Duendhd M6 LCD Display for E-Bike 36V/48V 5-Pin JN Controller User Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Duendhd M6 LCD Display for E-Bikes. Please read this manual thoroughly before use to ensure proper function and safety. This display is designed for use with JN E-Bike controllers and Pasion E-Bike motor kits.

2 ආරක්ෂිත තොරතුරු

• Always ensure the E-Bike is powered off before installing or removing the display.
• Do not attempt to modify the display or its wiring. Unauthorized modifications can lead to damage or injury.
• Ensure all connections are secure and waterproof where specified.
• Keep the display clean and dry. Avoid exposure to extreme temperatures or direct sunlight for prolonged periods.
• If you are unsure about any installation steps, consult a qualified E-Bike technician.
• වැදගත් අනුකූලතා සටහන: The JN-LCD-M6 display is specifically designed to be compatible only with JN (JIANNUO) controllers. Using it with other controller brands may result in malfunction or damage.

3. පැකේජ අන්තර්ගතය

කරුණාකර පැකේජයේ අන්තර්ගතය ප්‍රවේශමෙන් පරීක්ෂා කරන්න. කිසියම් අයිතමයක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, ඔබේ සිල්ලර වෙළෙන්දා අමතන්න.

• 1 x Duendhd M6 LCD Display (with integrated 5-pin waterproof connector cable)

4. නිෂ්පාදන අවසන්view

The Duendhd M6 LCD Display is a robust and user-friendly interface for your E-Bike, providing essential ride data and control. It features a clear LCD screen and a durable plastic housing.

Image: Duendhd M6 LCD Display showing its dimensions (96mm width, 62mm height) and the 22.2mm mounting aperture.

ප්රධාන ලක්ෂණ:

• වෙළුමtagඊ ගැළපුම: 36V / 48V Universal
• සංදර්ශක වර්ගය: JN-LCD-M6
• Mounting Aperture: 22.2 මි.මී
• සම්බන්ධක වර්ගය: 5-pin Waterproof Connector
• ද්රව්ය: කල් පවතින ප්ලාස්ටික්
• වර්ණය: කළු

5. සැකසුම සහ ස්ථාපනය

Follow these steps to properly install your Duendhd M6 LCD Display on your E-Bike.

5.1 සංදර්ශකය සවි කිරීම

1. Identify a suitable location on your E-Bike handlebars. The display is designed for a 22.2 mm mounting aperture.
2. සංදර්ශකයේ සවිකරන වරහනෙහි ඉස්කුරුප්පු ලිහිල් කරන්න.
3. Position the display on the handlebar at your desired angle.
4. Securely tighten the screws to fix the display in place. Do not overtighten.

රූපය: පැත්ත view of the M6 display showing its mounting bracket and how it sits on the handlebar.

රූපය: පසුපස view of the M6 display, illustrating the cable routing from the display unit through the mounting bracket.

5.2 සංදර්ශකය සම්බන්ධ කිරීම

• Locate the 5-pin waterproof connector cable extending from the M6 display.
• Connect this cable to the corresponding 5-pin waterproof connector on your JN E-Bike controller. Ensure the connectors are aligned correctly before pushing them together firmly.
• The connection should be secure and waterproof.
• තීරණාත්මක සටහන: This display is designed exclusively for JN (JIANNUO) controllers. Attempting to connect it to a non-JN controller may cause damage to both the display and the controller. If you are unsure about your controller's compatibility, please verify its model or consult your E-Bike manufacturer.

Image: A close-up showing the waterproof 5-pin connector type used by the M6 display, alongside an SM plug for comparison. Ensure you use the correct waterproof connector.

6. මෙහෙයුම් උපදෙස්

Once installed and connected, the Duendhd M6 LCD Display provides real-time information about your E-Bike's performance.

6.1 බල ගැන්වීම සක්‍රිය / අක්‍රිය කිරීම

• To power on the display, press and hold the power button (if available on your controller or display, specific button not detailed in product info).
• බලය අක්‍රිය කිරීමට, නැවත බල බොත්තම ඔබාගෙන සිටින්න.

6.2 තොරතුරු පෙන්වන්න

The LCD screen provides various metrics to monitor your ride:

Image: The M6 LCD display showing various operational parameters including current speed (00.0 Km/h), odometer (00000 Km), run time (00:00:30), wattage (0000W), battery level (100%), and error status (ERR:08).

• වේගය: Current riding speed (e.g., Km/h).
• ODO (ඕඩෝමීටරය): ගමන් කළ මුළු දුර.
• RUN TM (Run Time): Duration of the current ride.
• වොට්: Real-time power output.
• බැටරි මට්ටම: Indication of remaining battery charge.
• STATUS / ERR: Displays system status or error codes if any issues are detected.

Note: Specific button functions for changing display modes or settings are typically controlled by the E-Bike controller. Refer to your E-Bike's main manual for detailed operational controls.

7. නඩත්තු කිරීම

• පිරිසිදු කිරීම: සංදර්ශක තිරය සහ නිවාසය මෘදු, d රෙදි කඩකින් පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
• ජල නිරාවරණය: While the connector is waterproof, avoid submerging the display. If it gets wet, dry it thoroughly before use.
• කේබල් පරීක්ෂාව: Periodically check the cable and connector for any signs of wear, damage, or corrosion.
• ගබඩා: When not in use for extended periods, store the E-Bike and display in a cool, dry place away from direct sunlight.

8. දෝශ නිරාකරණය

If you encounter issues with your Duendhd M6 LCD Display, refer to the following common problems and solutions:

If problems persist, contact your retailer or a qualified E-Bike service center.

9. පිරිවිතර

10. වගකීම් සහ සහාය

Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the retailer from whom you purchased the product. You may also refer to the official Duendhd website for general product information, if available.