SENA P905379 Spider ST1 Mesh Intercom Headset User Guide

SPIDER ST 1
MOTORCYCLE MESH COMMUNICATION SYSTEM

QUICK START GUIDE
1.1.0

Downloadable Sena Software

Download the SENA MOTORCYCLES App at Google Play Store or App Store.

SENA MOTORCYCLES

Download the following items at sena.com.

	Firmware
	Sena Device Manager • Firmware upgrade • Device configuration setting
	Quick Start Guide, User’s Guide

Product Details

Installation

For more information about installation, refer to the User’s Guide.

Using the Clamp Unit

Using the Glued Surface Mounting Plate

Installing the Speakers

Installing the Wired Boom Microphone

Installing the Wired Microphone

Mesh Intercom Antenna

Pull the Mesh Intercom Antenna outwards slightly to unfold it.

Icon Legend

	Tap button/Jog Dial the specified number of times
	Press and Hold button/Jog Dial for the specified amount of time
	Rotate Jog Dial clockwise (right) or counterclockwise (left).
	Rotate while Pressing Jog Dial clockwise (right) or counterclockwise (left).
	Audible prompt

Basic Operations

Checking the Battery Level

Phone Pairing

When you initially turn on the headset:

② Select SPIDER ST1 in the list of Bluetooth devices detected.

• For more information on phone pairing, refer to the User’s Guide.

Using the Phone

Music Control

Mesh Intercom™

Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.

For more information on Mesh Intercom, refer to the User’s Guide.

Mesh Intercom On

Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.

Open Mesh

Channel Setting (Default: channel 1) in Open Mesh

① Enter into the Channel Setting.

Note: You can use the SENA MOTORCYCLES App to change the channel.

Group Mesh.

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.

1) Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.

① Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.

② When Mesh Grouping is completed, the users (You, B, and C) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.

2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.

① One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh…

② When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.

Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a Mesh Intercom.

Reset Mesh

If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).

Configuration Menu
Troubleshooting

Note: Fault Reset will not restore the headset to the factory default settings.

Quick Reference

TYPE	OPERATION	BUTTON COMMANDS
Basic Operations	Power on /Power off
Basic Operations	Volume up / Volume down

Mobile Phone	Answer phone call
	End phone call
	Reject phone call
	Voice Dial
Music	Play/Pause music
	Track forward
	Track backward
Mesh Intercom™	Mesh Intercom on/off
	Channel setting
	Mesh Grouping
	Reset Mesh
	Enable/Disable Mic