SENSIRION SFC6000, SFM6000 Mass Flow Controller, Meter
Product Information
The SFC6000 / SFM6000 is a Mass Flow Controller / Meter designed for precise measurement and control of gas flow. It comes with exchangeable fittings that can be easily modified.
Important Note: Most push-in fittings available on the market are not compatible with O2-enriched gasses. Please ensure material compatibility before using push-in fittings with O2-enriched gasses.
Exchangeable Fittings
To modify the fittings of SFC6000 and SFM6000, follow these steps:
- Remove the old fittings:
- For the front fitting, pull out the metal ring from the top.
- For the rear fitting, pull out the metal ring from beneath.
- Remove both metal rings:
- For the front fitting the metal ring it is to be pulled out from the top.
- For the rear fitting it must be pulled out from beneath.
- Remove the fittings by pulling them out. You can use any suitable tool as an aid (e.g. sharp tweezers) to help with the removal.
- Remove both metal rings:
- Remove the fittings:
- Use a suitable tool (e.g. sharp tweezers) to help with the removal.
- The metal ring for the rear fitting must be accessed from below.
- Insert the new fitting
- Insert the metal rings in the correct manner. From the top for the front fitting and from beneath for the back fitting.
- Insert the new fittings:
- Use an appropriate tool to assist in pulling out the fitting.
- Insert the new fitting.
- Insert the metal rings in the correct manner: from the top for the front fitting and from beneath for the rear fitting.
Compatible Fittings
The following table lists fittings compatible with SFC6000 and SFM6000:
The table below lists fittings compatible with SFC6000 and SFM6000.
They can be bought from: https://www.festo.com/
| Cartridge | Model |
|---|---|
| QSPK18… | QSPK18-4 |
| QSPK18-6 | |
| QSPK18-8 | |
| QSPK18-10 | |
| QSPKG18-8 | |
| QSPKG18-10 | |
| QSPLK18… | QSPLK18-4 |
| QSPLK18-6 | |
| QSPLK18-8 | |
| QSPLK18-10 | |
| QSPLKG18-8 | |
| QSPLKG18-10 | |
| QSPLLK18… | QSPLLK18-4 |
| QSPLLK18-6 | |
| QSPLLK18-8 | |
| QSPLLK18-10 | |
| QSPLLKG18-8 | |
| QSPLLKG18-10 |
You can purchase these compatible fittings from the official website: https://www.festo.com/
Documents / Resources
 | SENSIRION SFC6000, SFM6000 Mass Flow Controller, Meter [pdf] Instruction Manual SFC6000, SFM6000, SFC6000 SFM6000 Mass Flow Controller Meter, SFC6000 Mass Flow Controller Meter, SFM6000 Mass Flow Controller Meter, Mass Flow Controller Meter, Mass Flow Controller, Mass Flow Meter, Mass Flow, Meter |