1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your AMD Wraith Max Cooler with RGB LED Fan. This high-performance CPU cooler is designed to efficiently dissipate heat from your processor, ensuring stable and optimal system performance. Please read this manual thoroughly before installation and use.

Image 1.1: The AMD Wraith Max Cooler, featuring a black fan with an illuminated red RGB LED ring and a heatsink base with copper heat pipes.
2. Varnostne informacije
- Pred nameščanjem ali odstranjevanjem kakršnih koli komponent vedno izključite napajanje računalnika.
- Handle the cooler and CPU with care to avoid damage to pins or components.
- Zagotovite ustrezno ozemljitev, da preprečite elektrostatično razelektritev (ESD).
- Hraniti izven dosega otrok.
- Do not operate the cooler if the fan blades are obstructed or damaged.
3. Vsebina paketa
Preverite, ali so v paketu vsi elementi:
- AMD Wraith Max CPU Cooler with pre-applied thermal paste (or a small tube of thermal compound).
- RGB LED connection cable (may vary by version, e.g., 4-pin or 5-pin).
- Mounting brackets (if not pre-attached or integrated with the cooler). Note: Some versions may require existing motherboard mounting hardware.
4. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | AMD |
| Številka modela | 199-999575 |
| Mere izdelka (D x Š x V) | 3.15 cm D x 2.36 cm Š x 3.15 cm V |
| Vrsta napajalnega konektorja | 4-pin |
| voltage | 12 volta |
| Wattage | 140 vatov |
| Metoda hlajenja | zrak |
| Združljive naprave | Desktop (AMD AM4 platform compatible) |
| Nivo hrupa | 38 decibelov |
| Material | Kovina, plastika |
| Teža predmeta | 1.2 funta |
| GTIN / UPC | 730143308779 |
5. Nastavitev in namestitev
Follow these steps carefully to install your AMD Wraith Max Cooler. It is recommended to install the cooler with the motherboard removed from the PC case for easier access, especially if you are not experienced with CPU cooler installations.
- Priprava matične plošče: Ensure your motherboard has the standard AMD AM4 retention bracket installed. If not, install the appropriate backplate and retention clips according to your motherboard's manual.
- Čiščenje površine procesorja: If replacing an old cooler, carefully clean any old thermal paste from the CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.
- Nanesite termalno pasto: The Wraith Max Cooler often comes with pre-applied thermal paste. If not, apply a small pea-sized amount of thermal paste to the center of the CPU's IHS. Do not spread it manually; the pressure from the cooler will spread it evenly.
- Postavitev hladilnika: Carefully align the cooler over the CPU, ensuring the mounting clips on the cooler align with the retention bracket tabs on the motherboard.
- Zavarujte hladilnik:
- Hook the non-lever side of the cooler's mounting clip onto the corresponding tab of the motherboard retention bracket.
- While applying gentle, even pressure, push down the lever on the opposite side of the cooler until it locks onto the second tab of the retention bracket. This step may require firm pressure.
- Priključite napajanje ventilatorja: Connect the 4-pin fan cable from the cooler to the "CPU_FAN" header on your motherboard.
- Connect RGB Cable: Connect the RGB LED cable from the cooler to the appropriate RGB header on your motherboard (e.g., 4-pin 12V RGB header). Refer to your motherboard manual for the correct header location and type.

Slika 5.1: Zapiralo view of the AMD Wraith Max Cooler's heatsink and heat pipes, crucial for efficient heat transfer.
6. Navodila za uporabo
Once installed, the AMD Wraith Max Cooler operates automatically, adjusting fan speed based on CPU temperature. The RGB LED lighting can be controlled via your motherboard's RGB software.
- Delovanje ventilatorja: The fan speed is controlled by the motherboard's BIOS/UEFI settings or operating system software, typically based on CPU temperature. Ensure the fan is spinning freely after system startup.
- Nadzor osvetlitve RGB:
- Install the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
- Use the software to customize the color, effects, and brightness of the RGB LEDs on your Wraith Max Cooler.
- If your motherboard lacks an RGB header or compatible software, the cooler may default to a specific color (e.g., red) or remain unlit, depending on the specific cooler version.
7. Vzdrževanje
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler.
- Čiščenje prahu: Periodically (every 3-6 months, or more often in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan does not spin rapidly during cleaning to prevent damage to the bearings.
- Termalna pasta: Thermal paste typically lasts for several years. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste before reinstallation.
- Pregled ventilatorja: Check the fan for any signs of damage, unusual noises, or obstructions. Replace the cooler if the fan is damaged or malfunctioning.
8. Odpravljanje težav
- Visoke temperature procesorja:
- Prepričajte se, da je hladilnik varno nameščen in da ima dober stik s procesorjem.
- Verify that the fan is spinning. If not, check the fan power connection to the motherboard.
- Preverite, ali je bila termalna pasta pravilno nanesena ali jo je treba ponovno nanesti.
- Očistite morebitni prah z reber hladilnika.
- Zagotovite zadosten pretok zraka v ohišju računalnika.
- Ventilator se ne vrti:
- Check the 4-pin fan cable connection to the "CPU_FAN" header on the motherboard.
- Verify fan settings in the motherboard's BIOS/UEFI.
- Prepričajte se, da lopatice ventilatorja niso ovirane.
- RGB Lights Not Working/Incorrect Color:
- Check the RGB LED cable connection to the motherboard's RGB header. Ensure it's connected to the correct type of header (e.g., 12V GRB for 4-pin).
- Verify that your motherboard's RGB software is installed and configured correctly.
- Ensure the RGB cable is fully seated and not damaged.
9. Garancija in podpora
Za informacije o garanciji in tehnično podporo se obrnite na uradno spletno stran AMD webspletno mesto ali se obrnite na prodajalca. Shranite dokazilo o nakupu za uveljavljanje garancije.
Za dodatno pomoč obiščite Podpora AMD webmesto.