 puck lights feature a rotary dimmer switch for brightness control.
- Vklop/izklop: Turn the rotary knob clockwise until you hear a click to power on the lights. Turn counter-clockwise until you hear a click to power off.
- Prilagodi svetlost: Once powered on, rotate the knob clockwise to increase brightness (up to 100%) and counter-clockwise to decrease brightness (down to 0%).
- Funkcija pomnilnika: The dimmer switch will remember the last brightness setting used when the lights are turned on again.
Image: Visual guide to adjusting brightness with the dimmer switch.
Image: Illustration of the 0-100% brightness dimming capability.
6. Vzdrževanje
Te LED luči v obliki ploščka zahtevajo minimalno vzdrževanje.
- Čiščenje: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the lights. Do not use abrasive cleaners or solvents.
- Življenjska doba LED: The integrated LED chips are designed for long-term use and do not require bulb replacement.
- Pregled ožičenja: Periodically check all wiring connections to ensure they are secure and undamaged.
7. Odpravljanje težav
If you encounter issues with your LAMPAOUS P-50 puck lights, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luči se ne prižgejo. | No power, loose connection, faulty power supply/dimmer. | Check if the power supply is plugged in and the outlet is functional. Ensure all cables are securely connected. Test the power supply and dimmer if possible. |
| Luči utripajo ali se neenakomerno zatemnijo. | Loose connection, incompatible dimmer (if not using included), faulty component. | Verify all connections. Ensure you are using the provided rotary dimmer. If flickering persists, contact customer support. |
| Samo nekatere luči delujejo. | Faulty puck light, loose connection to the hub or extension cable. | Check the connections for the non-working lights. Try swapping a non-working light with a working one to identify if the light itself or the connection is the issue. |
| Lights have a delayed turn-on. | Normal operation for some LED drivers. | A slight delay (less than 1 second) can be normal for some LED systems. If the delay is significant or inconsistent, check connections. |
8. Specifikacije
Key technical details for the LAMPAOUS P-50 LED Puck Lights:
- Znamka: LAMPAOUS
- Številka modela: P-50
- Vir svetlobe: LED
- Število luči: 6 na paket
- Wattage: 2 watts per light, 12 watts total
- Svetlost: 160 lumens per light, 960 lumens total
- Barvna temperatura: 3000K Warm White (other variants available)
- voltage: 12 voltov DC
- Nadzorna metoda: Rotacijsko stikalo za zatemnitev
- Material: Aluminij, polikarbonat
- Končaj: Brushed Metallic Grey
- Vrsta pritrditve: Vgradni nosilec
- Premer izreza: Φ 2-2/5'' (60mm) - Φ 2-1/2'' (63.5mm)
- Mere predmeta (D x Š x V): 1.08"L x 2.17"W x 0.79"H (per puck light)
- Teža: 1.5 funtov (celoten paket)
- Stopnja vodoodpornosti: Not Water Resistant (Indoor Use Only)
Image: Comparison of available color temperatures (this model is 3000K Warm White).
9. Garancija in podpora
For warranty information and customer support, please refer to your purchase documentation or contact LAMPAOUS directly through their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen.
LAMPAOUS is committed to providing efficient, energy-saving, healthy, and comfortable lighting solutions.
Image: LAMPAOUS Brand Logo.
