VSS113 Floating Wireless Speaker
“
Specifications
- Model: VSS113
- BT version: JL5.3
- Output power (RMS): 3W
- Material: ABS
- Battery capacity: 300mAh
Product Features
- Bluetooth music playback
- Water resistant rating: IXP5
Operation Instructions
- Power on/off: Long press the power button
- Bluetooth connection: Search for BT name VSS113 on your mobile
or other devices and connect - Charging guidance: Insert USB cable into Micro charging port.
Red light indicates charging. When the red light turns off,
charging is complete.
Attention
- Use this product under normal temperature environment.
- Avoid playing in wet environments.
- Avoid damage from falling.
- Do not dismantle or repair the speaker by yourself.
- Do not throw the speaker into fire as it has a built-in
battery. - Ambient temperature for use: -10°C to 40°C
FAQ
Common Problems and Solutions:
- Issue: Device turns off after playing for a
long time.
Solution: Charge the device to full power and then
turn it on. - Issue: Device does not work well beyond the
Bluetooth range or due to obstacles.
Solution: Ensure you are within the effective
range and remove obstacles. - Issue: Cannot connect to Bluetooth.
Solution: Ensure Bluetooth is in discoverable mode
or reboot the speaker. Turn off nearby Bluetooth devices.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. The device has been evaluated to meet general
RF exposure requirement. The device can be used in portable
exposure condition without restriction.
“`
Floating wireless speaker Model NO.:VSS113
Basic Specification *BT version:JL5.3 *Output power (RMS):3W *Material: ABS *Battery capacity:300mAh
Product Feature *Bluetooth music playback *IXP5
Instruction of Buttons
*Charging time:1-2 H *Working hour:1-2 H *Working range:10M *Product Size: 74.3*74.3*54mm
1.Power on/off. 2.Charging port.
Operation Instruction 1.Power on/off:Long press . 2.Bluetooth connection:And use mobile or other devices to search the BT name “VSS113” and connect it. 3.Charging guidance:Insert USB cable to Micro charging port, Red light indicates charging,when red light off, the charging finished.
1
Common problems and solving methods 1. After playing for a long time,the device will often turn off in auto.
The battery is insufficient, please charge it to full power and them turn on. 2. The device does not work very well whether beyond the effective distance of Bluetooth connection,or some barriers on there. 3. Can not connect the Bluetooth Is the Bluetooth in search-able mode or not,or reboot the speaker. There are too many Bluetooth devices around you, try to turn off them.
Attention 1. Use this product under normal temperature environment. 2. Do not play in the wet environment. 3. Avoid the damage of falling. 4. Do not dismantle or repair the speaker by yourself. 5. Built-in battery,do not throw the speakers in the fire. 6. Ambient temperature for use: -10~40
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
3
Documents / Resources
 | ShenZhen VSS113 Floating Wireless Speaker [pdf] User Manual 2A5KI-VSS113, 2A5KIVSS113, VSS113 Floating Wireless Speaker, VSS113, Floating Wireless Speaker, Wireless Speaker, Speaker |