Acquaer Shallow Well Jet Pump (Model CCJC, 1HP) Instruction Manual

1. හැඳින්වීම

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Acquaer Shallow Well Jet Pump, Model CCJC. This 1HP electric motor pump is designed for wells up to 25 feet deep, providing strong suction and water flow. It is suitable for various applications including irrigation systems, sprinkler setups, gardens, and supplying water to homes or small farms.

Acquaer Shallow Well Jet Pump overview, highlighting its performance capabilities.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety warnings and instructions before installing, operating, or performing maintenance on this pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• Always disconnect power before servicing the pump.
• විදුලි කම්පනය වැළැක්වීම සඳහා නිසි බිම් සැකසීම සහතික කරන්න.
• Do not operate the pump dry; always ensure it is primed with water before starting.
• Install the pump in a well-ventilated area, protected from freezing temperatures and direct sunlight.
• ස්ථාපනය සහ නඩත්තු කිරීමේදී සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) භාවිතා කරන්න.

3. නිෂ්පාදන ලක්ෂණ

• බලවත් 1HP මෝටරය: Provides strong suction and high water flow, suitable for wells up to 25 feet deep.
• ද්විත්ව වෙළුමtage Operation (115V/230V): The pump motor is designed to operate safely on either 115V or 230V power supplies. It is factory-set for 230V.
• ස්වයංක්‍රීය අධික උනුසුම් ආරක්ෂාව: An intelligent system automatically shuts off the pump if it runs out of water or the motor overheats, preventing damage and extending product life.
• Automatic Pressure Switch: Functions as a pressure booster, activating the pump when pressure drops below 20 PSI and deactivating it when pressure exceeds 40 PSI, ensuring consistent water supply. A pressure gauge is included on the casing for monitoring.
• Durable Cast Iron Volute: Constructed with a rugged cast iron casing for enhanced durability and reliable performance.

Key features including the capacitor motor, quality construction, and warranty information.

4. සංරචක අවසන්view

Familiarize yourself with the main components of your Acquaer Shallow Well Jet Pump:

• Priming Port: Used to fill the pump with water before initial operation.
• 1" NPT Outlet: Connection point for the discharge pipe.
• 1-1/4" NPT Inlet: Connection point for the suction pipe from the well.
• වෙළුමtage Box: Contains the electrical connections and voltagඊ තේරීම් ස්විචය.
• බල පෙට්ටිය: Houses the motor's electrical components.
• පීඩන මානය: වත්මන් ජල පීඩනය පෙන්වයි.

5. පිහිටුවීම සහ ස්ථාපනය

5.1. වෙළුමtagඊ තෝරා ගැනීම

Your pump is factory-set to 230V. If your power supply is 115V, you must adjust the voltage switch before initial use. Refer to the diagram below:

• 115V මෙහෙයුම සඳහා: Ensure the switch is in the "115V" (down) position.
• 230V මෙහෙයුම සඳහා: Ensure the switch is in the "230V" (up) position.

CAUTION: Please select the correct voltage for the first time using to prevent damage to the pump.

5.2. පොම්පය ප්‍රයිම් කිරීම

Before starting the pump for the first time or after it has been drained, it must be primed with water to ensure proper operation and prevent damage from dry running.

1. පියවර 1: Unscrew the priming port cap located on the top of the pump casing. Carefully pour water into the cavity until it is completely full.
2. පියවර 2: Once the cavity is fully filled with water, reinstall the priming port cap securely. The pump is now ready for startup.

6. මෙහෙයුම් උපදෙස්

The Acquaer Shallow Well Jet Pump features an automatic pressure switch for convenient operation. Once properly installed and primed, the pump will manage water pressure automatically.

• The pump will automatically start when the system pressure drops below 20 PSI.
• The pump will automatically shut off when the system pressure reaches or exceeds 40 PSI.
• Monitor the built-in pressure gauge to observe system pressure.
• Ensure a continuous water supply to the pump inlet to prevent dry running.

7. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ පොම්පයේ ආයු කාලය සහ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කරයි.

• ශීත ඍතුකරණය: In areas subject to freezing temperatures, drain the pump completely to prevent damage. Disconnect power, open drain plugs, and remove the priming cap to allow all water to escape.
• සම්බන්ධතා පරීක්ෂා කරන්න: Periodically check all pipe connections for leaks and tighten as necessary.
• පිරිසිදු වාතාශ්‍රය: Ensure motor cooling vents are free from debris to prevent overheating.
• Pressure Tank (if applicable): If used with a pressure tank, regularly check the air pressure in the tank, ensuring it is 2 PSI below the pump's cut-in pressure.

8. දෝශ නිරාකරණය

ඔබේ පොම්පය සමඟ ගැටළු ඇති වුවහොත්, පහත පොදු දෝශ නිරාකරණ පියවර වෙත යොමු වන්න:

ගැටළු පවතින්නේ නම්, සුදුසුකම් ලත් සේවා නිලධාරීන් අමතන්න.

9. පිරිවිතර

Detailed technical specifications for the Acquaer Shallow Well Jet Pump, Model CCJC:

10. වගකීම් සහ සහාය

Your Acquaer Shallow Well Jet Pump comes with a 24-month warranty, ensuring peace of mind regarding product quality and performance.

• වගකීම් කාලය: මිලදී ගත් දින සිට මාස 24 ක්.
• සහාය: For technical assistance, warranty claims, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Acquaer webඅඩවිය.