SP803E Wi-Fi Music LED Controller
“
Specifications:
- Model: SP803E Wi-Fi Music LED Controller
- Module: ESP32
- Voltage Input: 5V DC to 24V DC
- Output: SPI and PWM
- Compatibility: Various LED strips
Product Usage Instructions:
1. Download and Install the App:
iOS: Search and download the WLED or WLED Native App from the
App store. Android: Download the APK from the website here.
2. Wi-Fi Configuration:
Go to your phone’s Wi-Fi settings, connect to WLED-AP, and enter
the password: wled1234. After a successful connection, the device
will automatically redirect you to the WLED control page. Follow
the on-screen instructions to set up your Wi-Fi network
connection.
3. Add Device:
Open the App, tap the + icon in the upper-right corner, select
DISCOVER LIGHTS, choose Found WLED, return to the list, and tap the
added WLED device to enter the control interface.
4. Light Type Configuration:
SPI Light Configuration: Click Config > LED
Preferences > Hardware Setup > IC Type > GPIO: 16.
Configure other LED strip parameters as needed and save.
PWM Light Configuration: Click Config > LED
Preferences > Hardware Setup > PWM RGB > GPIOs: 25 26 27.
Save your settings.
5. Analogmic Configuration:
Click Config > Usermods > Disable all GPIOs under
Digitalmic and set Type to Generic Analog. Set Analogmic GPIO to 36
(R/O), check AudioReactive Enabled, check Reboot after save, click
Save. Wait for the controller to reboot and the App to reconnect
automatically. Power cycle the controller (power off and on with a
10-second interval).
Frequently Asked Questions:
Q: How can I confirm successful configuration for
Analogmic?
A: You can confirm successful configuration on the Info page.
Once Analogmic is correctly set, music effects in the Effects menu
will react to sound through the onboard Analogmic.
“`
SP803E Wi-Fi Music LED Controller Instructions
WLED-ESP32
1. Brief:
SP803E Wi-Fi Music LED Controller is a high-performance LED controller based on the ESP32 module and deeply integrated with the open-source WLED project, to deliver an exceptional lighting control experience. It supports multiple data output and features a high-power, strong-drive circuit, making it suitable for a wide range of lighting ambiance applications.
2. Features:
Built upon a high-performance ESP32 module to ensure stable and efficient system operation.
Supports wide voltage input from 5V DC to 24V DC, compatible with various power supply environments.
Provides both SPI and PWM output to match with different types of LED strips.
High-power drive output, utilizes high-power MOSFETs for the PWM circuit and external current amplification chips on the SPI ports to ensure enhanced driving performance.
Equipped with an on-board serial auto-download circuit for quick and convenient software flashing.
Features a high-sensitivity on-board analog MIC circuit for precise synchronization of lighting with music.
Designed with protection against reverse power connection, backfeeding, and data port protection, ensuring comprehensive safety and reliability of the controller.
3. Operating Instructions:
1. Download and Install the App:
iOS: Search and download the WLED or WLED Native App from the App store. Android: Download the APK from the website. https://github.com/Aircoookie/WLED-App/releases
2. Wi-Fi Configuration:
Go to your phone’s Wi-Fi settings, connect to “WLED-AP”, and enter the password: wled1234. After a successful connection, the device will automatically redirect you to the WLED control page: 4.3.2.1. Tap “Wi-Fi SETTINGS” “Scan” “Select a 2.4G Wi-Fi network” “Enter password” “Save & Connect”.
3. Add Device:
Open the App, tap the ” + ” icon in the upper-right corner select “DISCOVER LIGHTS” choose “Found WLED” return to the list and tap the added WLED device to enter the control interface.
4. Light Type Configuration:
SPI Light: (IO16) Click “Config” “LED Preferences” “Hardware Setup” “IC Type” “GPIO: 16” configure other LED strip parameters as needed “Save”.
PWM Light: (IO25, 26, 27)
Click “Config” “LED Preferences” “Hardware setup” “PWM RGB” “GPIOs: 25 26 27” “Save”.
LED Preferences Interface:
SPI Light Configuration:
PWM Light Configuration:
5. Analogmic Configuration:
Click “Config” “Usermods” Disable all GPIOs under Digitalmic and set Type to “Generic Analog” Set Analogmic GPIO to 36 (R/O) Check AudioReactive “Enabled” Check “Reboot after save” Click “Save” Wait for the controller to reboot and the App to reconnect automatically Power cycle the controller (power off and on with a 10-second interval).
Note: You can confirm successful configuration on the Info page. Once Analogmic is correctly set, music effects in the Effects menu will react to sound through the onboard Analogmic.
4.Peripheral Description:
Key
Short Press: Turn the light ON/OFF; Long Press (1s): Switch light color; Long Press (10s): Reset controller.
Indicator Light
The green indicator remains steadily lit after powering on.
MIC
Power Input
5.5/2.1mm DC Power Input
Serial download interface
On-board serial auto-download circuit interface allows you download the software to the ESP32 module via the Type-C port(avoid using power-only Type-C cables).
LED Signal Output
( Schematic Diagram )
5.Technical Parameters / GPIO Configuration:
Technical Parameters:
Working Voltage:
5V ~ 24V DC
Working Current:
30mA ~ 150mA
Working Temp:
-10~ 40
LED Type:
SPI / PWM
PWM Single Channel Maximun Output Current:
6A
PWM Total Maximun Output Current:
12A
Dimension:
118mm * 45mm * 15mm
GPIO Configuration:
SPI:
IO16
MIC:
IO36 (R/O)
PWM:
IO25, 26, 27
Key:
IO0
6.Wiring:
PWM Light: (IO25, 26, 27) Power Supply
9&& 3:0 3:0 3:0
SPI Light: (IO16) Power Supply
9&& ‘$7$ *1’
Documents / Resources
 | Shenzhen SP803E Wi-Fi Music LED Controller [pdf] Instruction Manual 2ATV8SP803E, sp803e, WLED-ESP32, SP803E Wi-Fi Music LED Controller, SP803E, Wi-Fi Music LED Controller, Music LED Controller, LED Controller, Controller |