BC BTA2000
Bluetooth Noise
Canceling Headphones
Bluetooth Headphone
Specifications:
Driver Unit: 40mm
Sensitivity: 103dB+/-3dB
Frequency: 20H2-20KHz
Impedance: 32 ohms
Cord Length: 4ft./1.2M
Battery: Lithium-ion
Communication system: Bluetooth Specification version 5.3 Battery Capacity. 200mAnh
Operating Temperature: 0 °C to 40 °C
Radio Frequency: 2.402 GHz-2.480 GHz
Note: Actual playback times and charge times are approximate and based on 50% volume&ANC off, and the product is fully charged. Battery performance may be affected by multiple factors including but not limited to ambient temperature, listening volume, and/or distance from the source audio device.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Bluetooth Pairing/Connection:
Turn on the product. Bluetooth mode will be activated automatically. Enable bluetooth function on your media device. Search the bluetooth device named BTA2000Click or tap to connect (pair). After successful connection (pairing) you will hear a voice say “Connected”. Now you can play music, or use bluetooth phone functions.
Key Functions:
On/Off: Press and hold the 
for 5 seconds to turn on/off.
Music Pause: Pressthe button to pause playing, and press the again to resume playback.
Next Song : Press andholdthe + button. Previous Song : Press and hold the – button.
Volume Increase: Press the + button. Volume Reduction: Press the – button.
Answer/Hang-up: Press the a button to answer when the call is incoming, and press it again to hang up.
Rejection: Press and hold the button for about 2 seconds, then release it.
ANC ON/OFF: Press the • button once to turn on/off the ANC function, you will hear a voice “ANC on” and green light on means ANC on, ANC can only be used when headphone is power on.
Warnings & Precautions
- CAUTION: To prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC receptacle. Insert the plug fully into the receptacle.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.
- WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote.
If the unit is displaying erratic behavior move away from any fluorescent lighting. as it may be the cause.
Included Cables
- 3.5mm (1/8) male to male AUX
Plug one side of the aux cable into the headphone port and the other into vour media device and use theheadset while it is powered off. All Bluetooth functionality is disabled when you do this.
- USBC,DC 5V USB
To charge device Plug the small side of the USBC cable into the usb charging porton your headsetand plug the large enointo usb port on a computer, or ac adapter (not induded). BTA2000: when the product is charging, the LED light will keep in red color, when the product is fully charged, the LED light will turn blue.
Important Safety Instructions
Charging your device
Only use a power adapter with applicable country regulations and international and regional safety standards. Other power adapters may not meet applicable safety standards, and using such adapters could pose a risk of death or injury.
Avoid prolonged skin contact with the charging cable and connector when the charging cable is connected to a power source because it may cause discomfort or injury. Sleeping or sitting on the charging cable or connector should be avoided.
- Read these Instructions.
- Keep these Instructions
- Heed all Warnings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Use in accordance with the manufacturer’s instructions
- Do not charge near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Discontinue use if damaged.
- Protect the cord from being walked on or pinched particularly at plugs, convenience receptacles, to the point where they exit from the device.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms and when charging is completed.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Headphones are capable of producing sound levels which can be harmful to your hearing. Do not listen at high volume for prolonged periods of time. Headphones may block out surrounding sounds. Never wear headphones while operating a vehide. Headphones may block out surrounding sounds.
Never wear headphones while operating a vehide. Use with caution. User assumes all risks associated with the use of this product.
WARNING
- CAUTION: To prevent electric shock, use only compatible and certified USB charging devices.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may damage your device.
- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- WARNING: Always store in a cool dry location.
- WARNING: Headphones are capable of producing sound levels which can be harmful to your hearing.
Do not listen at high volume for prolonged periods of time. Headphones may block out surrounding sounds. Never wear headphones while operating a vehide. Use with caution. User assumes all risks associated with the use of this product. - WARNING: Don’t over insert into ear canal. Discontinue use at the first sign of discomfort. Only usedesigned pads. Do not use dirty or damaged ear pads. Contains small parts that may presenta choking hazard. Keep away from children.
USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
90-Day Warranty
Sentry warrants this product to be free from defects in materials and workmanship for 90-days from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose a check for $5.00 for shipping & handling.
FCC ID: 2ACP4BTA2000 Model#BTA2000
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sentry Industries Inc is under license. Other trademarks and trade names are those of their respective owners.
Sentry Industries inc declares that radio equipment BTA2000 is in compliance with Directive 2014/53/EU.The EU declaration of confirmity is available at https://sentryindustries.com/european-declaration-of-conformity/ Confirmity with Directives This product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
Supplier’s Declaration of Conformity 47 CFR 47 CFR Part 15.21, 15.105(b)
Compliance Information
Sentry Bluetooth Earphone and Headphone
Responsible Party –
Sentry Industries Inc
One Bridge street, Hillburn, NY 10931
Tel +1 845 753 2910
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | SENTRY BTA2000 Bluetooth Noise Canceling Headphones [pdf] User Manual 2ACP4BTA2000, 2ACP4BTA2000, bta2000, BTA2000 Bluetooth Noise Canceling Headphones, BTA2000, Bluetooth Noise Canceling Headphones, Noise Canceling Headphones, Canceling Headphones, Headphones |