S3 Traffic Recorder 3 Channel Camera
“
Product Specifications:
- Automatic recording function: Starts recording when the car
engine is on and stops when the engine is turned off. Recordings
are saved on a TF card in segments. - Photo taking function: Allows for capturing photos by pressing
the M key.
Product Usage Instructions:
1. Automatic Recording Function:
When the car engine is started, the recorder will automatically
begin recording. When the engine is turned off, the recorder will
save the recorded content and power down. Recorded images are saved
in segments on the TF card. If the TF card is full, the recorder
will overwrite the earliest recorded images.
2. Photo Taking Function:
To capture a photo, short press the M key to enter photo-taking
mode.
FAQ:
Q: What should I do if the TF card is full?
A: The recorder will overwrite the earliest recorded images when
the TF card is full to continue recording new footage.
Q: How can I capture a photo with the device?
A: Press the M key to enter photo-taking mode and capture a
photo.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to certain conditions to prevent harmful interference.
Users are advised to follow specific guidelines to ensure proper
operation.
Radio Frequency Exposure Statement:
The device meets general RF exposure requirements and can be
used in various exposure conditions. Maintain a minimum separation
distance of 20cm to ensure safe usage.
“`
2/3
Instructions for the Use of Traffic Recorder
3 Channel Camera
3.16 IPS TYPE-C 5V1A TF 64G Class10 ( :JPG AVI FHD1080P 30fs
1OK 2M 3
4 5 6
7 8TF 9)
10 11
12
13
14 15
1OK
/
2M /
/
3/ / 4 5 6 , . 1. 2. 3 TF TF Class10 4GBTF 64GB 4 5 6 A. B. 7
8 1: TF TF 2: M OK 3: , 30 4: 5: M OK M 6: OK 7: R , :TF :
SDHC TFTFC10 “” :TF “” TF : : “EV” : “” “50Hz” “60Hz” :
15
(1)
(2)
15 B (1)
(2)
(3)
(4) /
/ 20cm
Display screen: 3.16 inch IPS high-definition screen Power interface: TYPE-C 5V/1A TF card: supports up to 64G Class10 Rear camera: supported (optional) Speaker: supported Photo format; JPG Video format: AVI Battery type: polymer lithium battery Language: Supports multiple languages Loop recording: supported, no seconds missed Recording function: supports Night vision fill light: supported (manually turned on) Mobile detection: supported Recording resolution: FHD1080P 30f/s Introduction to Key Functions
1) OK key
2) M-key
3) Power button 4) Flip up key
5) Flip down key 6) Front camera
7) Horn
8) TF card slot
9) Reset key
10) Power
interface
11) Rear view camera interface
12) Bracket clamp 13) Display screen
14) In car camera 15) Infrared lamp
1)OK key: The menu interface is the
Product specifications
confirm button, the recording interface is the start/stop recording button, and the photography interface is the photography button. 2) M key: Short press is the mode key to switch between recording/photography/playback modes, long press is the menu key, and short press is the one key lock function in recording mode to protect the current recorded file and prevent it from being repeatedly overwritten. 3) Power button: Long press to turn on/off the machine, short press to turn on/off the night vision light in standby mode 4) Flip up button: The menu interface can be flipped up. 5) Flip down button: The menu interface can be flipped down, and short press in standby mode can switch camera screen functions. 6) Reset button: If the recorder crashes or experiences abnormal operation, short press the reset button to shut down, and then press the power button to restart the machine Installation Guide 1. Please check and pull the camera to ensure it is functioning properly before proceeding with installation. 2. Turn off the car engine. 3. Insert the TF card into the recorder card slot. [Note] Please use a high-speed TF card (Class10 or above) with a capacity of no less than 4GB, and the TF card can support up to 64GB. 4. Fix the recorder onto the front windshield of the car through a
bracket. 5. Insert the car charger into the car cigarette lighter. [Note] When wiring, the charging extension cable can be laid along the edge of the car door frame and under the carpet inside the car. 6. Install the rear camera at the rear of the vehicle, paying attention to the up and down direction during installation. The wiring can be buried along the edge of the vehicle roof. [Note] There are two installation methods for the rear camera: A. Absorbed above the rear glass of the car, it can be installed by hand (unable to achieve reverse visibility function, can only record real-time video of the rear of the car). B. Find professional installation personnel to install it above the license plate frame, and the red line of the camera needs to be connected to the reverse light power supply (which can achieve reverse visibility function). 7. Adjust the lens position to ensure the best shooting angle. 8. Start the engine and check if the machine is functioning properly. Function Introduction
1. Automatic recording function: Start the car engine, the recorder will automatically start and activate the recording function. Turn off the car engine, the recorder automatically saves the recorded content and shuts down. The recorded images are segmented and saved on the TF card. When the TF card is full, the recorder will first overwrite the earliest recorded images. 2. Photo taking function: Short press M to enter the photo taking mode, and
short press the OK key to take a photo. 3. Movement detection function: When this function is turned on, the machine enters the camera mode. When an object moves, the machine automatically enters the recording mode. After 30 seconds, the system stops recording. 4. One click lock function: This device has a one click lock function, which can lock the images that need to be retained without being repeatedly overwritten. 5. Date and time setting: Long press the M key to enter the menu setting, find the time setting menu to enter the correct setting, then press the OK key to save, and finally short press the M key to exit the menu setting. [Note] For effective recording and evidence collection, please set the correct date and time immediately before using this device. 6. File playback: Press the OK key to play back in playback mode. 7. Reverse visibility function: The car charging machine will automatically start recording mode. When switching to R gear in recording mode, the screen will automatically switch to the rear view lens, displaying the reverse image. After the reverse visibility is completed, the machine will automatically return to recording mode. Troubleshooting: Under normal operating conditions, if there is a problem with the product, please refer to the following methods to solve it: Cannot take photos or videos: Check if the TF card has enough space and is locked.
When recording, it will automatically stop: Due to the huge amount of high-definition video data, please use a high-speed TF card compatible with SDHC, which will have a C10 symbol. When replaying images and videos, a “file error” prompt appears: TF card encountered an error while storing data, resulting in incomplete files. Please use the camera’s “format” function to reformat the TF card. The captured image is shrouded in mist: please check the lens for any dirt or finger marks; Before shooting, wipe the lens with lens paper. When shooting scenes such as the sky and water, the image is very black: in large contrast scenes, it will affect the camera’s exposure function, which can be corrected by adjusting the “EV” value in the machine settings menu. Horizontal stripe interference in the image: This is caused by setting the wrong “light source frequency”. Please set it to “50Hz” or “60Hz” according to the local power supply frequency. Shutdown: After the shutdown, please short press the reset button
FCC Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received,including
nterference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device under Part 15 of the FCC Rules.These limits are designed to protect reasonably against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and,if not installed and used by the instructions, may cause harmful interference to radio communications.However,ther e is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on.In that case,the user is encouraged to try to correct the interference by one or more of the following measures:
(1)Reorient or relocate the receiving antenna.
(2)Increase the separation between the equipment and receiver.
(3)Connect the equipment to an outlet on a circuit different from the receivers.
(4)Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements.The device can be used in fixed/mobile exposure condition.The min separation distance is 20cm.
Documents / Resources
 | Shenzhen S3 Traffic Recorder 3 Channel Camera [pdf] Instruction Manual 2BD3N-S3, 2BD3NS3, S3 Traffic Recorder 3 Channel Camera, S3, Traffic Recorder 3 Channel Camera, Recorder 3 Channel Camera, 3 Channel Camera, Camera |