Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

QUICK START GUIDE

To stay current on our latest updates and features,
DOWNLOAD THE SHARKCLEAN™ APP.
Search “SharkClean” in the app store.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

CONNECTING THE SHARKCLEAN™ APP AND ROBOT

Search SharkClean in the app store
and download to get started.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

  • Open the SharkClean app
    and set up your account.
  • Hold down Dock and Clean
    buttons simultaneously
    until your Shark prompts
    you with audio, and Wi-Fi
    light ( ) on robot blinks
  • Exit the app and open
    Wi-Fi settings.
  • Select your robot (Ex. Shark_
    RVXXX) from the menu.
  • Exit settings and return to
    the SharkClean app.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

  • Select your home Wi-Fi network
    and enter your password.
    NOTE: Most networks are 2.4 GHz. The
    app will not work on 5 GHz network.
  • When pairing is complete, the
    Success screen will appear
  • CAN’T CONNECT?
    Restart your phone
  • Turn off phone, wait a few minutes, then
    turn it back on and connect to Wi-Fi.
    Reboot your robot
  • Make sure the power switch on the
    back of the BASE is in the ON position.
  • Press the power switch on the side
    of the robot to the OFF position.
    Wait 10 seconds, then press it to
    the (I) ON position.
    Reboot your router
  • Unplug the router power cable for 30
    seconds, then plug it back in. Allow
    several minutes for your router to
    reboot completely.
  • Two Easy Steps If You’re Stuck:
    Having trouble connecting to your
    robot? Call 1-888-228-5531 for robot
    support.
    For additional help, visit: sharkclean.
    com/support
  • How-to Videos
  • FAQs
  • Troubleshooting
  • Tips & Tricks
    Smart Home Setup
    To set up voice control using Google
    Home or Amazon Alexa, visit
    sharkclean.com/app for instructions.
    CAN’T CONNECT?
    Restart your phone
  • Turn off phone, wait a few minutes, then
    turn it back on and connect to Wi-Fi.
    Reboot your robot
  • Make sure the power switch on the
    back of the BASE is in the ON position.
  • Press the power switch on the side
    of the robot to the OFF position.
    Wait 10 seconds, then press it to
    the (I) ON position.
    Reboot your router
  • Unplug the router power cable for 30
    seconds, then plug it back in. Allow

SETUP
Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

  • Remove protective film from robot and base.
  • Attach the side brushes to the posts on the bottom
    of the robot. The side brushes are located in the
    red packaging.
  • Turn on the power by pressing the button on the
    side of the robot to the (I) ON position

Find a permanent location for the base. Place it
with its back against a wall, in an area with a good
Wi-Fi signal. Remove any objects that are closer
than 3 ft. from either side of the base, or closer
than 5 ft. from the front. For best results, set up
base on bare floor, or on the SharkMat

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

  • Plug the base power cord into an electrical outlet.
  • Turn the power switch on the back of the base to
    the (I) ON position.
    The green power indicator light on the base will
    illuminate when the base has power.

To charge, place robot with its BACK side against base.

  • Turn power switches on BOTH robot and base to (I)
    ON position.
  • When charging begins, robot will beep and BLUE charging
    indicator light on base will PULSE. When robot is fully
    charged, light will turn SOLID blue.
    NOTE: Every time the robot returns to the dock, it will make a
    loud noise as it empties debris. This is normal and no cause for

OPTIMIZING YOUR HOME FOR CLEANING

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Clear cords and remove small objects like toys,
clothing, or drapes from floors. Open interior doors
in rooms you want your robot to clean. For best
results, run your robot in well-lit conditions.

WHAT TO EXPECT

As your robot learns your home, you may need to make some small adjustments to optimize performance

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

It will take you robot multiple runs to generate
your interactive map, so run it frequently to get the
best map.

For a constant state of clean™, set up a cleaning
schedule in the app.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

While your robot is cleaning, do not pick it up
and move it, or move the charging base—this will
impact the robot’s ability to map your home.

During the first few weeks, your robot will empty
more often than usual. Check the fill level regularly.
Home environments vary, and the bin may fill up
quicker in some homes.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

For best results, run your robot in well-lit
conditions. If you run your robot at night, keep
the lights on in the areas to be cleaned.

© 2020 SharkNinja Operating LLC. BOTBOUNDARY, SHARK, and SHARK IQ ROBOT are registered trademarks of SharkNinja Operating
LLC. CONSTANT STATE OF CLEAN, SHARKCLEAN, and SHARK IQ ROBOT SELF-EMPTY are trademarks of SharkNinja Operating LLC.
APPLE, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of
Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY,
the Google Play logo, and Android are trademarks of GOOGLE LLC.
AV1010AE_QSG_E_REV_Mv2  Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

 

Read More About This Manual & Download PDF:

 

Shark IQ Robot Sharkclean App and Robot User Manual – Optimized PDF
Shark IQ Robot Sharkclean App and Robot User Manual – Original PDF

Leave a comment

Your email address will not be published. Required fields are marked *