SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-logo

SIERRA COMFORT SC-2001 Classic 2-Section Stationary Massage

SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-prod

INTENDED USE STATMENT

Sierra Comfort massage tables are designed and manufactured to be used responsibly and for intended uses only. Our tables are built specifically for immobile/traditional massage practices and to be used within the guidelines of all warnings and instruction manuals. At no time should the table be used in excess of its working weight capacity (weight of subject on table, plus the amount of pressure being applied to the subject). When receiving treatment, clients should remain still with weight and body position distributed evenly along the tabletop. Never should more than one person be allowed on the table at once. Do not front load one end of the table. Misuse, excessive force or movement, and/or direct pressure may cause structural components to fail, potentially resulting in injury to the client and/or operator.
Prior to use of your Sierra Comfort massage table, be certain to read and understand all instructions and warnings. Proper setup, use, and care of your table willprevent accidents and injury, as well as maintain the integrity of the product. Any questions regarding your Sierra Comfort product should be emailed directly to our support team at [email protected] In summary; Sierra Comfort concludes its products are safe when used as intended. In no event shall Sierra Comfort be liable for any direct, indirect, punitive, incidental, or consequential damages to property or life arising out of or connected with the misuse of its products.

WARRANTY

  1.  Sierra Comfort warrants that all new purchases, referred to hereinafter as the “product”, are free from manufacturing flaws/defects in material and workmanship. Our products are safely designed and manufactured to support proper usage, as outlined in our user manuals and Intended Use Statement.
  2.  Our limited warranty is valid for 2 years from the original purchase date. The warranty is applicable only to the original buyer and to items purchased brand new directly from Sierra Comfort or from one of our named authorized dealers. Our warranty will not cover any Sierra Comfort products purchased from unauthorized dealers or miscellaneous sellers.
  3.  If upon receipt your item is found defective, flawed, defunct, used, or malfunctioning; please report the issue to us immediately and stop all use of the product until the issue is fully resolved. Items purchased directly from Sierra Comfort can be returned within 30 days of receipt. Full details regarding our Return Policy can be found on our website. Sierra Comfort products purchased from authorized dealers/retailers will be subject to the return policy specific to that retailer.
  4.  Our warranty covers any structural and functional components pertaining to the original design of our massage tables, including table legs, footings, casters, support panels, cable frame supports, electrical components and hardware. The warranty does not cover claims relating to foam cushioning, vinyl upholstery coverings, and any accessory parts that may suffer from normal wear and tear.
  5.  Our warranty is applicable only to flaws/defects in workmanship, structural materials/parts, and/or components. The warranty does not apply to normal wear and tear, altered or removed parts/components, defects resulting from misuse/unintended use, lack of maintenance, accidents, spills, exposure to extreme conditions, or incidental and consequential costs such as; storage, telephone, rental, shipping, transportation, inconvenience, loss of income, loss of time, or other consequential damages. Any modifications made to the product will void the warranty completely.
  6.  The warranty does not cover any accessory parts that may be included with the massage table; including face cradles, face pillows, carrying bags, sheets, and bolsters.
  7. Our obligation under this warranty is limited to replacing parts/components as necessary to remove malfunction from flaws/defects in structural materials and/or components. Any parts/components will be replaced and shipped free of charge so as long as the warranty is valid. Sierra Comfort reserves the right to improve the design of any product without any obligation to improve a product previously manufactured.
  8.  Warranty claims will require the submittal of the original order receipt, along with an explanation, plus photos/videos detailing any parts/components claimed to be flawed/defective/malfunctioning.
  9.  Sierra Comfort provides detailed and comprehensive instruction manuals, warnings, intended use statements, maintenance/care instructions, and disclaimers for the benefit and safety of our buyers in order to ensure safe and responsible practices. We are not responsible if our products are used in a way that is not intended and/or not in accordance with provided instructions, warnings, intended uses, and safe practices. The buyer is responsible for reviewing all provided materials in order to ensure proper usage and safety.

SAFETY & WARNING

  1.  Prior to use, thoroughly inspect all areas of the massage table and included accessories for any manufacturing flaws/defects; including, but not limited to, the table frame, hardware, and the alignment/security of all components.
  2.  Your table should be installed in a dedicated treatment area meant for private use only. Allow for at least 3 feet of clearance around the entire table.
  3.  Prior to use, be sure that all four table legs are adjusted to the same height and secured by their adjustable knobs. Be sure to position your table in an area having a level and firm surface so that all four feet remain secure to the ground. The tabletop should be completely level when in position for use.
  4.  When moving onto or off of the tabletop, be sure to do so with ease and towards the center of the tabletop were most stable.
  5.  When adjusting the backrest or leg rest, be sure that the client is removed from the table, or sitting in a position that does not add weight to the area being adjusted.
  6.  Do not overload one side of the table. Uneven and/or excess weight on one side may cause the table to lift/tilt.
  7.  Never should there be more than one person on the massage table at once. Avoid any sudden and direct pressure on the tabletop. Never stand, jump, or move erratically on the massage table.
  8.  When receiving treatment, clients should remain still with weight and body position distributed evenly along the tabletop.
  9.  Do not apply more than 500 lbs. (227 kg) of total working weight to the tabletop. NOTE; the total working weight is equal to the weight of the subject on the table plus the weight added through downward pressure.
  10.  Do not apply more than 25 lbs. (11 kg) of total working weight to the face cradle.
  11.  Do not use any attachments, accessories, or components that were not manufactured/supplied by Sierra Comfort.
  12.  Never use or store your table in wet or overly humid conditions. Water/excessive moisture may damage materials and components.

MODEL TYPE

  • CLASSIC STATIONARY MASSAGE TABLE, FLAT (SC-2000)
    • Tabletop: Length 73” / Width 30” / Depth 3”
    • Table Height (Adjustable): 27.5” to 35”
    • Table Weight: 76 lbs.
    • Working Weight Capacity: 500 lbs.
    • Elongated Adjustable Face Cradle (SC-529)
    • Elongated Face Pillow (SC-533)SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-1
  • CLASSIC STATIONARY MASSAGE TABLE, ADJUSTABLE BACK (SC-2001)
    • Tabletop: Length 73” / Width 30” / Depth 3”
    • Table Height (Adjustable): 27.5” to 35”
    • Adjustable Backrest Range: 0° to 70°
    • Table Weight: 91 lbs.
    • Working Weight Capacity: 500 lbs.
    • Elongated Adjustable Face Cradle (SC-529)
    • Elongated Face Pillow (SC-533)SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-2
  • CLASSIC STATIONARY MASSAGE TABLE, ADJUSTABLE 4 SECTION (SC-2002)
    • Tabletop: Length 73” / Width 30” / Depth 3”
    • Table Height (Adjustable): 27.5” to 35”
    • Adjustable Backrest Range: 0° to 70°
    • Table Weight: 103 lbs
    • Working Weight Capacity: 500 lbs.
    • Elongated Adjustable Face Cradle (SC-529)
    • Elongated Face Pillow (SC-533)SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-3

TABLE SETUP & INSTALLATION

INCLUDED HARDWARE

  • STEP 1: Unpack the table and all of its contents. Turn over the table and lay onto a level and protected surface. We suggest first covering the ground with plastic, a cloth sheet, or a tarp to ensure the protection of the tabletop, and to keep it clean.
  • STEP 2: Unfold the table legs to a 90 degree angle. Use the provided socket lock wrench (C) and socket head wrench (D) to secure the bolts (A) to each of the legs, accompanied by the washers (F) and nuts (G); as detailed in the diagram.
  • STEP 3: Fit the corners of the storage shelf into the slots along the table legs. Use the bolts (B) and socket head wrench (D) to secure the shelf into place. Be sure all bolts are firmly tightened.
    • A: 8x65mm Bolt (4)
    • B: 6x30mm Bolt (8)
    • C: Socket Lock Wrench (1)
    • D: Socket Head Wrench (1)
    • E: Lock Knob (4)
    • F: Washer (8)
    • G: 3/8” Nut (4)SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-4

FEATURES & ADJUSTMENTS

ADJUST TABLE HEIGHT

With the table still turned over, secure all four table leg extensions into the established legs by threading the exposed screws through the adjustment holes. Be certain that all four legs are adjusted to the same height. Turn the locking knobs onto the screws to fully secure the legs.SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-5

MANUAL BACKREST ADJUSTMENT (SC-2001 & SC-2002 MODELS ONLY)

The backrest is adjusted manually by pulling outward on the lever next to the headrest inserts. Use your opposite hand to guide the backrest as it opens. The hydraulic gas lift mechanism located underneath the backrest is engaged during this process. To lock the backrest into position, simply release the lever. NOTE: Do not adjust while your client is lying against the backrest, as the opposing weight may compromise structural components. Instruct your clients to either lean away from the backrest, or to remove themselves from the table entirely. To lower the backrest; pull the lever outward and use your opposite hand to push downward on the backrest. Release the lever to lock the backrest into place. This action allows you to lower the angle of the backrest or close it into its flat position.

MANUAL LEG REST ADJUSTMENT (SC-2002 MODEL ONLY)

In order to adjust the leg rest from its flat position; pull the lever located on the leg side of the tabletop outward. Use your opposite hand to guide the leg rest as it opens. The leg rest will naturally move upwards with assistance from the hydraulic gas lift mechanism.To lock into position, simply release the lever. To lower the leg rest; pull the lever outward and use your opposite hand to push downward on the leg rest. Release the lever to lock the leg rest into place. This action allows you to lower the angle of the leg rest or close it into its flat position.SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-6

HEADREST & FACE PILLOW

STEP 1: Place headrest face down and fully release the locking lever so that the tubular arms are able to pivot freely.
STEP 2: Unfold the tubular arms and insert through the grommet rings at the end of the table.
STEP 3: Adjust the angle of the headrest to the desired position and then push the lever downwards to lock into place. Secure the face pillow to the headrest by placing it accordingly onto the Velcro strips.
STEP 4: If the headrest appears loose or slips down when pressure is applied; (1) release the lever to unlock the face cradle, (2) turn the lever clockwise for 1- 2 rotations, (3) push the lever downward into the locked position.SIERRA-COMFORT-SC-2001-Classic-2-Section-Stationary-Massage-fig-7

MAINTENANCE & CARE

Remove daily dirt and grime from the table with mild soap and warm water solution. Dry with a soft, lint-free cloth. When disinfecting, use isopropanol (rubbing alcohol) based hospital-grade disinfectant cleaner. Be sure it is approved for use on polyurethane vinyl before applying. For minor stains, use a mild non-abrasive cleaner on a damp cloth. Gently wipe the surface to remove the stain and rinse thoroughly with warm water. Dry with a soft lint-free cloth.
WOODCARE:
The massage table is made of select hardwoods and is finished with lacquer that requires no special care. If desired, you may polish occasionally with a quality wood care product.

STORAGE
STORAGE: Keep the table in a cool and dry area away from direct sunlight. Do not expose the table to extreme temperatures or moisture.

CONTACT US

For information and questions regarding our products and/or services, please visit us at www.sierracomfort.com. For additional support, you may contact us at [email protected]

Documents / Resources

SIERRA COMFORT SC-2001 Classic 2-Section Stationary Massage Table [pdf] User Manual
SC-2001 Classic 2-Section Stationary Massage Table, SC-2001, Classic 2-Section Stationary Massage Table

Leave a comment

Your email address will not be published.