Universal TV Remote devices are compatible replacement controls designed to operate a wide variety of television brands including Samsung, LG, Sony, and more.
Univerzálny TV diaľkový ovládač refers to a category of generic and multi-compatible remote control devices designed to replace lost or broken original remotes. These devices, such as the widely used RC-G008+ model, feature pre-programmed code libraries that allow users to control televisions from major manufacturers like LG, Samsung, Sony, Philips, Panasonic, and Sharp without needing the original controller. They typically offer easy setup methods including automatic code search and direct brand code entry.
Designed for convenience and broad compatibility, these remotes often feature dedicated buttons for common functions and support for LCD and LED TVs. While many are sold under generic labeling, they provide essential functionality for home entertainment setups, often consolidating control for multiple devices. Users can easily program these remotes using simple key combinations to match their specific TV model.
Najnovšie manuály od manuals+ vybrané pre túto značku.
Časté otázky týkajúce sa manuálov, registrácie a podpory pre túto značku.
To carry out an automatic search on models like the RC-G008+, press the [MUTE] + [POWER] buttons together until the LED lights up. Release them, then press [MUTE] again to enter search mode. When the volume indicator appears on your TV, press [MUTE] to stop the search, then press [POWER] to save.
To restore the remote to its initial settings, press and hold the [OK] + [0] buttons simultaneously for about 3 seconds until the LED blinks four times.
If the remote does not function correctly after entering a code, try inputting another 3-digit code from the brand list provided in the manual and repeat the setup process. Generally, you can also use the automatic search function to find a compatible code.
Most Universal TV Remote models generally support major brands including LG, Samsung, Sony, Philips, Panasonic, Sharp, Toshiba, Hitachi, Vizio, and TCL, among others.
Press the [MUTE] + [POWER] buttons until the LED lights up. Then, input the 3-digit code corresponding to your TV brand from the code list. If the code is correct, the LED will turn off.