SKYDANCE R9 RGBW LED SPI Controller Set
OVERVIEW
RF 2.4G RGB/RGBW LED SPI Controller Set
Model No.: SC + R9
SC control LED lights with the following 32 kinds compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811,WS2812, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B, SK6812, UCS8904B, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A.
By RF remote controls you can select from a variety of dynamic lighting effects, adjust changing speed and brightness, set control pixels quantity, adjust RGB sequence, select IC type etc. you can also customize two kinds of scene modes to bring you fantastic color.
Feature
- Mini-style RF 2.4G multi-pixel RGB/RGBW controller with SPI signal output.
- Output SPI signal to control a variety of digital LED lights with the compatible ICs listed above. IC type and R/G/B order can be set through the Remote.
- Adopt 2.4GHz wireless technology, remote distance up to 30m.
- Built in 32 dynamic modes, including horse-race, chase, flow, trail, gradual change style.
Technical parameter
LED Remote LED Receiver
- Output signal: RF(2.4GHz): Input voltage: 5-24VDC
- Working voltage : 3VDC(CR2032): Output signal: SPI (DATA / CLK)
- Standby time: 2 years: Output dots: 1024 Max
- Remote distance: 30m: Size: L97×W33×H18mm
- Size: L107×W58.5×H9mm
Dimension
Match guide
- Match: Short press match key of the receiver, within 5s, press on/off key of the remote.
- Delete: Long press match key of the receiver for 5s, delete all matched remote.
Interface instruction
Remote function
- Mode+/-: Short press switch dynamic mode built-in controller, long press 2s Mode+ run mode cycle, long press 2s Mode- run the first mode. The remote is default 10 dynamic mode, when match with SPI controller which has 32 dynamic modes, please long press 2s Mode+ key firstly.
- Speed+/-: Adjust dynamic mode speed, short press 10 levels, long press 2s get the fastest / slowest speed.
- Bright+/-: Adjust brightness, short press 10 levels, long press 1-5s for continuous 256 levels adjustment.
- R/G/B+/-: Adjust R/G/B brightness respectively, short press 10 levels, long press 1-5s for continuous 256 levels adjustment.
- White: Adjust white color, short press turn on/off white(RGB mix), long press 1-5s for continuous 256 levels saturation adjustment.
- Scene: Two scene memory, short press recall the scene, long press 2s save the current color into the scene.
Wiring diagram
SC Connect with SPI spot light(TM1803)
SC Connect with SPI spotlight(TM1803)
RGB change mode list
| No. | Name | No. | Name | No. | Name |
| 1 | Red horse race white ground | 12 | Blue White chase | 23 | Purple float |
| 2 | Green horse race white ground | 13 | Green Cyan chase | 24 | RGBW float |
| 3 | Blue horse race white ground | 14 | RGB chase | 25 | Red Yellow float |
| 4 | Yellow horse race blue ground | 15 | 7 color chase | 26 | Green Cyan float |
| 5 | Cyan horse race blue ground | 16 | Blue meteor | 27 | Blue Purple float |
| 6 | Purple horse race blue ground | 17 | Purple meteor | 28 | Blue White float |
| 7 | 7 color multi horse race | 18 | White meteor | 29 | 6 color float |
| 8 | 7 color horse race close + open | 19 | 7 color meteor | 30 | 6 color smooth sectionally |
| 9 | 7 color multi horse race close + open | 20 | Red float | 31 | 7 color jump sectionally |
| 10 | 7 color scan close + open | 21 | Green float | 32 | 7 color strobe sectionally |
| 11 | 7 color multi-scan close + open | 22 | Blue float |
Compatible IC type
| No. | IC type | Output signal |
| 1 | TM1803 | DATA |
| 2 | TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912, UCS2903,UCS2909,UCS2912,WS2811,WS2812 | DATA |
| 3 | TM1829 | DATA |
| 4 | TLS3001,TLS3002 | DATA |
| 5 | GW6205 | DATA |
| 6 | MBI6120 | DATA |
| 7 | TM1814B(RGBW) | DATA |
| 8 | SK6812(RGBW) | DATA |
| 9 | UCS8904B(RGBW) | DATA |
| 10 | LPD6803,LPD1101,D705,UCS6909,UCS6912 | DATA,CLK |
| 11 | LPD8803,LPD8806 | DATA,CLK |
| 12 | WS2801,WS2803 | DATA,CLK |
| 13 | P9813 | DATA,CLK |
| 14 | SK9822 | DATA,CLK |
| 15 | TM1914A | DATA |
| 16 | GS8206,GS8208 | DATA |
Use remote set SPI digital LED strip
- Set LED strip length [Pixel number(8~1024)]. * + 3 number + * for example:
032, set pixel number to 32.
600, set pixel number to 600.
1024, set pixel number to 1024. - Set LED strip chip type. * + 2 number + *
11：TM1803
12：TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,UCS2903,UCS2909,UCS2912,WS2811,WS2812
13：TM1829
14：TLS3001,TLS3002
15：GW6205
16：MBI6120
17：TM1814B(RGBW)
18：SK6812(RGBW)
19：UCS8904B(RGBW)
21：LPD6803,LPD1101,D705,UCS6909,UCS6912
22：LPD8803,LPD8806
23：WS2801,WS2803
24：P9813
25：SK9822
31：TM1914A - Set LED strip RGB order. * + 1 number + 1：RGB, 2：RBG, 3：GRB, 4：GBR, 5：BRG, 6：BGR.
Safety information
- The product shall be installed and serviced by a qualified person.
- This product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
- Please check if the output voltage of any power supplies used to comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Documents / Resources
 | SKYDANCE R9 RGBW LED SPI Controller Set [pdf] Instruction Manual R9 RGBW LED SPI Controller Set, R9, RGBW LED SPI Controller Set |
