Document

USER MANUALShenzhen Kabest Technology KBW1905 Wireless Charging Desk Lamp

Introduction:

wireless charging desk lamp is an intelligent product Simply designed,
It emits various lighting effects with different colour temperature. It also has a built-in wireless charger which is compatible with any wireless phone and device.
It is integrated with USB output function which makes charging mush easier.
Wireless charging Applicable Devices:

  • Devices with built -in wireless charging receiver
  • Devices with reserved wireless charging interface beside its battery
  • Devices with wireless charging receiver in its protection case

Note: All devices must be wireless phone

Specifications:

Input: 5V/2.5A,9V/2A
Desk Lamp Output: 10W
LED QTY: 62pcs x 2835LED
CRI: 85max
Center Luminance: 800Lux
Color Temperature: 3000&3400&4500&5600K LED
Longevity: 50,000 hrs
Wireless Charging Output: 5V/1A9V/1.1A
Material: Bamboo
Transferring Distance: ≤8mm
Efficiency: ≥76%
Size: 121*169*380mm

Shenzhen Kabest Technology KBW1905 Wireless Charging Desk Lamp - charger

How to use:

  1. Connect the Lamp using the supplied power cable and a wall adaptor. To turn on the lamp. Press the power button once.
  2. Light adjustment:
    You can adjust the brightness as well as the shade of the light using the Various touch indicator
    – Press the Sun icon to change the shade
    – Long press the top arrow to increase the brightness
    – Long press the down arrow to decrease the brightness
  3. When using the wireless charging function, place phones with wireless receiver onto the wireless charging area.

Shenzhen Kabest Technology KBW1905 Wireless Charging Desk Lamp - wifi

At this time, the wireless charging indicator turns on and flickers to indicate that wireless charging is working properly.
The indicator turns off after the phone is removed

Notes:

  1. To ensure effective usage please use an 5V/2.5A adaptor and good quality cable.
  2. Please keep it away from water or other liquid.
  3. Power off the item before it is cleaned.
  4. Keep the working temperature at 0-45℃.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Documents / Resources

Shenzhen Kabest Technology KBW1905 Wireless Charging Desk Lamp [pdf] User Manual
KBW1905, 2A7XD-KBW1905, 2A7XDKBW1905, KBW1905 Wireless Charging Desk Lamp, Wireless Charging Desk Lamp

Leave a comment

Your email address will not be published. Required fields are marked *