SILVERGEAR 1035 Bluetooth Wireless Headphones User Manual
SILVERGEAR 1035 Bluetooth Wireless Headphones

Thank you for purchasing the Silvergear Wireless Headphone. This manual will provide instructions for effective and safe use of the device. Please read it carefully before use and store the manual in a safe place for future reference.

Technical data

Bluetooth: V4.0
Wireless working range: 10m
Distortion factor: <1%
SNR: >95dB
Radio frequency: 87.5-108MHz
Frequency range: 2.401-2.480GHz
Frequency response: 20Hz-20KHz
Supports TF cards: 128MB-32GB
Charging voltage: Micro USB 5V
Working current: 25-40mA
Output power: 2*20mW
Normal working time: up to 4 hours
Charging time: less than 2 hours

Description of parts

  1. Power switch Turn the headphone ON. It will automatically enter into wireless mode. The indicator light flashes red and blue.
  2. Mode button (M) Short press: switch between radio, Bluetooth and TF card mode.
  3. Buttons
    • Music: Short press to play and pause music.
    • Answering calls: Short press to answer a call or to hang up. Long press to decline calls. Press two times to redial the previous number.
    • FM radio: Short press for an automatic search and store the radio station.
  4. Buttons /V+
    Short press: play the next song or select the next saved radio station Long press: turn the volume UP in any mode.
  5. Buttons / V-
    Short press: play the previous song or select the previous saved radio station
    Long press: turn the volume DOWN in any mode.
  6. TF card slot
  7. Microphone
  8. Audio input
  9. Indicator light
  10. Micro USB charging port. Connect the USB charging cable to a computer or a power adapter to charge.


Insert the micro USB cable in a USB port to charge. The indicator light will flash red when charging and turns off when the headphone is fully charged.

Low battery
When the battery is low you will hear ‘Low battery please charge’ and the headphone will automatically turn off. If the headphones are not used for a long period of time, charge at least once a month to extend the battery life.

Auto power off
If not connected in wireless mode, the headphones will turn off automatically after 5 minutes.

Wireless pairing
The headphone supports pairing with wireless devices such as mobile phones, tablets and TVs. – The indicator light flashes red and blue in Bluetooth mode when it is pairing. Search for ‘Silvergear Headphone’ on your device. When pairing is successful you will hear a sound and the indicator light will turn blue.

Play music with cable
Insert the 3.5mm audio jack into the audio input port. The wireless connection automatically turns off to save battery power.


The crossed out wheelie bin symbol on this product is to remind you that electrical products should not be disposed of with household waste. Please dispose of it responsibly at an approved waste or recycling facility. Check with your local authority for recycling advice.

Quality Gear For Everyone


art. no.: 1035
batch no.: 210518

Overschiestraat 63
1062 XD Amsterdam
The Netherlands


Documents / Resources

SILVERGEAR 1035 Bluetooth Wireless Headphones [pdf] User Manual
1035, Bluetooth Wireless Headphones, 1035 Bluetooth Wireless Headphones

Leave a comment

Your email address will not be published. Required fields are marked *