GDOR OK1575A2

GDOR Professional Blender OK1575A2 User Manual

Model: OK1575A2

Dôležité bezpečnostné opatrenia

Pri používaní elektrických spotrebičov je potrebné vždy dodržiavať základné bezpečnostné opatrenia, aby sa znížilo riziko požiaru, úrazu elektrickým prúdom a/alebo zranenia osôb, vrátane nasledujúcich:

  • Pred použitím mixéra si prečítajte všetky pokyny.
  • Aby ste sa chránili pred úrazom elektrickým prúdom, neponárajte základňu motora, kábel ani zástrčku do vody ani iných kvapalín.
  • Keď akékoľvek zariadenie používajú deti alebo v ich blízkosti, je potrebný prísny dohľad.
  • Vytiahnite zástrčku zo zásuvky, keď ju nepoužívate, pred montážou alebo demontážou dielov a pred čistením.
  • Zabráňte kontaktu s pohyblivými časťami.
  • Nepoužívajte žiadny spotrebič s poškodeným káblom alebo zástrčkou, ani po poruche spotrebiča, jeho páde alebo akomkoľvek inom poškodení. V prípade potreby kontroly, opravy alebo nastavenia kontaktujte zákaznícky servis.
  • Použitie príslušenstva, ktoré neodporúča alebo nepredáva výrobca, môže spôsobiť požiar, úraz elektrickým prúdom alebo zranenie.
  • Nepoužívajte vonku.
  • Nenechávajte kábel visieť cez okraj stola alebo pultu ani sa dotýkať horúcich povrchov.
  • Počas mixovania nedotýkajte sa nádoby rukami a kuchynským náradím, aby ste predišli možnému vážnemu zraneniu osôb alebo poškodeniu mixéra. Škrabku je možné použiť, ale iba keď mixér nie je v prevádzke.
  • Čepele sú ostré. Zaobchádzať opatrne.
  • Vždy používajte mixér s nasadeným vekom.
  • Do not blend hot liquids in the sealed to-go cup as pressure buildup may result in injury.
  • Ensure the blender jar or to-go cup is correctly locked onto the motor base before operation.

Komponenty produktu

The GDOR Professional Blender includes the following parts:

  • Motorová základňa: Umiestňuje motor s výkonom 1300 W a ovládací panel.
  • 67 oz Glass Jar: Large capacity blending container with a 6-leaf blade assembly.
  • Veko s plniacim uzáverom: For the glass jar, allows adding ingredients during blending.
  • 22 oz To-Go Cup: Personal blending cup for single servings.
  • 4-Leaf Blade Assembly: Specifically designed for the to-go cup.
  • Cestovné veko: For the to-go cup, allows for portability.
GDOR Professional Blender with 6-leaf blade glass jar and 4-leaf blade to-go cup

Image: The GDOR Professional Blender showing the main unit, the 6-leaf blade assembly for the glass jar, and the 4-leaf blade assembly for the to-go cup.

Comparison of 6-leaf blade and 4-leaf blade assemblies

Image: A close-up comparison of the 6-leaf blade assembly for the large glass jar and the 4-leaf blade assembly for the portable to-go cup.

Nastavenie

Vybalenie a počiatočné čistenie

  1. Opatrne vyberte všetky komponenty z obalu.
  2. Wash the glass jar, lids, and blade assemblies in warm, soapy water. Rinse thoroughly and dry. The glass jar is dishwasher safe.
  3. Utrite základňu motora reklamouamp plátno. Základňu motora neponárajte do vody.

Montáž

The blender features a safety lock design. The appliance will only power on when the jar or cup is correctly assembled and locked into the motor base.

  1. Základňu motora umiestnite na čistý, suchý a rovný povrch.
  2. For the Glass Jar: Place the 6-leaf blade assembly onto the bottom of the glass jar. Ensure it is securely tightened. Then, place the assembled glass jar onto the motor base, aligning the arrows on the jar with the arrows on the base. Turn clockwise until it locks into place.
  3. For the To-Go Cup: Add ingredients to the to-go cup. Screw the 4-leaf blade assembly onto the open end of the to-go cup until secure. Invert the cup and place it onto the motor base, aligning the tabs and turning clockwise until it locks.
Three images showing how to place the glass jar onto the blender base and lock it for safety

Image: Visual guide demonstrating the safety lock mechanism, showing the glass jar being placed and twisted onto the motor base until securely locked.

Návod na obsluhu

Ovládací panel skončilview

The GDOR Professional Blender features a touch control panel with 6 preset programs and manual controls.

Blender control panel with 6 preset programs and manual time adjustment

Image: The blender's control panel, highlighting the 6 preset programs (Blend, Milkshake, Smoothies, Ice Crush, Sauce, Auto Clean) and the manual time adjustment feature.

  • Prednastavené programy: Select from Blend (90s), Milkshake (70s), Smoothies (60s), Ice Crush (40s), Sauce (32s), and Auto Clean (70s). Each program has a unique blending pattern.
  • Manuálne nastavenie času: Use the '+' and '-' buttons to set a blending time between 10 and 90 seconds for customized recipes.
  • Pulz (P): Poskytuje krátke dávky vysokorýchlostného mixovania na sekanie alebo rýchle mixovanie.
  • Štart/Stop: Initiates or pauses the selected program or manual blending.

Using the 67 oz Glass Jar

  1. Ensure the 6-leaf blade assembly is securely attached to the glass jar.
  2. Add your desired ingredients to the glass jar. Do not exceed the maximum fill line.
  3. Place the lid securely on the glass jar and ensure the filler cap is in place.
  4. Place the assembled jar onto the motor base and lock it into position.
  5. Zapojte mixér do elektrickej zásuvky.
  6. Select a preset program or set a manual time using the '+' and '-' buttons.
  7. Stlačte tlačidlo „Štart/Stop“ pre spustenie mixovania.
  8. To add ingredients during blending, remove the filler cap and carefully add items. Replace the cap immediately.
  9. Once blending is complete, press 'Start/Stop' and unplug the blender.
  10. Carefully remove the glass jar from the motor base and pour out the contents.
Man pouring a smoothie from the large glass jar of the GDOR blender

Image: A man pouring a freshly blended smoothie from the large 67 oz glass jar into serving glasses, demonstrating the blender's capacity.

Using the 22 oz To-Go Cup

  1. Add your desired ingredients to the 22 oz to-go cup. Do not exceed the maximum fill line.
  2. Screw the 4-leaf blade assembly securely onto the open end of the to-go cup.
  3. Invert the cup and place it onto the motor base, aligning the tabs and turning clockwise until it locks into position.
  4. Zapojte mixér do elektrickej zásuvky.
  5. Select a preset program or set a manual time. For best results with the to-go cup, consider shorter blending times or the 'Smoothies' program.
  6. Stlačte tlačidlo „Štart/Stop“ pre spustenie mixovania.
  7. Once blending is complete, press 'Start/Stop' and unplug the blender.
  8. Carefully remove the to-go cup from the motor base. Unscrew the blade assembly and replace it with the travel lid for on-the-go convenience.
Three images showing the process of blending in the to-go cup, covering it, and taking it on the go

Image: A sequence of images illustrating the 'Blend and Go' feature: blending ingredients in the to-go cup, attaching the travel lid, and carrying the cup.

Údržba a čistenie

Funkcia automatického čistenia

The blender features an 'Auto Clean' program for convenient cleaning of the glass jar and blades.

  1. After use, rinse the glass jar to remove large food particles.
  2. Fill the glass jar with 2-3 cups of warm water and add a drop of dish soap.
  3. Secure the lid and place the jar onto the motor base, locking it in place.
  4. Select the 'Auto Clean' program (70 seconds) and press 'Start/Stop'.
  5. Once the cycle is complete, unplug the blender, remove the jar, and rinse thoroughly.
Blender glass jar with water swirling during the self-cleaning cycle

Image: The glass jar of the GDOR blender filled with water, demonstrating the self-cleaning function in action with water swirling rapidly.

Ručné čistenie

  • Pred čistením mixér vždy odpojte.
  • The glass jar, lids, and to-go cup are dishwasher safe (top rack recommended).
  • The blade assemblies should be hand-washed carefully with warm, soapy water. Use a brush to clean around the blades. Handle blades with extreme caution as they are sharp.
  • Utrite základňu motora reklamouamp handričkou. Základňu motora neponárajte do vody ani ju nestriekajte vodou.
  • Pred uskladnením sa uistite, že sú všetky časti úplne suché.

Riešenie problémov

If you encounter issues with your GDOR Professional Blender, refer to the following common problems and solutions:

ProblémMožná príčinaRiešenie
Mixér sa nespustí.Not plugged in; Jar/cup not correctly assembled; Overload protection activated.Ensure the power cord is securely plugged in. Verify the jar or cup is locked into the motor base. If the motor stopped due to overload, unplug, remove some ingredients, and wait 15 minutes before restarting.
Ingrediencie sa nemiešajú hladko.Príliš málo tekutiny; Príliš veľa ingrediencií; Ingrediencie sú príliš veľké alebo tvrdé.Add more liquid. Reduce the amount of ingredients. Cut hard ingredients into smaller pieces. Use the Pulse function to break down larger chunks.
Blender leaks from the bottom of the jar/cup.Blade assembly not tightened; Seal ring missing or damaged.Ensure the blade assembly is securely tightened onto the jar or cup. Check if the seal ring is properly seated or if it needs replacement.
Unusual noise or odor during operation.Overload; Foreign object in blades; Motor issue.Stop the blender immediately. Unplug and check for any obstructions. If the issue persists after reducing ingredients and checking for obstructions, discontinue use and contact customer support.

If the problem persists after attempting these solutions, please contact GDOR customer support.

Špecifikácie

FunkciaDetail
Číslo modeluOK1575A2
ZnačkaGDOR
Sila1300 wattov
Voltage120 voltov
Large Jar Capacity67 oz (Glass)
To-Go Cup Capacity22 oz (BPA-Free)
Materiál čepeleStainless Steel (6-leaf for jar, 4-leaf for cup)
Typ ovládaniaTouch, Manual
Počet rýchlostí7
Špeciálne funkcie6 Smart Programs, High Power Motor, Durable Glass Jar, Manual Time Adjustment, Self-cleaning, Portable Cup
Rozmery produktu (D x Š x V)6.5 cm x 8.38 cm x 16.42 cm
Diely vhodné do umývačky riaduGlass Jar, Lids, To-Go Cup

Záruka a podpora

GDOR products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official GDOR webstránky.

For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact GDOR customer support through the retailer where the product was purchased or via the contact information provided on the GDOR official webstránky.

© 2026 GDOR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.