Sennheiser HD-202 II Professional Headphones
General Description
The HD 202 closed, dynamic hi-fi stereo headphones are the ideal partner for DJs and powerful modern music, providing good insulation against ambient noise and a vivid, crisp bass response. The rugged lightweight headphones have a secure fit and can be used for both mobile sources and home (mini) hi-fi systems. When out and about, a convenient cord take-up lets you adjust the headphone cable to the required length.
Technical Data
- Frequency response ………………….. 18–18,000 Hz (– 3 dB/1 kHz)
- Transducer principle………………………………………… dynamic, closed
- Nominal impedance …………………………………………………………..32 Ω
- Characteristic SPL ……………………………….115 dB (at 1 kHz, 1 Vrms)
- THD……………………………………………………………………………….. < 0.5 %
- Ear coupling ……………………………………………………………. supra-aural
- Weight (without cable)……………………………………….approx. 130 g
- Connector ……………………….. 3.5 mm Ø stereo mini jack plug with adaptor to 1/4” (6.3 mm) stereo jack plug
- Connection cable……………………………………. 3 m, OFC copper cable
Features
- Closed, supra-aural, dynamic hi-fi stereo headphones
- For DJs, ideal for both mobile sources and home mini hi-fi systems Good attenuation of ambient noise
- Earcups can be removed from the headband
- Specially designed damping perforation ensures powerful bass response Lightweight diaphragm material with “turbine” embossing for extremely low bass
- Powerful neodymium magnets and lightweight diaphragms for high sound levels
- Powerful bass and increased signal levels for modern rhythm-driven music
- Clips to the belt: cord take-up for adjusting the cable length when listening on the move
Recommended Accessories
HZR 62 stereo volume control Cat. No. 005248
Replacement Parts
Ear pads (1 pair) Cat. No. 085708
FAQ’s
Sennheiser headphones have a sensitivity of 115 dB/mW and an impedance of 32 ohms. The frequency response spans the range of 18 to 18000 Hz.
For 15 minutes, leave the headset’s batteries out and the system powered off. This provides an opportunity for the internal electronics unit to reset to factory defaults. The wireless headphones will need to be repaired with the transmitter after the internal electronics have been reset.
Sound: The Sennheiser HD 202 offers good value for the money and works well with most musical genres. They are relatively lightweight yet very strong, and loud, and offer a deep, tight bass response.
One of the best-sounding headphones in the world is those made by Sennheiser. Anyone can use Sennheiser headphones, and because they are built of high-quality materials, they will last for a very long period.
The greatest open-back studio headphones we’ve tested are the Sennheiser HD 202 II. Instead of recording, open-back headphones are a great alternative for mixing.
Even in the noisiest situations, you can listen to your favorite music or audiobooks in peace with headphones equipped with Sennheiser’s exclusive active noise-canceling technology.
The HD202s are fairly simple to fix and only require a small amount of tricky soldering.
When the touchpad is facing you and both ear cup joints click, turn the ear cups inward. 2. The LED display flashes red three times and the audio prompt “Power off” is audible. The headphones are disconnected.
The Sennheiser Sport True Wireless earbuds are a good option if you enjoy working out and like to be aware of your surroundings. These earbuds provide all the features that the majority of athletes want, including outstanding sound, dust and waterproofing, and a secure fit.
The HD 202 II is an improved version of the HD 202.
The HD 205 has a different headband and a different cable. The cable of the HD 205 is coiled, while the cable of the HD 202 is straight.
The HD 212 has a different headband, a different earcup, and a different cable. The cable of the HD 212 is coiled, while the cable of the HD 202 is straight.
The PX 200-II has a different headband, a different earcup, and a different cable. The cable of the PX 200-II is coiled, while the cable of the HD 202 is straight.
The PX 100-II has a different headband, a different earcup, and a different cable. The cable of the PX 100-II is coiled, while the cable of the PX 200-II is straight.
The headband may be adjusted to fit your head comfortably and provide the finest sound quality. Make sure the headband of your headphones runs over the top of your head. The ear cups have marks that read R for the right side and L for the left side.
